Influence of Ni concentration on electrochemical and crystallographic properties of La0.25Sr0.25Ca0.4Ti1−xNixO3− solid oxide fuel cell anode
Source abstract
Abstract
Abstract In this work, we studied the effects of Ni-doping level on the catalytic activity, stability and mobility of A-site cations of the La0.25Sr0.25Ca0.4TiO3−δ (LSCT) fuel electrode. Results indicate that Ni concentration in B-site influences the phase properties, element ratios on the surface, element mobility during preparation, conductive properties and catalytic activity of electrode significantly. The best performance was measured for La0.25Sr0.25Ca0.4Ti0.95Ni0.05O3−δ having very low polarization resistance value 0.084 Ω cm2 at 850 °C (at OCV). The results of the experiments indicate excellent stability of the material – Rp remained stable during the 120 h test. Ni-doping also stabilizes the LSCT structure and makes it more stable in different gas atmospheres and suppresses segregation of CaO to the electrode surface. Moreover, it even suppresses significantly A-site cation mobility during electrode processing, which was one of the most relevant problems with pure LSCT. The accumulation of Sr at the zirconate electrolyte surface and formation of SrZrO3, which was one of the vital issues observed for undoped LSCT, has been avoided in the case of Ni-doped materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Redox dynamics of sulphur with Ni/GDC anode during SOFC operation at mid- and low-range temperatures: an operando S K-edge XANES study10.1016/j.jpowsour.2013.03.187 ↗
2. Sulfur-tolerant anode materials for solid oxide fuel cell application10.1016/j.jpowsour.2007.03.026 ↗
3. Direct oxidation of hydrocarbons in a solid-oxide fuel cell10.1038/35005040 ↗
4. Nickel coarsening in annealed Ni/8YSZ anode substrates for solid oxide fuel cells10.1016/S0167-2738(00)00650-0 ↗
5. Near ambient pressure X-ray photoelectron - and impedance spectroscopy study of NiO - Ce0.9Gd0.1O2-δ anode reduction using a novel dual-chamber spectroelectrochemical cell10.1016/j.jpowsour.2017.12.080 ↗
6. A review of RedOx cycling of solid oxide fuel cells anode10.3390/membranes2030585 ↗
7. The mechanism behind redox instability of anodes in high-temperature SOFCs10.1149/1.2048228 ↗
8. Advanced anodes for high-temperature fuel cells
9. Ishihara · 2009
10. Sulfur tolerant anodes for SOFCs10.1149/1.1627452 ↗
11. Evaluation of Ca doped La0.2Sr0.7TiO3 as an alternative material for use in SOFC anodes10.1149/2.001212jes ↗
12. La and Ca-doped A-site deficient strontium titanates anode for electrolyte supported direct methane solid oxide fuel cell10.1149/2.0201712jes ↗
13. Thermal, electrical, and electrocatalytical properties of lanthanum-doped strontium titanate10.1016/S0167-2738(02)00140-6 ↗
14. Savaniu · 2009 · 2213
15. B site doped strontium titanate as a potential SOFC substrate10.1007/BF02375477 ↗
16. SrZrO3 formation at the interlayer/electrolyte interface during (La 1-x Sr x) 1-δ Co 1-y Fe y O 3 cathode sintering10.1149/2.0141710jes ↗
17. Sr segregation in perovskite oxides: why it happens and how it exists10.1016/j.joule.2018.07.016 ↗
18. Ca-substituted, A-site deficient perovskite La0.2Sr 0.7TiO3 as a potential anode material for SOFCs10.1039/c3ta10844a ↗
19. Demonstration of high performance in a perovskite oxide supported solid oxide fuel cell based on la and Ca co-doped SrTiO310.1039/C6TA04074H ↗
20. Lanthanum doped strontium titanate - ceria anodes: deconvolution of impedance spectra and relationship with composition and microstructure10.1016/j.jpowsour.2018.03.024 ↗
21. Performances of planar solid oxide fuel cells with doped strontium titanate as anode materials10.1016/j.enconman.2006.11.005 ↗
22. Effect of Ba doping on performance of LST as anode in solid oxide fuel cells10.1016/j.jpowsour.2009.08.018 ↗
23. Enhancing CO2 electrolysis through synergistic control of non-stoichiometry and doping to tune cathode surface structures10.1038/ncomms14785 ↗
24. Electrical properties of Fe-doped SrTiO3 with B-site-deficient for SOFC anodes10.1016/j.ceramint.2019.07.167 ↗
25. Fabrication and electrochemical performance of zn-doped La 0.2 Sr 0.25 Ca 0.45 TiO 3 infiltrated with nickel-CGO, iron, and cobalt as an alternative anode material for solid oxide fuel cells10.3390/catal9030269 ↗
26. Synthesis and characterization of B-site doped La0.20Sr0.25Ca0.45TiO3 as SOFC anode materials10.1016/j.ijhydene.2014.08.083 ↗
27. Mobility of Sr in gadolinia doped ceria barrier layers prepared using spray pyrolysis
28. Enhancing electronic conductivity in strontium titanates through correlated A and B-site doping10.1021/cm103489r ↗
29. Effect of interaction between A-site deficient LST and ScSZ on electrochemical performance of SOFC10.1149/2.0131503jes ↗
30. Kinetic response of La0.6Sr0.4CoO3- lattice parameters to electric potential change in porous cathode at in situ solid oxide fuel cell conditions10.1149/2.0821503jes ↗
31. Placement of reference electrode, electrolyte thickness and three-electrode cell configuration in solid oxide fuel cells: a brief review and update on experimental approach10.1149/2.1331707jes ↗
32. Violation of the Franck-Condon principle due to recoil effects in high energy molecular core-level photoionization10.1103/PhysRevLett.95.133001 ↗
33. Vibrational structure and partial rates of resonant Auger decay of the [Formula Presented] core excitations in nitric oxide10.1103/PhysRevA.63.062702 ↗
34. Electrical properties of La-doped SrTiO3 (La: 0.1 to 2.0 at %) single crystals grown by xenon-arc image floating zone method10.1007/BF02396939 ↗
35. Studies on the reorganization of extended defects with increasing n in the perovskite-based La4Srn-4TinO3n+2 Series10.1002/adfm.200400362 ↗
36. Lattice strain-enhanced exsolution of nanoparticles in thin films
37. Nano-socketed nickel particles with enhanced coking resistance grown in situ by redox exsolution10.1038/ncomms9120 ↗
38. Step-change in high temperature steam electrolysis performance of perovskite oxide cathodes with exsolution of B-site dopants10.1039/C2EE22547F ↗
39. Cation size mismatch and charge interactions drive dopant segregation at the surfaces of manganite perovskites10.1021/ja3125349 ↗
40. Mobility of Sr in gadolinia doped ceria barrier layers prepared using spray pyrolysis, pulsed laser deposition and magnetron sputtering methods10.1149/2.0531602jes ↗
41. A strategy to mitigate grain boundary blocking in nanocrystalline zirconia10.1021/acs.jpcc.8b08877 ↗
42. Enhancing grain boundary ionic conductivity in mixed ionic-electronic conductors10.1038/ncomms7824 ↗
43. Oxidation of hydrogen on Ni/Yttria‐Stabilized zirconia cermet anodes10.1149/1.1838026 ↗
44. The effect of water content on the electrochemical impedance response and microstructure of Ni-CGO anodes for solid oxide fuel cells10.1016/j.jpowsour.2008.12.150 ↗
45. Mixed conductor anodes: Ni as electrocatalyst for hydrogen conversion10.1016/S0167-2738(02)00393-4 ↗
46. Reduction studies and evaluation of surface modified A-site deficient La-doped SrTiO3 as anode material for IT-SOFCs10.1039/b912305a ↗
47. Simultaneous operando characterization of crystallographic and electrochemical properties of Ni-Ce0.9Gd0.1O2-δ solid oxide fuel cell anode10.1149/2.0281813jes ↗