journal article·2021-03Open access

Performance hysteresis phenomena of anion exchange membrane fuel cells using an Fe–N–C cathode catalyst and an in-house-developed polymer electrolyte

Kanji Otsuji, Naoki Yokota, Donald A. Tryk, Katsuyoshi Kakinuma, Kenji Miyatake, Makoto Uchida

Abstract

We focus on the water management challenges and report on the improvements of cell performance for anion exchange membrane fuel cells (AEMFCs) using a non-PGM catalyst (Fe–N–C) for the cathode and an in-house-developed anion exchange ionomer (quaternized poly(arylene perfluoroalkylene), QPAF-4) for both the membrane and the catalyst layers (CLs) binder under practical gas flow rates conditions. The cell using the Fe–N–C cathode exhibited similar current-voltage (I–V) performance compared with those using Pt catalyst supported on carbon black. The cell using the Fe–N–C catalyst showed I–V hysteresis between increasing and decreasing current. The hysteresis decreased with increasing back-pressure. Based on the results of various I–V measurements, we conclude that the hysteresis is related to water supplied to the cathode using the Fe–N–C catalyst. Tafel slope component analysis revealed that a severe polarization occurred, amounting to slope octupling, with increasing current density, most likely due to the addition of water transport to the usual combination of gas and ionic transport. This severe polarization was alleviated after the cathode layer became sufficiently hydrated. We found from these results that water management is essential, due to the role of water as a reactant in the cathode reaction, for high-performance AEMFCs.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. “Fuel cells – fundamentals and applications10.1002/1615-6854(200105)1:1<5::AID-FUCE5>3.0.CO;2-G ↗
2. The chemical and structural nature of proton exchange membrane fuel cell properties10.1002/fuce.200400064 ↗
3. Anion exchange membranes for alkaline fuel cells: a review10.1016/j.memsci.2011.04.043 ↗
4. Anion-exchange membranes in electrochemical energy systems10.1039/C4EE01303D ↗
5. Unraveling mysteries of hydrogen electrooxidation in anion exchange membrane fuel cells10.1016/j.coelec.2018.11.013 ↗
6. Understanding how high-performance anion exchange membrane fuel cells were achieved: component, interfacial, and cell-level factors10.1016/j.coelec.2018.11.010 ↗
7. “Perspective—the next decade of AEMFCs: near-term targets to accelerate applied R&D10.1149/1945-7111/ab8c88 ↗
8. Polymeric materials as anion-exchange membranes for alkaline fuel cells10.1016/j.progpolymsci.2011.04.004 ↗
9. Anion exchange membranes: current status and moving forward10.1002/polb.23395 ↗
10. “Anion exchange membranes' evolution toward high hydroxide ion conductivity and alkaline resiliency10.1021/acsaem.8b00387 ↗
11. Designing advanced alkaline polymer electrolytes for fuel cell applications10.1021/ar200201x ↗
12. Achieving high-performance and 2000 h stability in anion exchange membrane fuel cells by manipulating ionomer properties and electrode optimization10.1002/aenm.202001986 ↗
13. Radiation-induced grafting of a butyl-spacer styrenic monomer onto ETFE: the synthesis of the most alkali stable radiation-grafted anion-exchange membrane to date10.1039/C7TA10222D ↗
14. Robust anion conductive polymers containing perfluoroalkylene and pendant ammonium groups for high performance fuel cells,10.1039/C7TA09409D ↗
15. High hydroxide ion conductivity with enhanced alkaline stability of partially fluorinated and quaternized aromatic copolymers as anion exchange membranes10.1021/acs.macromol.7b00401 ↗
16. Partially fluorinated copolymers containing pendant piperidinium head groups as anion exchange membranes for alkaline fuel cells10.1002/pola.29360 ↗
17. Effect of crosslinking on the properties of partially fluorinated anion exchange membranes10.1039/C9RA07775H ↗
18. “An efficient Ag–ionomer interface for hydroxide exchange membrane fuel cells10.1039/C2CC34862D ↗
19. Platinum group metal-free NiMo hydrogen oxidation catalysts: high performance and durability in alkaline exchange membrane fuel cells,10.1039/C7TA08718G ↗
20. “Nickel–copper supported on a carbon black hydrogen oxidation catalyst integrated into an anion-exchange membrane fuel cell10.1039/C8SE00261D ↗
21. Platinum and platinum group metal-free catalysts for anion exchange membrane fuel cells10.3390/en13030582 ↗
22. High-Performing PGM-free AEMFC cathodes from carbon-supported cobalt ferrite nanoparticles10.3390/catal9030264 ↗
23. “High-Loading composition-tolerant Co−Mn spinel oxides with performance beyond 1 W/cm2 in alkaline polymer electrolyte fuel cells10.1021/acsenergylett.9b00597 ↗
24. Synthesis and characterization of high performing Fe-N-C catalyst for oxygen reduction reaction (ORR) in Alkaline Exchange Membrane Fuel Cells10.1016/j.jpowsour.2017.08.036 ↗
25. Electrocatalytic oxygen reduction on transition metal macrocyclic complexes for anion exchange membrane fuel cell application10.1016/j.coelec.2018.04.001 ↗
26. “Water – a key parameter in the stability of anion exchange membrane fuel cells10.1016/j.coelec.2018.03.019 ↗
27. Alkaline-stable anion exchange membranes: a review of synthetic approaches10.1016/j.progpolymsci.2019.101177 ↗
28. A comprehensive review on water management strategies and developments in anion exchange membrane fuel cells10.1016/j.ijhydene.2020.05.026 ↗
29. Manipulating water in high-performance hydroxide exchange membrane fuel cells through asymmetric humidification and wetproofing10.1149/2.0131506jes ↗
30. Durability challenges of anion exchange membrane fuel cells10.1039/D0EE01133A ↗
31. Using operando techniques to understand and design high performance and stable alkaline membrane fuel cells10.1038/s41467-020-17370-7 ↗
32. The critical relation between chemical stability of cations and water in anion exchange membrane fuel cells environment10.1016/j.jpowsour.2017.08.026 ↗
33. Steady state and transient simulation of anion exchange membrane fuel cells10.1016/j.jpowsour.2017.07.012 ↗
34. Importance of balancing membrane and electrode water in anion exchange membrane fuel cells10.1016/j.jpowsour.2017.05.006 ↗
35. Beyond catalysis and membranes: visualizing and solving the challenge of electrode water accumulation and flooding in AEMFCs10.1039/C8EE00122G ↗
36. Review of cell performance in anion exchange membrane fuel cells10.1016/j.jpowsour.2017.07.117 ↗
37. Radiation grafted membranes for superior anion exchange polymer membrane fuel cells performance10.1016/j.ijhydene.2012.05.117 ↗
38. High performance aliphatic-heterocyclic benzyl-quaternary ammonium radiation-grafted anion-exchange membranes10.1039/C6EE01958G ↗
39. An optimised synthesis of high performance radiation-grafted anion-exchange membranes10.1039/C6GC02526A ↗
40. “Pt–Ru catalyzed hydrogen oxidation in alkaline media: oxophilic effect or electronic effect?10.1039/C4EE02564D ↗
41. Tafel slope component analysis of polymer electrolyte fuel cell cathode current-potential behavior10.1149/1.3643348 ↗
42. Mass transport in gas-diffusion electrodes: a diagnostic tool for fuel-cell cathodes10.1149/1.1838202 ↗