journal article·2021-01

Multi-physics simulation of transport phenomena in planar proton-conducting solid oxide fuel cell

Shahide Sayadian, Majid Ghassemi, Anthony James Robinson

Publisher page

Abstract

Abstract A thermo-fluid reacting numerical model for the multiphysics process in the planar proton-conducting solid oxide fuel cell (SOFC) is presented. A non-dimensional formulation of the governing equations is derived aimed to specify the dimensionless quantities that influence the power generation in SOFC, those being the Sherwood, Peclet, Reynolds, Darcy, Butler–Volmer, the first Damkohler, and the third Damkohler numbers. The model is implemented in an in-house computational code and shown to be in adequate agreement with experimental data from the literature to verify the efficacy of the model. A parametric study is subsequently conducted to understand the effect of porous electrodes parameters on the performance of SOFC. It is found that decreasing the Darcy and increasing Sherwood and Reynolds numbers results in a depletion of gas species in the electrochemically active area of the cell and thus a reduction in the electrical current generation. In addition, a high Peclet and the third Damkoler numbers increase SOFC operating temperature, leading to an improvement in the cell power density.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Proton conducting intermediate-temperature solid oxide fuel cells using new perovskite type cathodes10.1016/j.jpowsour.2014.03.013 ↗
2. Fabrication and evaluation of stable micro tubular solid oxide fuel cells with BZCY-BZY bi-layer proton conducting electrolytes10.1016/j.ijhydene.2014.09.051 ↗
3. Layer-structured LiNi0.8Co0.2O2: A new triple (H+/O2-/e-) conducting cathode for low temperature proton conducting solid oxide fuel cells10.1016/j.jpowsour.2015.12.015 ↗
4. A detailed analysis of thermal and chemical compatibility of cathode materials suitable for BaCe0.8Y0.2O3-d and BaZr0.8Y0.2O3-d proton electrolytes for solid oxide fuel cell application10.1016/j.ijhydene.2016.07.248 ↗
5. Micro-solid oxide fuel cell supported on a porous metallic Ni/stainless-steel bi-layer10.1016/j.jpowsour.2013.10.082 ↗
6. Low-temperature sintering of Ba(Zr,Y)O3-based proton conducting oxides using BaO–CuO eutectic flux as sintering aid10.1016/j.ceramint.2016.03.038 ↗
7. A functional micro-solid oxide fuel cell with a 10 nm-thick freestanding electrolyte10.1039/C7TA05245F ↗
8. Performance of proton-conducting ceramic-electrolyt fuel cell with BZCY40 electrolyte and BSCF5582 cathode10.1016/j.ceramint.2015.11.038 ↗
9. Three-dimensional CFD modeling of transport phenomena in multi-channel anode-supported planar SOFCs10.1016/j.ijheatmasstransfer.2015.01.097 ↗
10. Thermodynamic analysis of a fed solid oxide fuel cell based on a proton conductor10.1016/S0360-3199(01)00043-X ↗
11. Comparison of carbon formation boundary in different modes of solid oxide fuel cells fueled by methane10.1016/j.jpowsour.2004.10.009 ↗
12. Thermodynamic analysis of ammonia fed solid oxide fuel cells: comparison between proton-conducting electrolyte and oxygen ion conducting electrolyte10.1016/j.jpowsour.2008.05.022 ↗
13. Thermodynamic analysis of methane-fueled solid oxide fuel cells considering CO electrochemical oxidation10.1016/j.cjche.2014.06.018 ↗
14. Thermodynamic analysis of ammonia-fed solid oxide fuel cells10.1016/j.jpowsour.2011.10.142 ↗
15. Analysis of planar solid oxide fuel cells based on proton-conducting electrolyte10.1016/j.ssi.2010.09.002 ↗
16. Analysis of a proton-conducting SOFC with direct internal reforming10.1016/j.ces.2009.06.066 ↗
17. Investigation of a proton-conducting SOFC with internal auto thermal reforming of methane10.1016/j.cherd.2013.05.008 ↗
18. Numerical analysis of mass and heat transport in proton-conducting SOFCs with direct internal reforming10.1016/j.apenergy.2015.03.037 ↗
19. The effect of fuel utilization on heat and mass transfer within solid oxide fuel cells examined by three-dimensional numerical simulations10.1016/j.ijheatmasstransfer.2016.02.001 ↗
20. Three-dimensional multiphysics model of a planar solid oxide fuel cell using computational fluid dynamics approach10.1016/j.ijhydene.2018.08.212 ↗
21. The influence of interconnect ribs on the performance of planar solid oxide fuel cell and formulae for optimal rib sizes10.1016/j.jpowsour.2012.01.041 ↗
22. On the effect of gas channels-electrode interface area on SOFCs performance10.1016/j.ijhydene.2018.02.108 ↗
23. Batchelor · 2000
24. Effect of catalyst layer configuration on single chamber solid oxide fuel cell performance10.1016/j.applthermaleng.2016.01.128 ↗
25. Reid · 1987
26. Taylor · 1993
27. Fundamental models for fuel cell engineering10.1021/cr020718s ↗
28. Performance comparison of Fick’s, dusty-gas and Stefane–Maxwell models to predict the concentration overpotential of a SOFC anode10.1016/S0378-7753(02)00724-3 ↗
29. Bird · 2002
30. Kee · 2003
31. Investigation of the electrochemical active thickness of solid oxide fuel cell anode10.1016/j.ijhydene.2014.06.108 ↗
32. A comprehensive micro-scale model for transport and reaction in intermediate temperature solid oxide fuel cells10.1016/j.electacta.2005.09.041 ↗
33. Combined micro-scale and macro-scale modeling of the composite electrode of a solid oxide fuel cell10.1016/j.jpowsour.2010.04.065 ↗
34. Modeling of SOFC running on partially pre-reformed gas mixture10.1016/j.ijhydene.2011.10.042 ↗
35. SOFC modeling considering electrochemical reactions at the active three phase boundaries10.1016/j.ijheatmasstransfer.2011.10.032 ↗
36. Thermal conductivity of gas mixtures10.1021/ie50488a017 ↗
37. The effect of electrolyte type on performance of solid oxide fuel cells running on hydrocarbon fuels10.1016/j.ijhydene.2012.12.055 ↗
38. Effect of humidification at anode and cathode in proton-conducting SOFCs10.1016/S0167-2738(03)00222-4 ↗
39. Analysis of a proton-conducting SOFC with direct internal reforming10.1016/j.ces.2009.06.066 ↗