journal article·2020-02

Thin and methanol-resistant reinforced composite membrane based on semi-crystalline poly (ether ether ketone) for fuel cell applications

Chongyang Zhang, Xigui Yue, Yanchao Yang, Nan Lu, Shuling Zhang, Guibin Wang

Publisher page

Abstract

Abstract Nowadays, demands for the utilization of thin membranes in the next generation of direct methanol fuel cells become urgent to acquire the high power density. However, the fuel crossover coefficient is inversely proportional to the thickness of membranes which easily causes the reduction of the energy density. Hence, we propose a thin reinforced pore-filling composite membrane that is fabricated from a highly sulfonated poly (ether ether ketone) electrolyte and a high mechanical strength semi-crystalline poly (ether ether ketone) porous matrix. The semi-crystalline poly (ether ether ketone) derived from a soluble precursor of PEEK-1,3-dioxolane is first reported to be used for preparing the porous membrane. Uniform pore structures of the porous matrix are obtained by a water induced phase inversion method. As-prepared porous PEEK shows high toughness with an elongation at break of 8.2%. The reinforced composite membrane (only 20 μm) demonstrates superior methanol tolerance (3.2 × 10−7 cm2 s−1) and good proton conductivity due to the packed-acid structure. In addition, the membrane electrode assembly indicates a preferable behavior in single cell performance, with an open circuit voltage of 0.53 V and a peak power density of 34.6 mW/cm2.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Conducting polymers and applications · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Novel slightly reduced graphene oxide based proton exchange membrane with constructed long-range ionic nanochannels via self-assembling of nafion10.1021/acsami.7b06117 ↗
2. Sulfonated holey graphene oxide (SHGO) filled sulfonated poly(ether ether ketone) membrane: the role of holes in the SHGO in improving its performance as proton exchange membrane for direct methanol fuel cells10.1021/acsami.7b00198 ↗
3. Novel composite proton exchange membrane with connected long-range ionic nanochannels constructed via exfoliated nafion-boron nitride nanocomposite10.1021/acsami.7b00858 ↗
4. Proton exchange membrane nanocomposites
5. Review of advanced materials for proton exchange membrane fuel cells10.1021/ef501977k ↗
6. A novel porous sulfonated poly(ether ether ketone)-based multi-layer composite membrane for proton exchange membrane fuel cell application10.1039/C7SE00240H ↗
7. Composite carbon nanotube microsphere coatings for use as electrode supports10.1002/adfm.201803713 ↗
8. Tunable nanochannels along graphene oxide/polymer core-shell nanosheets to enhance proton conductivity10.1002/adfm.201503229 ↗
9. Functionalized mesoporous structured inorganic materials as high temperature proton exchange membranes for fuel cells10.1039/C4TA00121D ↗
10. Highly fluorinated comb-shaped copolymers as proton exchange membranes (PEMs): improving PEM properties through rational design10.1002/adfm.200500763 ↗
11. Highly proton conducting polyelectrolyte membranes with unusual water swelling behavior based on triptycene-containing poly(arylene ether sulfone) multiblock copolymers10.1021/acsami.7b13542 ↗
12. Sulfonated poly(arylene ether phosphine oxide ketone) block copolymers as oxidatively stable proton conductive membranes10.1021/am401625j ↗
13. Effects of block length and membrane processing conditions on the morphology and properties of perfluorosulfonated poly(arylene ether sulfone) multiblock copolymer membranes for PEMFC10.1021/acsami.5b01835 ↗
14. Pore-filling type polymer electrolyte membranes for a direct methanol fuel cell10.1016/S0376-7388(02)00579-3 ↗
15. An extremely low methanol crossover and highly durable aromatic pore-filling electrolyte membrane for direct methanol fuel cells10.1002/adma.200601086 ↗
16. Thin pore-filling membrane with highly packed-acid structure for high temperature and low humidity operating polymer electrolyte fuel cells10.1016/j.jpowsour.2018.05.013 ↗
17. The proton conduction mechanism in a material consisting of packed acids10.1039/C4SC00952E ↗
18. A durable anion conducting membrane with packed anion-exchange sites and an aromatic backbone for solid-state alkaline fuel cells10.1039/C5PY01058F ↗
19. Preparation and properties of pore-filling membranes based on sulfonated copolyimides and porous polyimide matrix10.1016/j.polymer.2012.05.049 ↗
20. Development of a crosslinked pore-filling membrane with an extremely low swelling ratio and methanol crossover for direct methanol fuel cells10.1016/j.electacta.2017.02.097 ↗
21. Preparation of radiochemically pore-filled polymer electrolyte membranes for direct methanol fuel cells10.1016/j.jpowsour.2005.05.053 ↗
22. Multifunctional composite membrane based on a highly porous polyimide matrix for direct methanol fuel cells10.1016/j.jpowsour.2009.08.049 ↗
23. Characterisation of PAMPS–PSS pore-filling membrane for direct methanol fuel cell10.1016/j.memsci.2013.06.032 ↗
24. Pore-filling polymer electrolyte membrane based on poly (arylene ether ketone) for enhanced dimensional stability and reduced methanol permeability10.1016/j.memsci.2017.07.060 ↗
25. Physical and chemical modification routes leading to improved mechanical properties of perfluorosulfonic acid membranes for PEM fuel cells10.1016/j.jpowsour.2012.12.121 ↗
26. Ultra-thin reinforced ionomer membranes to meet next generation fuel cell targets
27. Electrospun nanofibre composite polymer electrolyte fuel cell and electrolysis membranes10.1016/j.nanoen.2016.06.027 ↗
28. Molecular dynamics simulations of modified PEEK polymeric membrane for fuel cell application10.1016/j.ijhydene.2015.12.220 ↗
29. Effect of poly(ether ether ketone) and allyl compounds on microstructure and properties of bismaleimide10.1007/s10854-018-0368-3 ↗
30. Long-spacer-chain imidazolium functionalized poly(ether ether ketone) as hydroxide exchange membrane for fuel cell10.1016/j.ijhydene.2016.06.030 ↗
31. Synthesis and characterization of PEEK containing imidazole for anion exchange membrane fuel cell10.1016/j.ijhydene.2017.02.199 ↗
32. Free volume enhanced proton exchange membranes from sulfonated triptycene poly(ether ketone)10.1016/j.memsci.2017.11.041 ↗
33. Reversible, nondegradative conversion of crystalline aromatic poly(ether ketone)s into organo-soluble poly(ether dithioketal)s10.1021/ma8023377 ↗
34. Exchange reactions of poly(arylene ether ketone) dithioketals with aliphatic diols: formation and deprotection of poly(arylene ether ketal)s10.1021/acs.macromol.7b02203 ↗
35. Design of scaffolds for blood vessel tissue engineering using a multi-layering electrospinning technique10.1016/j.actbio.2005.06.006 ↗
36. Graphitic carbon nitride nanosheets/sulfonated poly(ether ether ketone) nanocomposite membrane for direct methanol fuel cell application10.1016/j.memsci.2016.02.004 ↗
37. Methanol transport through nafion membranes electro-osmotic drag effects on potential step measurements10.1149/1.1393219 ↗
38. Studies on Nano composites of SPEEK/ethylene glycol/cellulose nanocrystals as promising proton exchange membranes10.1016/j.electacta.2018.10.029 ↗
39. Enhancement of hydroxide conductivity by grafting flexible pendant imidazolium groups into poly(arylene ether sulfone) as anion exchange membranes10.1039/C5TA04257G ↗
40. Enhanced proton conductivity of multiblock poly(phenylene ether ketone)s via pendant sulfoalkoxyl side chains with excellent H2/air fuel cell performance10.1039/C5TA09320A ↗
41. Poly(2,5-benzimidazole)-Grafted graphene oxide as an effective proton conductor for construction of nanocomposite proton exchange membrane10.1021/acsami.7b07777 ↗
42. A durable alternative for proton-exchange membranes: sulfonated poly(benzoxazole thioether Sulfone)s10.1002/aenm.201000062 ↗
43. Sulfonated polyimide and PVDF based blend proton exchange membranes for fuel cell applications10.1039/C4TA04910A ↗
44. Sulfonated poly(arylene ether sulfone)s with phosphine oxide moieties: a promising material for proton exchange membranes10.1021/am1000739 ↗
45. Surface-fluorinated proton-exchange membrane with high electrochemical durability for direct methanol fuel cells10.1021/am900067q ↗
46. An acid-stable hexaphosphate ester based metal–organic framework and its polymer composite as proton exchange membrane10.1039/C7TA00169J ↗
47. Enhanced proton conductivity of nafion hybrid membrane under different humidities by incorporating metal-organic frameworks with high phytic acid loading10.1021/am502236v ↗
48. Membrane architecture with ion-conducting channels through swift heavy ion induced graft copolymerization10.1039/C7TA07323B ↗
49. Nafion-functionalized electrospun poly(vinylidene fluoride) (PVDF) nanofibers for high performance proton exchange membranes in fuel cells10.1039/C3TA14264G ↗
50. Enhancing water retention and low-humidity proton conductivity of sulfonated poly(ether ether ketone) composite membrane enabled by the polymer-microcapsules with controllable hydrophilicitye-hydrophobicity10.1016/j.jpowsour.2013.10.017 ↗
51. SGO/SPES-based highly conducting polymer electrolyte membranes for fuel cell application10.1021/am5000504 ↗
52. Proton conducting nafion-sulfonated graphene hybrid membranes for direct methanol fuel cells with reduced methanol crossover10.1021/acs.energyfuels.5b02194 ↗
53. Nafion-montmorillonite nanocomposite membrane for the effective reduction of fuel crossover10.1021/ie901600a ↗