journal article·2020-02

Analysis of the regeneration behavior of high temperature polymer electrolyte membrane fuel cells after hydrogen starvation

Khrystyna Yezerska, Fang Liu, Anastasia Dushina, Oleg Sergeev, Peter Wagner, Alexander Dyck, Michael Wark

Publisher page

Abstract

Abstract Two high temperature polymer exchange membrane fuel cells (HT-PEM FCs) were operated under repeated starvation/regeneration steps for 550 min (DPS-1) and 12 days (DPS-2). Concerning the investigation of the irreversible degradation under fuel (H2) starvation the focus was put on the electrochemical characteristics during regeneration, since during this step the system operates under normal conditions. Electrochemical impedance spectroscopy (EIS) and distribution of relaxation times (DRT) analysis were used as electrochemical characterization methods. DRT analysis of selected impedance spectra during regeneration steps for the first seven days revealed an intensity increase of the charge transfer kinetics of the cathode (ca. 10 Hz) and the anode (ca. 100 Hz). From day 3 on, an additional peak at 300–800 Hz appeared likely pointing to the formation of surface oxides at the anode side. The EIS and DRT results were verified with Focused Ion Beam-Scanning Electron Microscopy (FIB-SEM), Microcomputed Tomography (μ-CT) and Transmission Electron Microscopy (TEM). While TEM indicated advanced Pt particle agglomeration pointing to carbon corrosion, μ-CT measurements showed an increase of void volume fraction and a decrease of the tortuosity value. The combined results show that the anode gas outlet region of the FC is more degraded than the inlet region.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Electrochemical impedance spectroscopy (EIS) characterization of reformate-operated high temperature PEM fuel cell stack10.22606/ijper.2017.11003 ↗
2. Fuel electrode carbon corrosion in high temperature polymer electrolyte fuel cells—crucial or irrelevant?10.1002/ente.201500217 ↗
3. Fault characterization of a proton exchange membrane fuel cell stack
4. Carbon corrosion in PEM fuel cells and the development of accelerated stress tests10.1149/2.0061806jes ↗
5. Thinning of cathode catalyst layer in polymer electrolyte fuel cells due to foreign cation contamination10.1149/2.0021806jes ↗
6. Anode aging during PEMFC start-up and shut-down: H2-air fronts vs voltage cycles10.1149/2.0611816jes ↗
7. Characterization methodology for anode starvation in HT-PEM fuel cells10.1016/j.ijhydene.2019.05.114 ↗
8. On the impact of water activity on reversal tolerant fuel cell anode performance and durability10.1016/j.jpowsour.2016.07.002 ↗
9. Analysis of carbon corrosion in anode under fuel starvation using on-line mass spectrometry in polymer electrolyte membrane fuel cells10.1149/2.0731714jes ↗
10. Analysis of electrocatalyst degradation in PEMFC caused by cell reversal during fuel starvation10.1016/j.jpowsour.2003.12.035 ↗
11. Analysis of accelerated degradation of a HT-PEM fuel cell caused by cell reversal in fuel starvation condition10.1016/j.ijhydene.2014.12.082 ↗
12. Carbon support oxidation in PEM fuel cell cathodes10.1016/j.jpowsour.2007.08.053 ↗
13. Scientific aspects of polymer electrolyte fuel cell durability and degradation10.1021/cr050182l ↗
14. Surface oxidation of carbon supports due to potential cycling under PEM fuel cell conditions10.1016/j.electacta.2010.03.056 ↗
15. Damage to the cathode catalyst of a PEM fuel cell caused by localized fuel starvation10.1149/1.2167930 ↗
16. Catalysis for low temperature fuel cells: Part II: the anode challenges10.1595/003214002X463117135 ↗
17. PEM fuel cell cathode carbon corrosion due to the formation of air/fuel boundary at the anode10.1016/j.jpowsour.2005.10.059 ↗
18. Predictive virtual modelling framework for performance and platinum degradation modelling of high temperature PEM fuel cells10.1016/j.egypro.2019.01.426 ↗
19. Advanced impedance study of polymer electrolyte membrane single cells by means of distribution of relaxation times10.1016/j.jpowsour.2018.09.004 ↗
20. Generalized distribution of relaxation times analysis for the characterization of impedance spectra10.3390/batteries5030053 ↗
21. Electrochemical characterization of a polybenzimidazole-based high temperature proton exchange membrane unit cell10.1016/j.jpowsour.2009.02.025 ↗
22. Distribution of relaxation times analysis of high-temperature PEM fuel cell impedance spectra10.1016/j.electacta.2017.02.011 ↗
23. Identification of polarization lossesin high temperature PEM fuel cellsby distribution of relaxation times analysis
24. Validation of a physically-based solid oxide fuel cell anode model combining 3D tomography and impedance spectroscopy10.1016/j.ijhydene.2016.09.100 ↗
25. TauFactor: an open-source application for calculating tortuosity factors from tomographic data10.1016/j.softx.2016.09.002 ↗
26. Exploring electrochemical devices using X-ray microscopy: 3D microstructure of batteries and fuel cells
27. The application of machine learning to the problem of classifying voxels in X-ray microtomographic scans of mineralogical samples
28. High temperature (HT) polymer electrolyte membrane fuel cells (PEMFC) – a review10.1016/j.jpowsour.2012.11.126 ↗
29. Permeability anisotropy due to consolidation of compressible porous media10.1007/s11242-006-9048-5 ↗
30. Evaluation of HT-PEM MEAs: load cycling versus start/stop cycling
31. Tortuosity-porosity relation in porous media flow10.1103/PhysRevE.78.026306 ↗
32. Critical review of the impact of tortuosity on diffusion10.1016/j.ces.2007.03.041 ↗
33. A rapid break-in procedure for PBI fuel cells10.1016/j.ijhydene.2009.05.003 ↗
34. Modelling of a high-temperature polymer electrolyte membrane fuel cell integrated with a methanol steam reformer cell10.1016/j.apenergy.2017.05.120 ↗
35. A comprehensive review of PBI-based high temperature PEM fuel cells10.1016/j.ijhydene.2016.09.024 ↗
36. A linear Kronig‐Kramers transform test for immittance data validation10.1149/1.2044210 ↗
37. A method for improving the robustness of linear Kramers-Kronig validity tests10.1016/j.electacta.2014.01.034 ↗
38. Approximability of impedance spectra by RC elements and implications for impedance analysis10.1016/j.elecom.2015.05.018 ↗
39. Deconvolution of electrochemical impedance spectra for the identification of electrode reaction mechanisms in solid oxide fuel cells10.1023/A:1020599525160 ↗
40. Evaluation of electrochemical impedance spectra by the distribution of relaxation times10.2109/jcersj2.16267 ↗
41. Rapid and flash tests: indicator for quality of HT-PEM fuel cells batches?10.1002/fuce.201700177 ↗
42. Correlative tomography at the cathode/electrolyte interfaces of solid oxide fuel cells10.1016/j.jpowsour.2017.06.008 ↗
43. Materials analysis and focused ion beam nanofabrication of topological insulator Bi(2)Se(3)10.1038/s41598-017-13863-6 ↗
44. Durability of electrocatalysts for ORR: Pt on nanocomposite of reduced graphene oxide with FTO versus Pt/C10.1149/2.0361806jes ↗
45. Fiji: an open-source platform for biological-image analysis10.1038/nmeth.2019 ↗
46. Statistical region merging10.1109/TPAMI.2004.110 ↗
47. Trainable Weka Segmentation: a machine learning tool for microscopy pixel classification10.1093/bioinformatics/btx180 ↗
48. Arganda-Carreras · 2014
49. The fractal nature of the three-phase boundary: a heuristic approach to the degradation of nanostructured solid oxide fuel cell anodes10.1016/j.nanoen.2017.06.028 ↗
50. A carbon corrosion model to evaluate the effect of steady state and transient operation of a polymer electrolyte membrane fuel cell10.1149/2.036309jes ↗
51. Investigation of thermal and electrochemical degradation of fuel cell catalysts10.1016/j.jpowsour.2006.03.033 ↗
52. Bengen · 2018
53. Three-dimensional morphology of the interface between micro porous layer and catalyst layer in a polymer electrolyte membrane fuel cell10.1039/C6RA16560E ↗
54. Breaking through the cracks: on the mechanism of phosphoric acid migration in high temperature polymer electrolyte fuel cells10.1149/2.0501814jes ↗
55. A model for a crack or a delaminated region in a PEM fuel cell anode: analytical solutions10.1016/j.electacta.2015.05.189 ↗
56. Evaluation of structural changes of HT-PEFC electrodes from in-situ synchrotron X-ray radiographs10.1016/j.ijhydene.2014.04.059 ↗
57. Impact of accelerated stress tests on high temperature PEMFC degradation10.1002/fuce.201500160 ↗
58. Long-term durability of HT-PEM fuel cells based on thermally cross-linked polybenzimidazole10.1016/j.jpowsour.2016.12.075 ↗
59. Probing degradation by IL-TEM: the influence of stress test conditions on the degradation mechanism10.1149/2.078306jes ↗
60. Imaging ionomer in fuel cell catalyst layers with synchrotron nano transmission x-ray microscopy10.1016/j.ssi.2019.02.017 ↗
61. Change of an anode's microstructure morphology during the fuel starvation of an anode-supported solid oxide fuel cell10.1016/j.ijhydene.2015.03.143 ↗