journal article·2020-02

Real-time peak power prediction for zinc nickel single flow batteries

Shawn Li, Kang Li, Evan Xiao, Jianhua Zhang, Min Zheng

Publisher page

Abstract

The Zinc Nickel single flow batteries (ZNBs) have gained increasing attention recently. Due to the high variability of the intermittent renewable energy sources, load demands, and the operating conditions, the state of charge (SoC) is not an ideal indicator to gauge the potential cycling abilities. Alternatively, the peak power is more closely related to the instantaneous power acceptance and deliverance, and its real-time estimation plays a key role in grid-based energy storage systems. However, little has been done to comprehensively examine the peak power delivery capability of Zinc Nickel single flow batteries (ZNBs). To fill this gap, the recursive least square (RLS) method is first employed to achieve online battery model identification and represent the impact of varying working conditions. The state of charge (SoC) is then estimated by the extended Kalman filter (EKF). With these preliminaries, a novel peak power prediction method is developed based on the rolling prediction horizon. Four indices are proposed to capture the characteristics of the peak power capability over length-varying prediction windows. Finally, the consequent impacts of the electrode material and applied flow rate on peak power deliverability are analysed qualitatively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced battery technologies research · Advanced Battery Technologies Research · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Progress in redox flow batteries, remaining challenges and their applications in energy storage10.1039/c2ra21342g ↗
2. Energy-storage technologies and electricity generation10.1016/j.enpol.2008.09.037 ↗
3. Redox flow batteries: a review10.1007/s10800-011-0348-2 ↗
4. Progress in flow battery research and development10.1149/1.3599565 ↗
5. Redox flow cells for energy conversion10.1016/j.jpowsour.2006.02.095 ↗
6. Nickel foam and carbon felt applications for sodium polysulfide/bromine redox flow battery electrodes10.1016/j.electacta.2005.06.008 ↗
7. Development of vanadium redox flow battery for electricity storage10.1049/pe:19990305 ↗
8. A novel single flow zinc–bromine battery with improved energy density10.1016/j.jpowsour.2013.01.193 ↗
9. A novel flow battery: a lead acid battery based on an electrolyte with soluble lead (ii) part i. preliminary studies10.1039/b401115e ↗
10. Preliminary study of single flow zinc–nickel battery10.1016/j.elecom.2007.08.016 ↗
11. Performance gains in single flow zinc–nickel batteries through novel cell configuration10.1016/j.electacta.2013.05.024 ↗
12. Study of zinc electrodes for single flow zinc/nickel battery application10.1016/j.jpowsour.2007.12.088 ↗
13. Zinc morphology in zinc–nickel flow assisted batteries and impact on performance10.1016/j.jpowsour.2010.09.065 ↗
14. Gas evolution in a flow-assisted zinc–nickel oxide battery10.1016/j.jpowsour.2011.03.025 ↗
15. Rechargeable nickel–3d zinc batteries: an energy-dense, safer alternative to lithium-ion10.1126/science.aak9991 ↗
16. Adaptive on-line prediction of the available power of lithium-ion batteries10.1016/j.jpowsour.2013.05.111 ↗
17. A highly accurate predictive-adaptive method for lithium-ion battery remaining discharge energy prediction in electric vehicle applications10.1016/j.apenergy.2015.03.110 ↗
18. A double-scale, particle-filtering, energy state prediction algorithm for lithium-ion batteries10.1109/TIE.2017.2733475 ↗
19. The co-estimation of state of charge, state of health, and state of function for lithium-ion batteries in electric vehicles10.1109/TVT.2017.2751613 ↗
20. Online peak power prediction based on a parameter and state estimator for lithium-ion batteries in electric vehicles10.1016/j.energy.2014.02.009 ↗
21. A field validated model of a vanadium redox flow battery for microgrids10.1109/TSG.2014.2310212 ↗
22. Zinc-nickel single flow batteries with improved cycling stability by eliminating zinc accumulation on the negative electrode10.1016/j.electacta.2014.08.090 ↗
23. A high power density single flow zinc–nickel battery with three-dimensional porous negative electrode10.1016/j.jpowsour.2013.04.121 ↗
24. A novel rbf neural model for single flow zinc nickel batteries
25. U. ABC, Us Abc Electric Vehicle Battery Test Procedures Manual, Revision 2, Principal Author: Gary Hunt, Idaho National Engineering Laboratory (INEL), US Department of Energy Idaho Field Office, DOE/ID-10479, Rev 2.
26. Temperature dependent power capability estimation of lithium-ion batteries for hybrid electric vehicles10.1016/j.energy.2016.06.010 ↗
27. High-performance battery-pack power estimation using a dynamic cell model10.1109/TVT.2004.832408 ↗
28. Lithium-ion battery instantaneous available power prediction using surface lithium concentration of solid particles in a simplified electrochemical model10.1109/TPEL.2018.2791965 ↗
29. Overview of lithium-ion battery modeling methods for state-of-charge estimation in electrical vehicles10.3390/app8050659 ↗
30. A comparative study of equivalent circuit models for li-ion batteries10.1016/j.jpowsour.2011.10.013 ↗
31. An adaptive model for vanadium redox flow battery and its application for online peak power estimation10.1016/j.jpowsour.2017.01.102 ↗
32. Dynamic electro-thermal modeling of all-vanadium redox flow battery with forced cooling strategies10.1016/j.apenergy.2014.08.062 ↗
33. A comprehensive equivalent circuit model of all-vanadium redox flow battery for power system analysis10.1016/j.jpowsour.2015.04.169 ↗
34. A novel temperature-compensated model for power li-ion batteries with dual-particle-filter state of charge estimation10.1016/j.apenergy.2014.02.072 ↗
35. Comparison study on the battery models used for the energy management of batteries in electric vehicles10.1016/j.enconman.2012.04.014 ↗
36. Application-specific parameterization of reduced order equivalent circuit battery models for improved accuracy at dynamic load10.1016/j.measurement.2013.07.025 ↗
37. A multi-timescale estimator for battery state of charge and capacity dual estimation based on an online identified model10.1016/j.apenergy.2017.02.016 ↗
38. A novel method to obtain the open circuit voltage for the state of charge of lithium ion batteries in electric vehicles by using h infinity filter10.1016/j.apenergy.2017.05.136 ↗
39. Adaptive estimation of state of charge and capacity with online identified battery model for vanadium redox flow battery10.1016/j.jpowsour.2016.09.123 ↗
40. Extended kalman filtering for battery management systems of lipb-based hev battery packs: Part 3. state and parameter estimation10.1016/j.jpowsour.2004.02.033 ↗
41. Generalized predictive control applied in waste heat recovery power plants10.1016/j.apenergy.2012.07.038 ↗
42. Fast constrained lqr based on mpc with linear decomposition10.1109/TAC.2015.2495231 ↗
43. A novel flowrate control method for single flow zinc/nickel battery