Pre-blended conductive agent to effectively improve the storage properties of LiNi0.6Co0.2Mn0.2O2 cathode materials
Source abstract
Abstract
Abstract Nowadays, the high-nickel ternary cathode materials attract more and more attention because of their high capacity. However, compared with other cathode materials, the disadvantage of high-nickel ternary cathode materials in storage performance is very obvious. The obvious impurities on the surface of high-nickel ternary materials are generated after storage for a period of time, and its electrochemical performance produce a cliff-like decline. In this work, we use the pre-blending of conductive agent to simply and effectively improve the storage performance of LiNi0.6Co0.2Mn0.2O2 cathode materials under high temperature and high humidity conditions. Fine particles of conductive agent can be well filled in the gap between the primary particles of the material, suppressing the sites where impurities are most easily formed during storage. Compared with the pristine materials, when stored for the same time, the impurities generated on the surface of modified materials are significantly fewer, the increase of weight is smaller, and more excellent electrochemical performance is exhibited. It can be seen from the results that the pre-blending of the conductive agent can greatly improve the storage performance of the high-nickel ternary cathode materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Structural changes and thermal stability of charged LiNixMnyCozO(2) cathode materials studied by combined in situ time-resolved XRD and mass spectroscopy10.1021/am506712c ↗
2. Correlation of oxygen non-stoichiometry to the instabilities and electrochemical performance of LiNi0.8Co0.1Mn0.1O2 utilized in lithium ion battery10.1016/j.jpowsour.2015.02.095 ↗
3. Nickel-Rich and lithium-rich layered oxide cathodes: progress and perspectives10.1002/aenm.201501010 ↗
4. Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x = 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries10.1016/j.jpowsour.2013.01.063 ↗
5. A systematic study on the reactivity of different grades of charged Li[NixMnyCoz]O2 with electrolyte at elevated temperatures using accelerating rate calorimetry10.1016/j.jpowsour.2016.07.039 ↗
6. Studies on storage characteristics of LiNi0.4Co0.2Mn0.4O2 as cathode materials in lithium-ion batteries10.1149/1.2711068 ↗
7. Effects of CO2 in air on Li deintercalation from LiNi1−x−yCoxAlyO210.1016/S0378-7753(99)00216-5 ↗
8. Investigation and improvement on the storage property of LiNi0.8Co0.2O2 as a cathode material for lithium-ion batteries10.1016/j.jpowsour.2006.07.028 ↗
9. Enhanced storage property of LiNi0.8Co0.15Al0.05O2 coated with LiCoO210.1016/j.jpowsour.2012.12.065 ↗
10. Li2CO3 in LiNi0.8Co0.15Al0.05O2 cathodes and its effects on capacity and power10.1016/j.jpowsour.2004.02.030 ↗
11. Effect of residual lithium compounds on layer Ni-rich Li[Ni0.7Mn0.3]O210.1149/2.042406jes ↗
12. Effect of CO2 on layered Li1+zNi1−x−yCoxMyO2 (M=Al, Mn) cathode materials for lithium ion batteries10.1016/j.jpowsour.2007.01.013 ↗
13. Origin of deterioration for LiNiO2 cathode material during storage in air10.1149/1.1738471 ↗
14. The high-temperature and high-humidity storage behaviors and electrochemical degradation mechanism of LiNi0.6Co0.2Mn0.2O2 cathode material for lithium ion batteries10.1016/j.jpowsour.2017.07.087 ↗
15. J. Storage Characteristics of LiNi[sub 0.8]Co[sub 0.1+x]Mn[sub 0.1−x]O[sub 2] (x=0, 0.03, and 0.06) Cathode Materials for Lithium Batteries10.1149/1.2830946 ↗
16. Bulk and surface analyses of ageing of a 5V-NCM positive electrode material for lithium-ion batteries10.1039/c3ta13112b ↗
17. Electrochemical and in situ X‐ray diffraction studies of lithium intercalation in LixCoO210.1149/1.2221184 ↗
18. In situ x-ray diffraction and electrochemical studies of Li1−xNiO210.1016/0167-2738(93)90317-V ↗
19. In situ X-ray diffraction and X-ray absorption studies of high-rate lithium-ion batteries10.1016/S0378-7753(00)00493-6 ↗
20. Crystal structure changes of LiMn0.5Ni0.5O2 cathode materials during charge and discharge studied by synchrotron based in situ XRD10.1016/S1388-2481(02)00406-X ↗
21. Understanding structural changes in NMC Li-ion cells by in situ neutron diffraction10.1016/j.jpowsour.2014.01.010 ↗
22. Electrochemical degradation mechanism and thermal behaviors of the stored LiNi0.5Co0.2Mn0.3O2 cathode materials10.1021/acsami.8b07873 ↗
23. Overcoming the chemical instability on exposure to air of Ni-rich layered oxide cathodes by coating with spinel LiMn1.9Al0.1O410.1039/C6TA01061J ↗
24. Synthesis and characterization of LiCoO2-coated LiNi0.8Co0.15Al0.05O2 cathode materials10.1016/j.matlet.2012.05.100 ↗
25. Effects of Li2MnO3 coating on the high-voltage electrochemical performance and stability of Ni-rich layer cathode materials for lithium-ion batteries10.1039/C5RA26897D ↗
26. Investigation and improvement on the electrochemical performance and storage characteristics of LiNiO 2 -based materials for lithium ion battery10.1016/j.electacta.2016.01.142 ↗
27. An electrochemical impedance spectroscopic study of the electronic and ionic transport properties of spinel LiMn2O410.1021/jp9109157 ↗
28. Impedance studies on the capacity fading mechanism of Li(Ni0.5Co0.2Mn0.3)O2Cathode with high-voltage and high-temperature10.1149/2.0851514jes ↗
29. The study of surface phenomena related to electrochemical lithium intercalation into Lix MO y host materials (M = Ni, Mn)10.1149/1.1393357 ↗
30. Performance of layered Li(Ni1/3Co1/3Mn1/3)O2 as cathode for Li-ion batteries10.1016/S0013-4686(02)00593-5 ↗
31. Depolarized and fully active cathode based on Li(Ni0.5Co0.2Mn0.3)O2 embedded in carbon nanotube network for advanced batteries10.1021/nl5018139 ↗
32. Aging of LiNi1/3Mn1/3Co1/3O2 cathode material upon exposure to H2O10.1016/j.jpowsour.2011.02.009 ↗
33. Vibrational spectroscopy and electrochemical properties of LiNi0.7Co0.3O2 cathode material for rechargeable lithium batteries10.1007/BF02375613 ↗
34. Studies of LiNi0.6Co0.4O2 cathode material prepared by the citric acid-assisted sol-gel method for lithium batteries10.1023/A:1008765030990 ↗
35. Stability of Li2CO3 in cathode of lithium ion battery and its influence on electrochemical performance10.1039/C6RA00648E ↗
36. Understanding the degradation mechanisms of LiNi0.5Co0.2Mn0.3O2 cathode material in lithium ion batteries10.1002/aenm.201300787 ↗