journal article·2019-10Open access

Design guidelines for the manufacturing of the electrode-electrolyte interface of solid oxide fuel cells

Chih-Che Chueh, Antonio Bertei, Cristiano Nicolella

Abstract

Abstract The advent of 3D printing has ushered in the scope for designing microstructures for solid oxide fuel cells (SOFCs) with enhanced power density and lifetime. Additive manufacturing can introduce structural modifications such as dense electrolyte pillars embedded within the porous electrode domain to facilitate ion transport. This study presents comprehensive guidelines to the design of electrolyte pillars to minimize the polarization resistance and increase the electrode robustness by means of a numerical model comprising electrochemical phenomena and structural mechanics. Numerical results show that the introduction of rectangular and trapezoidal pillars can reduce electrode polarization provided that an electrode thickness larger than the active thickness is used. Lateral fins or any protrusions sticking out the pillar hinder gas transport and should be avoided. Mechanical stress, up to twice the external compressive load, accumulates at the pillar/electrolyte junction, indicating that sharp corners must be smoothed during pillar manufacturing. Additional considerations regarding the fabrication accuracy and minimum resolution are addressed too. Although a simple and general recipe for the optimal electrode fabrication is not possible, the rationale behind the strategies for the best pillar design are presented and critically discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Fuel Cells and Related Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. Minh · 1995
2. Rational SOFC material design: new advances and tools
3. Enhanced sulfur and coking tolerance of a mixed ion conductor for SOFCs: BaZr0.1Ce0.7Y0.2-xYbxO3-10.1126/science.1174811 ↗
4. Promotion of water-mediated carbon removal by nanostructured barium oxide/nickel interfaces in solid oxide fuel cells10.1038/ncomms1359 ↗
5. Dependence of polarization in anode-supported solid oxide fuel cells on various cell parameters10.1016/j.jpowsour.2004.08.057 ↗
6. Optimisation of processing and microstructural parameters of LSM cathodes to improve the electrochemical performance of anode-supported SOFCs10.1016/j.jpowsour.2004.09.016 ↗
7. Engineering porous materials for fuel cell applications10.1098/rsta.2005.1684 ↗
8. The role of electrode microstructure on activation and concentration polarizations in solid oxide fuel cells10.1016/S0167-2738(00)00633-0 ↗
9. A particle-based model for predicting the effective conductivities of composite electrodes10.1016/j.jpowsour.2010.04.013 ↗
10. Performance/structure correlation for composite SOFC cathodes10.1016/S0378-7753(96)02361-0 ↗
11. 3D microstructure effects in Ni-YSZ anodes: influence of TPB lengths on the electrochemical performance10.3390/ma8105370 ↗
12. Effect of LSM-YSZ cathode on thin-electrolyte solid oxide fuel cell performance10.1016/S0167-2738(96)00524-3 ↗
13. Microstructural modeling for prediction of transport properties and electrochemical performance in SOFC composite electrodes10.1016/j.ces.2013.06.032 ↗
14. Fabrication and characterization of Ni/ScSZ cermet anodes for IT-SOFCs10.1016/j.ijhydene.2011.01.151 ↗
15. Impact of anode microstructure on solid oxide fuel cells10.1126/science.1176404 ↗
16. Percolation theory in SOFC composite electrodes: effects of porosity and particle size distribution on effective properties10.1016/j.jpowsour.2011.06.087 ↗
17. Effect of starting particulate materials on microstructure and cathodic performance of nanoporous LSM-YSZ composite cathodes10.1016/j.jpowsour.2007.01.095 ↗
18. SOFC anode fabricated by magnetically aligning of Ni particles10.1149/05701.1307ecst ↗
19. Three-dimensional inkjet printed solid oxide electrochemical reactors. I. Yttria-stabilized zirconia electrolyte10.1016/j.electacta.2016.07.103 ↗
20. Solid oxide fuel cell with corrugated thin film electrolyte10.1021/nl800977z ↗
21. Finer features for functional microdevices10.1038/35089130 ↗
22. Simulation study about the geometry of electrode-electrolyte contact in a SOFC10.1007/s10832-012-9766-8 ↗
23. Architectured interfaces and electrochemical modelling in an anode supported SOFC10.1149/06801.2961ecst ↗
24. Mesoscale-structure control at anode/electrolyte interface in solid oxide fuel cell10.1016/j.jpowsour.2010.07.025 ↗
25. Evaluation of SOFC anode polarization characteristics with pillar-based YSZ structure
26. Guidelines for the rational design and engineering of 3D manufactured solid oxide fuel cell composite electrodes10.1149/2.0501702jes ↗
27. The application of hierarchical structures in energy devices: new insights into the design of solid oxide fuel cells with enhanced mass transport10.1039/C8EE01064A ↗
28. High-power lithium ion microbatteries from interdigitated three-dimensional bicontinuous nanoporous electrodes10.1038/ncomms2747 ↗
29. 3-D microbatteries10.1016/S1388-2481(02)00556-8 ↗
30. Progress in three-dimensional (3D) Li-ion microbatteries10.1016/j.ssi.2006.02.048 ↗
31. Prospective use of the 3D printing technology for the microstructural engineering of solid oxide fuel cell components10.3989/cyv.252014 ↗
32. A corrugated mesoscale structure on electrode-electrolyte interface for enhancing cell performance in anode-supported SOFC10.1016/j.jpowsour.2011.04.051 ↗
33. SOFC anode based on YSZ pillars10.1149/06801.1309ecst ↗
34. Anode with Ni-YSZ Nanostructures infiltrated into YSZ pillars
35. Numerical simulation of La0.6Sr0.4Co0.2Fe0.8O3-Gd0.1Ce0.9O1.95 composite cathodes with micro pillars10.1016/j.ijhydene.2019.01.171 ↗
36. Numerical study of solid oxide fuel cell contacting mechanics10.1002/fuce.201700128 ↗
37. Modeling distributed charge-transfer processes in SOFC membrane electrode assemblies10.1149/1.2913152 ↗
38. Physically based impedance modeling of Ni/YSZ cermet anodes10.1149/1.2943411 ↗
39. Electrochemical simulation of planar solid oxide fuel cells with detailed microstructural modeling10.1016/j.electacta.2014.08.120 ↗
40. Combined deconvolution and CNLS fitting approach applied on the impedance response of technical Ni/8YSZ cermet electrodes10.1149/1.2908860 ↗
41. A new framework for physically based modeling of solid oxide fuel cells10.1016/j.electacta.2007.08.030 ↗
42. Micro-modelling of solid oxide fuel cell electrodes10.1016/S0013-4686(97)00063-7 ↗
43. A comprehensive micro-scale model for transport and reaction in intermediate temperature solid oxide fuel cells10.1016/j.electacta.2005.09.041 ↗
44. Effective conductivity in random porous media with convex and non-convex porosity10.1016/j.ijheatmasstransfer.2013.12.041 ↗
45. Mathematical modeling of the coupled transport and electrochemical reactions in solid oxide steam electrolyzer for hydrogen production10.1016/j.electacta.2007.04.084 ↗
46. Mason · 1983
47. Common inconsistencies in modeling gas transport in porous electrodes: the dusty-gas model and the Fick law10.1016/j.jpowsour.2015.01.007 ↗
48. Thermodynamic and transport properties of gases for use in solid oxide fuel cell modelling10.1016/S0378-7753(02)00277-X ↗
49. TauFactor: an open-source application for calculating tortuosity factors from tomographic data10.1016/j.softx.2016.09.002 ↗
50. Tortuosity in electrochemical devices: a review of calculation approaches
51. On tortuosity and the tortuosity factor in flow and diffusion through porous media10.1016/0009-2509(89)85053-5 ↗
52. The electrochemistry of Ni pattern anodes used as solid oxide fuel cell model electrodes10.1149/1.1372219 ↗
53. Evaluation of SOFC anode polarization simulation using three-dimensional microstructures reconstructed by FIB tomography10.1016/j.electacta.2011.02.010 ↗
54. Mathematical modeling of mass and charge transport and reaction in a solid oxide fuel cell with mixed ionic conduction10.1016/j.ces.2011.10.025 ↗
55. Gould · 2013
56. Worldwide SOFC technology overview and benchmark10.1111/j.1744-7402.2005.02049.x ↗
57. Properties of Ni/YSZ porous cermets for SOFC anode substrates prepared by tape casting and coat-mix process10.1016/S0924-0136(99)00214-9 ↗
58. Quantification of Ni/YSZ-anode microstructure parameters derived from FIB-tomography
59. Elastic modulus and internal friction of SOFC electrolytes at high temperatures under controlled atmospheres10.1016/j.jpowsour.2011.05.040 ↗
60. Ni-8YSZ cermet re-oxidation of anode supported solid oxide fuel cell: from kinetics measurements to mechanical damage prediction10.1016/j.ijhydene.2012.06.019 ↗
61. 2018
62. Optimization of the microstructure of porous composite cathodes in solid oxide fuel cells10.1002/aic.12652 ↗
63. Morphology and electrochemical activity of SOFC composite cathodes: II. Mathematical modelling10.1007/s10800-008-9691-3 ↗
64. A nature-inspired approach to reactor and catalysis engineering10.1016/j.coche.2012.03.002 ↗
65. Popov · 2010