journal article·2019-06

Electrochemical investigation of multi-fuel based low temperature nano-composite anode for solid oxide fuel cell

Fida Hussain, M. Ashfaq Ahmad, Rizwan Raza, M. Ajaml Khan, Zohaib Ur Rehman, Raja Ali Riaz, Ghazanfar Abbas

Publisher page

Abstract

Abstract Extensive efforts have been made in order to develop multi-fuel-based low temperature solid oxide fuel cell for direct conversion of hydrocarbons to electric power. It is extremely difficult to operate due to the C H activation and its tremendously sluggish oxidation reduction in the low temperature range from 300 to 600 °C. The structural and electrochemical properties of novel anode material Ni0.6(Ba0.3Ce0.2Zn0.5)0.4 have been investigated in the presence of hydrogen, natural gas, ethanol, glucose, and sugar-cane at low temperature of 600 °C. Through sol-gel method the proposed oxide material is synthesized. The composite average crystalline size has been found 25–90 nm by both scanning electron microscopy and X-ray diffraction techniques. The ultraviolet– visible and Fourier transform infrared techniques are used to determine band gap and absorption spectrum respectively. The power density of the cell at various fuels has been observed and measurements indicate that it varies from 57 to 315 mWcm−2 at 600 °C among different fuels at anode side. The current study reveals that proposed anode Ni0.6(Ba0.3Ce0.2Zn0.5)0.4 is promising multi-fuel anode material for low-temperature solid oxide fuel cell, and it does not need to reform hydrocarbon fuels in order to fully utilize the advantage of these cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Catalytic Processes in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Direct-methane solid oxide fuel cell (SOFC) with Ni-SDC anode-supported cell10.1016/j.ijhydene.2017.07.117 ↗
2. Enhanced electrochemical performance, water storage capability and coking resistance of a Ni+BaZr0.1Ce0.7Y0.1Yb0.1anode for solid oxide fuel cells operating on ethanol10.1016/j.ces.2014.12.011 ↗
3. Comparative electrochemical investigation of zinc based nano-composite anode materials for solid oxide fuel cell10.1016/j.ceramint.2018.09.288 ↗
4. A direct-methane fuel cell with a ceria-based anode10.1038/23220 ↗
5. Improving the stability of direct methane solid oxide fuel cells using anode barrier layers10.1016/j.jpowsour.2005.09.060 ↗
6. Preparation and electrochemical performance of silver impregnated Ni-YSZ anode for solid oxide fuel cell in dry methane10.1016/j.ijhydene.2015.09.121 ↗
7. Direct operation of methane fueled solid oxide fuel cells with Ni cermet anode via Sn modification10.1016/j.ijhydene.2016.04.252 ↗
8. A robust fuel cell operated on nearly dry methane at 500°C enabled by synergistic thermal catalysis and electro catalysis10.1038/s41560-018-0262-5 ↗
9. Numerical model of planar anode supported solid oxide fuel cell fed with fuel containing H2S operated in direct internal reforming mode (DIR-SOFC)10.1016/j.apenergy.2018.09.092 ↗
10. Direct hydrocarbon solid oxide fuel cells10.1021/cr020725g ↗
11. Materials for fuel-cell technologies10.1038/35104620 ↗
12. Performance of a solid oxide fuel cell short stack with biogas feeding10.1016/j.apenergy.2014.03.040 ↗
13. The effect of heavy tars (toluene and naphthalene) on the electrochemical performance of an anode- supported SOFC running on bio-syngas10.1016/j.renene.2016.07.029 ↗
14. Surface tuned La0.9Ca0.1Fe0.9Nb0.1 based anode for direct methane solid oxide fuel cells by infiltration method10.1016/j.electacta.2017.03.046 ↗
15. Biowaste for SOFCs10.1016/j.egypro.2016.11.054 ↗
16. Durable direct ethanol anode-supported solid oxide fuel cell10.1016/j.apenergy.2017.04.086 ↗
17. Direct methanol utilization in intermediate temperature liquid-tin anode solid oxide fuel cells10.1016/j.apenergy.2014.08.030 ↗
18. Spring based connection of external wires to a thin film temperature sensor integrated inside a solid oxide fuel cell10.1038/s41598-019-39518-2 ↗
19. Materials for intermediate-temperature solid-oxide fuel cells10.1146/annurev-matsci-070813-113426 ↗
20. Nano grained Sr and Zr co-doped BaCeO3 electrolytes for intermediate temperature solid oxide fuel cells10.1016/j.ceramint.2017.07.192 ↗
21. Synthesize and characterization of ceria based nano-composite materials for low temperature solid oxide fuel cell10.1016/j.ijhydene.2018.01.166 ↗
22. Development of cathodes for methanol and ethanol fuelled low temperature (300–600◦C) solid oxide fuel cells10.1016/j.ijhydene.2006.12.012 ↗
23. Direct operation of Ag-based anode solid oxide fuel cells on propane10.1016/j.jpowsour.2017.08.111 ↗
24. Chen · Fuel Cells · 2012 · 12 · 8610.1002/fuce.201100106 ↗
25. Zhou · Electrochim. Acta · 2008 · 53 · 519510.1016/j.electacta.2008.02.032 ↗
26. Fukui · J. Eur. Ceram. Soc. · 2003 · 23 · 296310.1016/S0955-2219(03)00311-X ↗
27. A nanostructure anode (Cu0.2Zn0.8) for low- temperature solid oxide fuel cell at 400-600oC10.1016/j.jpowsour.2010.07.044 ↗
28. Study of CuNiZnGdCe nanocomposite anode for low temperature SOFC10.1166/nnl.2012.1306 ↗
29. A highly coking-resistant solid oxide fuel cell with a nickel doped ceria: Ce1-xNixO2-y reformation layer10.1016/j.ijhydene.2014.01.092 ↗
30. Direct oxidation of hydrocarbons in a solid-oxide fuel cell10.1038/35005040 ↗
31. BaZr0.1Ce0.7Y0.1Yb0.1 as highly active and carbon tolerant anode for direct hydrocarbon solid oxide fuel cells10.1016/j.ijhydene.2014.01.132 ↗
32. Barium- and strontium-containing anode materials toward ceria based solid oxide fuel cells with high open circuit voltages10.1021/acsaem.8b00825 ↗
33. Calcium-doped ceria materials for anode of solid oxide fuel cells running on methane fuel10.1016/j.jpowsour.2017.01.113 ↗
34. Improvement of anode performance by surface modification for solid oxide fuel cell running on hydrocarbon fuel10.1016/j.jpowsour.2004.05.002 ↗
35. A NiFeCu alloy anode catalyst for direct-methane solid oxide fuel cells10.1016/j.jpowsour.2014.02.008 ↗
36. Effect of nickel content and preparation method on the performance of Ni–Al2O3 towards the applications in solid oxide fuel cells10.1016/j.ijhydene.2011.05.109 ↗
37. Ni–LnOx(Ln¼La, Ce, Pr, Nd, Sm, Eu, and Gd) cermet anodes for intermediate-temperature solid oxide fuel cells10.1016/j.jpowsour.2009.09.035 ↗
38. Preparation and characterization of Samaria-doped ceria electrolyte materials for solid oxide fuel cells10.1111/j.1551-2916.2007.01923.x ↗
39. A high-performance cathode for the next generation of solid oxide fuel cells10.1038/nature02863 ↗
40. Rare-earth metals: is gadolinium really ferromagnetic?10.1038/43363 ↗
41. Mixed ion and electron conductive composites for single component fuel cells: I. Effects of composition and pellet thickness10.1016/j.jpowsour.2011.12.017 ↗
42. Electrochemical studies of perovskite cathode material for direct natural gas fuel cell
43. Mixed ion and electron conductive composites for single component fuel cells:I. Effects of composition and pellet thickness10.1016/j.jpowsour.2012.05.045 ↗
44. Functional ceria-salt-composite materials for advanced ITSOFC applications10.1016/S0378-7753(02)00592-X ↗
45. Electrochemical study of nanostructured electrode for low-temperature solid oxide fuel cell (LTSOFC)10.1002/er.3090 ↗
46. Fourier transform infrared and ultraviolet-visible spectroscopic characterization of ammonium acetate and ammonium chloride: an impact of biofield treatment
47. Influence of pH on the fluorescence properties of graphene quantum dots using ozonation pre-oxide hydrothermal synthesis10.1039/c2jm35471c ↗
48. The improvement of barium-containing anode for ceria-based electrolyte with electron-blocking layer10.1016/j.jallcom.2016.09.262 ↗
49. Utilization of ZnO nanocones for the photocatalytic degradation of acridine orange10.1166/jnn.2011.4166 ↗
50. Growth and properties of Ag-doped ZnO nanoflowers for highly sensitive pheny hydrazine chemical sensor application10.1016/j.talanta.2012.02.030 ↗
51. Structural and optical characterization of ZnO nanoparticles synthesized by micro emulsion route10.56431/p-q38442 ↗
52. Synthesis of ZnO nanoparticles using carboxymethyl cellulose hydrogel10.3923/ajaps.2014.798.803 ↗