journal article·2019-05

X-ray fluorescence nano-imaging of long-term operated solid oxide electrolysis cells

Julie Villanova, Sabine Schlabach, Annabelle Brisse, Aline Léon

Publisher page

Abstract

Abstract In this work, we investigate using nanoscale X-ray fluorescence spectroscopy the degradation processes of a cathode and an electrolyte supported cell, produced by two different suppliers, that have been long-term operated in electrolysis mode. High-resolution compositional analysis in combination with high lateral resolution are presented in the format of a 2D map with 50 nm resolution for Ni, Y, Ce, Gd, La, Sr, Co, Fe. We report on the different elements that are diffusing already during the sintering process as well as their evolution after long-term operation. In both type of cell, Co is the element that is highly segregating from the LSCF electrode during the electrochemical reaction. The CGO barrier does not prevent the diffusion of Sr in the electrolyte of the CSC cell while it does in the ESC cell. In addition, the contact layer between the hydrogen electrode and the electrolyte in the ESC cell seems to prevent the Ni depletion. A high concentration of gadolinium from the CGO layer is visible at the CGO/electrolyte interface on the oxygen electrode side as well as on the hydrogen electrode side in the ESC cell. The gadolinium concentration significantly increases during the cell operation to form a layer of a few micrometers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Molten salt chemistry and electrochemical processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Microstructural comparison of solid oxide electrolyser cells operated for 6100 h and 9000 h10.1016/j.jpowsour.2014.10.188 ↗
2. 23,000 h steam electrolysis with an electrolyte supported solid oxide cell10.1016/j.ijhydene.2017.01.072 ↗
3. Ni/YSZ electrodes structures optimized for increased electrolysis performance and durability10.1016/j.ssi.2016.06.003 ↗
4. A 2D and 3D X-ray μ-diffraction and μ-fluorescence study of a mixed ionic electronic conductor10.1016/j.ijhydene.2016.11.094 ↗
5. Microstructural degradation of Ni/YSZ electrodes in solid oxide electrolysis cells under high current10.1149/2.098308jes ↗
6. Investigation of the microstructural effect of Ni-Yttria stabilized zirconia anode for solid-oxide fuel cell using micro-beam x-ray absorption spectroscopy analysis10.1016/j.jpowsour.2012.07.108 ↗
7. Recent advances in high temperature electrolysis using solid oxide fuel cells: a review10.1016/j.jpowsour.2011.12.019 ↗
8. A review and comprehensive analysis of degradation mechanisms of solid oxide electrolysis cells10.1016/j.ijhydene.2013.09.045 ↗
9. Current developments in reversible solid oxide fuel cells10.1016/j.rser.2016.03.005 ↗
10. Technological development of hydrogen production by solid oxide electrolyzer cell (SOEC)10.1016/j.ijhydene.2008.02.048 ↗
11. Performance of solid oxide electrolysis cells based on scandia stabilized zirconia10.1016/j.jpowsour.2008.12.139 ↗
12. Micro-spectroscopic study of the degradation of scandia and ceria stabilized zirconia electrolytes in solid oxide electrolysis cells10.1016/j.ijhydene.2011.07.082 ↗
13. Long-term steam electrolysis with electrolyte-supported solid oxide cells10.1016/j.electacta.2015.04.141 ↗
14. Fabrication and evaluation of flat thick film type solid oxide fuel cell10.1016/0167-2738(90)90247-O ↗
15. The electrochemical performance of LSM/zirconia–yttria interface as a function of a-site non-stoichiometry and cathodic current treatment10.1016/S0167-2738(98)00295-1 ↗
16. Ferrite-based perovskites as cathode materials for anode-supported solid oxide fuel cells: Part I. Variation of composition10.1016/j.ssi.2005.03.009 ↗
17. Fundamental mechanisms limiting solid oxide fuel cell durability10.1016/j.jpowsour.2008.02.016 ↗
18. Stability and performance of infiltrated La0.8Sr0.2Cox Fe1− xO3 electrodes with and without Sm0.2Ce0.8O1.9 interlayers10.1016/j.jpowsour.2011.03.022 ↗
19. Degradation mechanisms of La–Sr–Co–Fe–O3 SOFC cathodes10.1149/1.2266160 ↗
20. Durability of high-performance Ni-yttria stabilized zirconia supported solid oxide electrolysis cells at high current density10.1016/j.jpowsour.2014.03.133 ↗
21. On the conductivity degradation and phase stability of solid oxide fuel cell (SOFC) zirconia electrolytes analysed via XRD10.1016/j.ssi.2014.06.006 ↗
22. ID16B: a hard X-ray nanoprobe beamline at the ESRF for nano-analysis10.1107/S1600577515019839 ↗
23. Cation diffusion and segregation at the interface between samarium-doped ceria and LSCF or LSFCu cathodes investigated with X-ray microspectroscopy10.1021/acsami.7b13377 ↗
24. Electrode-electrolyte compatibility in solid-oxide fuel cells: investigation of the LSM-LNC interface with X-ray microspectroscopy10.1021/acs.chemmater.5b00142 ↗
25. Degradation phenomena in a solid oxide electrolysis cell after 9000 h of operation10.1016/j.jpowsour.2012.09.061 ↗
26. Further Data on the Cell (KeraCell III) Can Be Found on the Company Webpage www.kerafol.com.
27. A multiplatform code for the analysis of energy-dispersive X-ray fluorescence spectra10.1016/j.sab.2006.12.002 ↗
28. A Mössbauer spectral study of degradation in La0.58Sr0.4Fe0.5Co0.5O3-x after long-term operation in solid oxide electrolysis cells10.1016/j.ssi.2017.10.003 ↗
29. Lattice expansion of LSCF-6428 cathodes measured by in-situ XRD during SOFC operation10.1016/j.jpowsour.2011.09.099 ↗
30. Determination of the impedance contributions in anode supported solid oxide fuel cells with (La,Sr)(Co,Fe)O3-d cathode10.1016/j.ijhydene.2014.09.081 ↗
31. Element interdiffusion at electrolyte-cathode interfaces in ceramic high temperature fuel cells10.1016/j.ssi.2009.01.014 ↗
32. Effect of polarization on Sr and Zr diffusion behavior in LSCF/GDC/YSZ system10.1016/j.ssi.2014.04.002 ↗
33. Multi-scale analysis of the diffusion barrier layer of gadolinia-doped ceria in a solid oxide fuel cell operated in a stack for 3000 h10.1016/j.jpowsour.2017.01.109 ↗
34. Martinez-Amesti · J. Power Sources · 2008 · 185 · 40110.1016/j.jpowsour.2008.06.049 ↗
35. Analysis of solid state reaction at the interface of yttria-doped ceria/yttria-stabilized zirconia10.1016/S0167-2738(98)00293-8 ↗
36. Understanding degradation of solid oxide electrolysis cells through modelling of electrochemical potential profiles10.1016/j.electacta.2015.12.067 ↗
37. Chen · J. Electrochem. Soc. · 2013 · 160 · F88310.1149/2.098308jes ↗
38. Cation self-diffusion of 44Ca, 88Y and 96Zr in single-crystalline calcia- and yttria-doped zirconia10.1063/1.1628379 ↗
39. High temperature electrolysis in alkaline cells, solid proton conducting cells, and solid oxide cells10.1021/cr5000865 ↗
40. Impact of nickel agglomeration on solid oxide cell operated in fuel cell and electrolysis modes10.1016/j.jpowsour.2018.06.097 ↗
41. Silica segregation in the Ni/YSZ electrode10.1149/1.2733861 ↗
42. Relation between Ni particle shape change and Ni migration in Ni–YSZ electrodes – a hypothesis10.1002/fuce.201600222 ↗
43. The diffusions and associated interfacial layer formation between thin film electrolyte and cermet anode in IT-SOFC10.1016/j.jallcom.2011.07.080 ↗