journal article·2018-10

High temperature polymer electrolyte membrane fuel cells with Polybenzimidazole-Ce0.9Gd0.1P2O7 and polybenzimidazole-Ce0.9Gd0.1P2O7-graphite oxide composite electrolytes

Bhupendra Singh, Nitika Devi, Avanish Kumar Srivastava, Rajesh K. Singh, Sun-Ju Song, N. Nambi Krishnan, Anastasiia Konovalova, Dirk Henkensmeier

Publisher page

Abstract

Abstract In this work, polybenzimidazole based composite membranes are fabricated using polybenzimidazole, Ce0.9Gd0.1P2O7 and graphite oxide by solution casting procedure. The microstructural, mechanical and electrical properties of the phosphoric acid-doped composite membranes are characterized for fuel cell applications. Addition of graphite oxide in the composite leads to improvement in homogeneous dispersion of higher amount, 31 wt%, of Ce0.9Gd0.1P2O7. With the increasing amount of Ce0.9Gd0.1P2O7 in the composite membranes the amount of phosphoric acid loading decreases, but the proton conductivity of the composite membrane is higher than that is reported for the phosphoric acid-doped polybenzimidazole membranes. At 180 °C, a maximum conductivity of 182 mS cm−1 for polybenzimidazole/Ce0.9Gd0.1P2O7 membrane with 24 wt% Ce0.9Gd0.1P2O7 and 199 mS cm−1 for polybenzimidazole/Ce0.9Gd0.1P2O7/graphite oxide membrane with 31 wt% Ce0.9Gd0.1P2O7 is observed. The H2-Air fuel cells operating at 160 °C with ∼250 μm thick polybenzimidazole/Ce0.9Gd0.1P2O7 electrolyte shows open circuit voltage of 0.938 V and maximum power density of 255 mW cm−2 with 640 mA cm−2 current at 160 °C whereas the corresponding values with ∼200 μm thick polybenzimidazole/Ce0.9Gd0.1P2O7/graphite oxide membrane are 0.976 V and 307 mW cm−2 with 800 mA cm−2 current, respectively. However, irrespective of the increased conductivity at the higher temperatures, the maximum power density decreases with increasing temperature >160 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. High temperature PEM fuel cells10.1016/j.jpowsour.2006.05.034 ↗
2. Pasupathi · 2016
3. A review on proton conducting electrolytes for clean energy and intermediate temperature-solid oxide fuel cells10.1016/j.rser.2017.05.147 ↗
4. Polybenzimidazole (PBI-OO) based composite membranes using sulfophenylated TiO2 as both filler and crosslinker, and their use in the HT-PEM fuel cell10.1016/j.memsci.2018.05.006 ↗
5. Phosphoric acid doped polysulfone membranes with aminopyridine pendant groups and imidazole cross-links10.1016/j.eurpolymj.2015.08.026 ↗
6. Influence of different side-groups and cross-links on phosphoric acid doped Radel-based polysulfone membranes for high temperature polymer electrolyte fuel cells10.1016/j.electacta.2016.12.088 ↗
7. Polymer and composite membranes for proton-conducting, high-temperature fuel cells: a critical review10.3390/ma10070687 ↗
8. Physicochemical properties of phosphoric acid doped polybenzimidazole membranes for fuel cells10.1016/j.memsci.2005.10.005 ↗
9. High temperature creep behavior of phosphoric acid-polybenzimidazole gel membranes10.1002/polb.23791 ↗
10. Oxidative degradation of polybenzimidazole membranes as electrolytes for high temperature proton exchange membrane fuel cells10.1002/fuce.201000146 ↗
11. Cross-linked polybenzimidazole membranes for fuel cells10.1021/cm0627793 ↗
12. Phosphoric acid doped crosslinked polybenzimidazole (PBI-OO) blend membranes for high temperature polymer electrolyte fuel cells10.1016/j.memsci.2017.09.049 ↗
13. Development and characterization of acid-doped polybenzimidazole/sulfonated polysulfone blend polymer electrolytes for fuel cells10.1149/1.1366621 ↗
14. Novel phosphoric acid-doped PBI-blends as membranes for high-temperature PEM fuel cells10.1039/C5TA01337B ↗
15. Promising TiOSO4 composite polybenzimidazole-based membranes for high temperature PEMFCs10.1002/cssc.201100032 ↗
16. Structure and properties of polybenzimidazole/silica nanocomposite electrolyte membrane: influence of organic/inorganic interface10.1021/am506260j ↗
17. Development of polybenzimidazole/graphene oxide composite membranes for high temperature PEM fuel cells10.1016/j.ijhydene.2016.07.009 ↗
18. Organic/inorganic composite membranes based on polybenzimidazole and nano-SiO210.1016/j.electacta.2009.08.011 ↗
19. A novel titanium PBI-based composite membrane for high temperature PEMFCs10.1016/j.memsci.2010.11.051 ↗
20. High-temperature proton exchange membranes based on polybenzimidazole and clay composites for fuel cells10.1016/j.memsci.2011.08.038 ↗
21. Proton-conducting composite membranes based on polybenzimidazole and sulfonated mesoporous organosilicate10.1016/j.ijhydene.2013.04.150 ↗
22. An H3PO4-doped polybenzimidazole/Sn0.95Al0.05P2O7 composite membrane for high-temperature proton exchange membrane fuel cells10.1016/j.jpowsour.2011.03.094 ↗
23. Membranes based on phosphotungstic acid and polybenzimidazole for fuel cell application10.1016/S0378-7753(00)00401-8 ↗
24. A review on phosphate based, solid state, protonic conductors for intermediate temperature fuel cells10.1088/0953-8984/23/23/234110 ↗
25. Mn2+-doped CeP2O7 composite electrolytes for application in low temperature proton-conducting ceramic electrolyte fuel cells10.1149/2.090401jes ↗
26. Ionic conductivity of Mn2+ doped dense tin pyrophosphate electrolytes synthesized by a new co-precipitation method10.1016/j.jeurceramsoc.2014.04.024 ↗
27. Fabrication of dense cerium pyrophosphate-polystyrene composite for application as low-temperature proton-conducting electrolytes10.1149/2.0351510jes ↗
28. Ionic conductivity of Gd3+ doped cerium pyrophosphate electrolytes with core-shell structure10.1149/2.062404jes ↗
29. A H3PO4-doped polytetrafluoroethylene/Sn0.95Mg0.05P2O7 proton-conducting inorganic-organic composite electrolyte10.1016/j.matlet.2015.01.046 ↗
30. Proton conductors of cerium pyrophosphate for intermediate temperature fuel cell10.1016/j.electacta.2011.05.040 ↗
31. Ionic conduction in Sn1-xScxP2O7 for intermediate temperature fuel cells10.1016/j.jpowsour.2010.07.067 ↗
32. Intermediate temperature proto-conducting membrane electrolytes for fuel cells10.1002/wene.64 ↗
33. Fast ionic conduction in tetravalent metal pyrophosphate-alkali carbonate composites: new potential electrolytes for intermediate-temperature fuel cells10.1016/j.jpowsour.2017.02.006 ↗
34. An approach for restoring the proton conductivity of sintered tin pyrophosphate membranes for intermediate temperature fuel cell10.1016/j.jpowsour.2015.12.045 ↗
35. Fabrication of dense Ce0.9Mg0.1P2O7-PmOn composites by microwave heating for application as electrolyte in intermediate-temperature fuel cells10.1016/j.ceramint.2017.12.252 ↗
36. A polybenzimidazole/sulfonated graphite oxide composite membrane for high temperature polymer electrolyte membrane fuel cells10.1039/c1jm11159k ↗
37. A novel polybenzimidazole composite modified by sulfonated graphene oxide for high temperature proton exchange membrane fuel cells in anhydrous atmosphere10.1002/app.44986 ↗
38. Graphite oxide/functionalized graphene oxide and polybenzimidazole composite membranes for high temperature proton exchange membrane fuel cells10.1016/j.ijhydene.2014.03.061 ↗
39. Graphene-based materials in electrochemistry10.1039/b923596e ↗
40. B. Singh, L. Mathur, S.K. Gautam, D. Kumar, A method for synthesis of cerium(IV) pyrophosphate compounds, Indian Patent filed on 08.02.2018; Application No. 201811004846.
41. Improved synthesis of graphene oxide10.1021/nn1006368 ↗
42. Titanium composite PBI-based membranes for high temperature polymer electrolyte membrane fuel cells. Effect on titanium dioxide amount10.1039/C1RA01084K ↗
43. High temperature proton exchange membranes based on cerium sulfophenyl phosphate doped polybenzimidazole by end-group protection and hot-pressing method10.1016/j.ijhydene.2016.09.174 ↗
44. Graphene oxide/polybenzimidazole composites fabricated by a solvent- exchange method10.1016/j.carbon.2010.11.036 ↗
45. Improved polybenzimidazole films for H3PO4-doped PBI-based high temperature PEMFC10.1016/j.memsci.2007.08.028 ↗
46. Synthesis and characterisation of poly[2,2-(m-phenylene)-5,5-bibenzimidazole] as polymer electrolyte membrane for high temperature PEMFCs10.1016/j.memsci.2006.01.049 ↗
47. Anhydrous proton-conducting polymers for high-temperature PEMFCs
48. Fabrication of dense cerium pyrophosphate-polystyrene composite for application as low-temperature proton-conducting electrolytes10.1149/2.0351510jes ↗
49. Enhancement of the fuel cell performance of a high temperature proton exchange membrane fuel cell running with titanium composite polybenzimidazole-based membranes10.1016/j.jpowsour.2011.06.011 ↗
50. Electrical conductivity of M2+-doped (M=Mg, Ca, Sr, Ba) cerium pyrophosphate-based composite electrolyte for low-temperature proton conducting electrolyte fuel cells10.1016/j.jallcom.2013.06.017 ↗
51. Studies on ionic conductivity of Sr2+-doped CeP2O7 electrolyte in humid atmosphere10.1021/jp311547g ↗
52. Mechanical properties of hybrid organic-inorganic materials10.1039/b507309j ↗
53. Proton conduction in Sn0.95Al0.05P2O7-PBI-PTFE composite membrane10.1149/1.2897758 ↗
54. Comprehensive performance enhancement of polybenzimidazole based high temperature proton exchange membranes by doping with a novel intercalated proton conductor10.1016/j.ijhydene.2018.04.089 ↗
55. Modified silicon carbide whisker reinforced polybenzimidazole used for high temperature proton exchange membrane10.1016/j.jechem.2017.05.002 ↗
56. A PBI-Sb0.2Sn0.8P2O7-H3PO4 composite membrane for intermediate temperature fuel cells10.1002/fuce.201100089 ↗
57. Strengthening phosphoric acid doped polybenzimidazole membranes with siloxane networks for using as high temperature proton exchange membranes10.1002/macp.201700009 ↗
58. Novel composite membranes of triazole modified graphene oxide and polybenzimidazole for high temperature polymer electrolyte membrane fuel cell applications10.1039/C5RA16554G ↗
59. Effect of primary parameters on the performance of PEM fuel cell10.1016/j.ijhydene.2010.03.112 ↗
60. Improving the performance of high-temperature PEM fuel cells based on PBI electrolyte10.1016/j.jpowsour.2006.01.047 ↗
61. Polybenzimidazole/SiO2 hybrid membranes for high temperature proton exchange membrane fuel cells10.1016/j.ijhydene.2016.02.043 ↗