Electrical performance of nanostructured strontium-doped lanthanum manganite impregnated onto yttria-stabilized zirconia backbone
Source abstract
Abstract
Abstract Strontium-doped lanthanum manganite (LSM) nanoparticles are deposited onto porous yttria-stabilized zirconia frameworks via an ion impregnation/infiltration process. The apparent conductivity of the impregnated LSM nanostructure is investigated regarding the fabricating parameters including LSM loading, heat treatment temperature, heating rate, and annealing at 750 °C for 400 h. Besides, the conductivity, the intrinsic conductivity as well as Bruggeman factor of the impregnated LSM is estimated from the apparent conductivity using the analytical model for the three-dimensional impregnate network. The conductivity increases with LSM loading while the interfacial polarization resistance exhibits the lowest value at an optimal loading of about 5 vol.%, which corresponds to the largest three-phase boundary as predicted using the numerical infiltration methodology. At the optimal loading, the area specific ohmic resistance of the impregnated LSM is about 0.032 Ω cm 2 at 700 °C for a typical impregnated cathode of 30 μm thick. It is only 5.5% of the cathode interfacial polarization resistance and 3.3% of the total resistance for a single cell consisting of a Ni-YSZ support, a 10 μm thick electrolyte and a 30 μm thick cathode, demonstrating that the ohmic resistance is negligible in the LSM impregnated cathode for SOFCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Ferroelectric and Piezoelectric Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. High-performance SOFC cathodes prepared by infiltration10.1002/adma.200802428 ↗
2. Nano-structured composite cathodes for intermediate-temperature solid oxide fuel cells via an infiltration/impregnation technique10.1016/j.electacta.2010.02.019 ↗
3. Fabrication and modification of solid oxide fuel cell anodes via wet impregnation/infiltration technique10.1016/j.jpowsour.2013.03.025 ↗
4. Synthesis of dispersed and contiguous nanoparticles in solid oxide fuel cell electrodes10.1002/fuce.200800030 ↗
5. Enhancing SOFC cathode performance by surface modification through infiltration10.1039/c3ee42926a ↗
6. Characterization of LSM-YSZ composites prepared by impregnation methods10.1149/1.1926669 ↗
7. High performance solid oxide fuel cells with electrocatalytically enhanced (La, Sr)MnO3 cathodes10.1016/j.elecom.2009.03.009 ↗
8. LSM-infiltrated solid oxide fuel cell cathodes10.1149/1.2206011 ↗
9. Synthesis and stability of a nanoparticle-infiltrated solid oxide fuel cell electrode10.1149/1.2434203 ↗
10. La0.85Sr0.15MnO3−δ infiltrated Y0.5Bi1.5O3 cathodes for intermediate-temperature solid oxide fuel cells10.1149/1.3099321 ↗
11. LSM-infiltrated LSCF cathodes for solid oxide fuel cells10.1016/S2095-4956(13)60072-8 ↗
12. A particle-layer model for solid-oxide-fuel-cell cathodes with different structures10.1016/j.jpowsour.2009.12.114 ↗
13. Geometric properties of nanostructured solid oxide fuel cell electrodes10.1149/2.057303jes ↗
14. Effect of polarization on and implications for characterization of LSM-YSZ composite cathodes10.1149/1.1667792 ↗
15. The effect of porous composite electrode structure on solid oxide fuel cell performance. 1. Theoretical analysis10.1149/1.1837360 ↗
16. Effect of the ionic conductivity of the electrolyte in composite SOFC cathodes10.1149/1.3581109 ↗
17. Low-temperature fabrication of oxide composite for solid-oxide fuel cells10.1111/j.1551-2916.2004.00331.x ↗
18. Characteristics of La0.85Sr0.15MnO3−δ powders synthesized by a glycine-nitrate process10.1002/fuce.200600009 ↗
19. Facile one-step forming of NiO and yttrium-stabilized zirconia composite anodes with straight open pores for planar solid oxide fuel cell using phase-inversion tape casting method10.1016/j.jpowsour.2014.10.190 ↗
20. Nano-structured Sm0.5Sr0.5CoO3−δ electrodes for intermediate-temperature SOFCs with zirconia electrolytes10.1016/j.ssi.2010.05.024 ↗
21. Development of lanthanum strontium manganite perovskite cathode materials of solid oxide fuel cells: a review10.1007/s10853-008-2966-6 ↗
22. Electronic conductivity, Seebeck coefficient, defect and electronic structure of nonstoichiometric La1−xSrxMnO310.1016/S0167-2738(00)00662-7 ↗
23. Chemical and electrical properties of LSM cathodes prepared by mechanosynthesis10.1016/j.jpowsour.2013.11.093 ↗
24. Anode substrate with continuous porosity gradient for tubular solid oxide fuel cells10.1016/j.elecom.2013.11.009 ↗
25. Micro-tubular solid oxide fuel cells with graded anodes fabricated with a phase inversion method10.1016/j.jpowsour.2010.08.074 ↗
26. Micro-tubular solid oxide fuel cells fabricated by phase-inversion method10.1016/j.elecom.2010.02.024 ↗
27. Ionic conductivity of impregnated samaria doped ceria for solid oxide fuel cells10.1016/j.electacta.2014.05.113 ↗
28. Tortuosity factor of three-dimensional infiltrate network10.1016/j.jpowsour.2014.06.141 ↗
29. Evaluation of La0.8Sr0.2Cu1−xMnxOd double perovskite for SOFCs10.1149/1.2729216 ↗
30. Origin of the initial polarization behavior of Sr-doped LaMnO3 for O2 reduction in solid oxide fuel cells10.1016/S0167-2738(00)00806-7 ↗
31. Investigation of chemisorbed oxygen, surface segregation and effect of post-treatments on La0.8Sr0.2MnO3 powder and screen-printed layers for solid oxide fuel cell cathodes10.1016/j.apsusc.2006.10.019 ↗
32. X-ray photoelectron spectroscopy of La0.5Sr0.5MnO310.1016/j.matlet.2005.01.038 ↗
33. Structure/performance relations for Ni/yttria-stabilized zirconia anodes for solid oxide fuel cells10.1149/1.1393220 ↗
34. Monte carlo simulations of polarization resistance of composite electrodes for solid oxide fuel cells10.1149/1.1836927 ↗