A newly-developed effective direct current assisted sintering technique for electrolyte film densification of anode-supported solid oxide fuel cells
Source abstract
Abstract
Abstract In order to lower the sintering temperature and shorten firing time, a novel, effective and facile technique has been developed for sintering Yttria-stabilized zirconia (YSZ) electrolyte thin film. Herein this technique, which employs a weak direct current (DC), is used for the first time in the manufacture of the anode-supported solid oxide fuel cell (SOFC). A single cell is directly assembled using a pre-sintered anode/electrolyte and screen printed cathode and subsequently sintered under electric assistance from room temperature to 800 °C at a heating rate of 5 °C min−1. A fully dense YSZ electrolyte film can be observed by scanning electron microscopy (SEM) and the open circuit voltages (OCVs) are in accordance with theoretical values, confirming that the cell possesses a dense YSZ film. Using hydrogen fuel, the maximum power density of this cell was 0.8, 1.1 and 1.4 W cm−2 at 650, 700 and 750 °C, respectively. We believe this DC assisted sintering technique (DC-AST) may not only reduce the cost, but also maintain the anode nanostructure, thus offering a potentially useful manufacturing technique for SOFCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Minh · J. Am. Ceram. Soc. · 1993 · 76 · 56310.1111/j.1151-2916.1993.tb03645.x ↗
2. Singhal · Solid State Ionics · 2000 · 135 · 30510.1016/S0167-2738(00)00452-5 ↗
3. Steele · Solid State Ionics · 2000 · 134 · 310.1016/S0167-2738(00)00709-8 ↗
4. Li · J. Alloys Compd. · 2011 · 509 · 538810.1016/j.jallcom.2011.02.057 ↗
5. Yoon · J. Power Sources · 2007 · 172 · 3910.1016/j.jpowsour.2007.03.003 ↗
6. Batista · Ceram. Int. · 2011 · 37 · 104710.1016/j.ceramint.2010.11.031 ↗
7. Munir · J. Am. Ceram. Soc. · 2011 · 94 · 110.1111/j.1551-2916.2010.04210.x ↗
8. Das · Bull. Mater. Sci. · 2009 · 32 · 110.1007/s12034-009-0001-4 ↗
9. Cologna · J. Am. Ceram. Soc. · 2010 · 93 · 355610.1111/j.1551-2916.2010.04089.x ↗
10. Hao · J. Power Sources · 2012 · 210 · 8610.1016/j.jpowsour.2012.03.006 ↗
11. Prette · J. Power Sources · 2011 · 196 · 206110.1016/j.jpowsour.2010.10.036 ↗
12. Cologna · J. Am. Ceram. Soc. · 2011 · 94 · 31610.1111/j.1551-2916.2010.04267.x ↗
13. Le · J. Power Sources · 2010 · 195 · 264410.1016/j.jpowsour.2009.11.039 ↗
14. Qiao · J. Power Sources · 2007 · 169 · 25310.1016/j.jpowsour.2007.03.006 ↗
15. Yang · J. Am. Ceram. Soc. · 2010 · 93 · 293510.1111/j.1551-2916.2010.03905.x ↗
16. Ghosh · J. Am. Ceram. Soc. · 2009 · 92 · 185610.1111/j.1551-2916.2009.03102.x ↗
17. Hwang · J. Am. Ceram. Soc. · 1990 · 73 · 326910.1111/j.1151-2916.1990.tb06449.x ↗
18. Han · J. Am. Ceram. Soc. · 1993 · 76 · 53810.1111/j.1151-2916.1993.tb06629.x ↗
19. Chaim · Mater. Sci. Eng. A · 2008 · 486 · 43910.1016/j.msea.2007.09.022 ↗
20. Grasso · J. Ceram. Soc. Jpn. · 2011 · 119 · 14410.2109/jcersj2.119.144 ↗
21. Conrad · J. Am. Ceram. Soc. · 2011 · 94 · 364110.1111/j.1551-2916.2011.04823.x ↗
22. Cologna · J. Am. Ceram. Soc. · 2011 · 94 · 39110.1111/j.1551-2916.2010.04088.x ↗
23. Zhou · J. Power Sources · 2009 · 191 · 52810.1016/j.jpowsour.2009.02.008 ↗
24. Han · Solid State Ionics · 2008 · 179 · 154510.1016/j.ssi.2008.02.035 ↗
25. Wang · J. Membr. Sci. · 2008 · 320 · 50010.1016/j.memsci.2008.04.038 ↗
26. Le · J. Power Sources · 2010 · 195 · 264410.1016/j.jpowsour.2009.11.039 ↗
27. Wang · J. Solid State Electrochem. · 2010 · 14 · 63710.1007/s10008-009-0832-3 ↗
28. Zhang · J. Am. Ceram. Soc. · 2006 · 89 · 230410.1111/j.1551-2916.2006.00980.x ↗
29. Maier · Solid State Ionics · 2004 · 175 · 710.1016/j.ssi.2004.09.051 ↗
30. Han · J. Power Sources · 2007 · 165 · 75710.1016/j.jpowsour.2006.11.054 ↗