journal article·2024-02Open access

The effect of using alternative binders and second life graphite materials on the electrochemical performance of lithium-ion battery electrodes

Sean Scott, Priyanka Mukherjee, Chunhong Lei, Jennifer M. Hartley, Andrew P. Abbott, Karl S. Ryder

Abstract

Lithium-ion battery anodes were produced and tested using gelatin and sodium alginate (NaAlg) biopolymers, modified with a deep eutectic solvent (DES). Anodes created with these alternative binder systems showed comparable capacities and Coulombic efficiencies to cells assembled using commercial PVDF and CMC/SBR binders. Rate tests of these cells found that DES-NaAlg possessed a higher rate capability than PVDF, showing a greater capacity (∼70 mAh.g−1 higher) when cycled at 1C. Anodes using gelatin materials exhibited lower rate stability, showing significant capacity fade at cycling rates <0.5C. EIS measurements showed that NaAlg anodes were similar to the cells using conventional binders, but gelatin possessed an extra impedance contribution relating to a polymeric coating of the graphite active materials. NaAlg binders were incorporated into graphite anodes reclaimed from a commercial pouch cell using an ultrasound delamination technique. These cells showed reduced rate performance, brought about by ultrasonic fracturing and particle agglomeration. The capacities at low cycling rates were, however, comparable to pristine materials and evidence of key processes such as SEI formation were observed.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Extraction and Separation Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. 2014
2. The EV revolution: the road ahead for critical raw materials demand10.1016/j.apenergy.2020.115072 ↗
3. Recycling lithium-ion batteries from electric vehicles10.1038/s41586-019-1682-5 ↗
4. Lithium-ion battery Recycling─Overview of techniques and trends10.1021/acsenergylett.1c02602 ↗
5. Sojka · 2020 · 1
6. To shred or not to shred: a comparative techno-economic assessment of lithium ion battery hydrometallurgical recycling retaining value and improving circularity in LIB supply chains10.1016/j.resconrec.2021.105741 ↗
7. Disassembly automation for recycling end-of-life lithium-ion pouch cells10.1007/s11837-019-03778-0 ↗
8. The importance of design in lithium ion battery recycling-a critical review10.1039/D0GC02745F ↗
9. Designing lithium-ion batteries for recycle : the role of adhesives10.1016/j.nxener.2023.100023 ↗
10. Breaking it down: a techno-economic assessment of the impact of battery pack design on disassembly costs10.1016/j.apenergy.2022.120437 ↗
11. Lithium ion battery recycling using high-intensity ultrasonication10.1039/D1GC01623G ↗
12. Gelatin and alginate binders for simplified battery recycling10.1021/acs.jpcc.2c01282 ↗
13. Novel solvent properties of choline chloride/urea mixtures10.1039/b210714g ↗
14. Processing of metals and metal oxides using ionic liquids10.1039/c0gc00716a ↗
15. Effect of porosity on electrochemical and mechanical properties of composite Li-ion anodes10.1177/0021998314568653 ↗
16. The state of understanding of the lithium-ion-battery graphite solid electrolyte interphase (SEI) and its relationship to formation cycling10.1016/j.carbon.2016.04.008 ↗
17. Fast formation cycling for lithium ion batteries10.1016/j.jpowsour.2017.01.011 ↗
18. Generation and evolution of the solid electrolyte interphase of lithium-ion batteries10.1016/j.joule.2019.08.018 ↗
19. Half-cell cumulative efficiency forecasts full-cell capacity retention in lithium-ion batteries10.1021/acsenergylett.1c00173 ↗
20. Moving beyond 99.9% Coulombic efficiency for lithium anodes in liquid electrolytes10.1038/s41560-021-00910-w ↗
21. Estimating lithium-ion battery behavior from half-cell data10.1016/j.egyr.2021.02.048 ↗
22. Identifying the limiting electrode in lithium ion batteries for extreme fast charging10.1016/j.elecom.2018.10.007 ↗
23. The success story of graphite as a lithium-ion anode material-fundamentals, remaining challenges, and recent developments including silicon (oxide) composites10.1039/D0SE00175A ↗
24. Phase diagram of LixC610.1103/PhysRevB.44.9170 ↗
25. Nonaqueous liquid electrolytes for lithium-based rechargeable batteries10.1021/cr030203g ↗
26. Safer electrolytes for lithium-ion batteries: state of the art and perspectives10.1002/cssc.201500284 ↗
27. High rate capability of graphite negative electrodes for lithium-ion batteries10.1149/1.1851055 ↗
28. Effect of particle size on lithium intercalation rates in natural graphite10.1016/S0378-7753(01)00853-9 ↗
29. Graphitized carbons of variable morphology and crystallinity: a comparative study of their performance in lithium cells10.1149/1.3231489 ↗
30. Solvated Li-ion transfer at interface between graphite and electrolyte10.1149/1.1763141 ↗
31. Asymmetric temperature modulation for extreme fast charging of lithium-ion batteries10.1016/j.joule.2019.09.021 ↗
32. Factors limiting Li + charge transfer kinetics in Li-ion batteries10.1149/2.1221802jes ↗
33. Lithium diffusion in graphitic carbon10.1021/jz100188d ↗
34. Glycerol as a binder additive for low-resistance graphite anodes in lithium-ion batteries10.1149/1945-7111/ac6837 ↗
35. Direct observation of carboxymethyl cellulose and styrene-butadiene rubber binder distribution in practical graphite anodes for Li-ion batteries10.1021/acsami.9b13803 ↗
36. Inhomogeneous degradation of graphite anodes in automotive lithium ion batteries under low-temperature pulse cycling conditions10.1016/j.jpowsour.2016.01.033 ↗
37. A short review of failure mechanisms of lithium metal and lithiated graphite anodes in liquid electrolyte solutions10.1016/S0167-2738(02)00080-2 ↗
38. Influence of binder on impedance of lithium batteries: a mini-review10.1007/s42835-021-00936-w ↗
39. Comparative study of water-based LA133 and CMC/SBR binders for sulfur cathode in advanced lithium-sulfur batteries10.1021/acs.jpcc.8b10736 ↗
40. Characterisation of batteries by electrochemical impedance spectroscopy10.1016/j.egyr.2020.03.029 ↗
41. Modeling and applications of electrochemical impedance spectroscopy (Eis) for lithium-ion batteries10.33961/jecst.2019.00528 ↗
42. Preparation of an amorphous cross-linked binder for silicon anodes10.1002/cssc.201902079 ↗
43. Glycerol-crosslinked PEDOT:PSS as bifunctional binder for Si anodes: improved interfacial compatibility and conductivity10.1016/j.jcis.2020.01.028 ↗
44. High-rate performance of LiFe0.4Mn0.6PO4 cathode materials with poly(3,4-ethylenedioxythiopene):poly(styrene sulfonate)/carboxymethylcellulose10.1016/j.matlet.2016.04.106 ↗
45. Silicon/graphite composites as an anode material for lithium ion batteries10.1016/j.jpowsour.2005.12.078 ↗