journal article·2023-10

Effect of perfluorosulfonic acid ionomer in anode catalyst layer on proton exchange membrane water electrolyzer performance

Congfan Zhao, Shu Yuan, Xiaojing Cheng, Lu An, Jiazhen Li, Shuiyun Shen, Jiewei Yin, Xiaohui Yan, Junliang Zhang

Publisher page

Abstract

The equivalent weight (EW) and side-chain length of perfluorosulfonic acid (PFSA) ionomers have been found to significantly influence the performance of different proton exchange membrane (PEM)-based electrochemical devices. However, few reports have investigated their influence on PEM water electrolyzers (PEMWE). In this study, we investigate the influence of EW and side-chain length on PEMWE`s membrane electrode assemblies (MEAs) which are fabricated by four different PFSA ionomers. It is found that the change in PFSA ionomer EWs barely influences the microstructure of the anode catalyst layer (ACL) but affects its surface wettability and MEA performance. Different from that in PEM fuel cells, MEA in PEMWEs prepared by PFSA ionomers with higher EWs shows better cell performance. The voltage difference comes from the change in the mass transport overpotential which is up to 113 mV with the comparison between PFSA ionomers with the highest EW and the lowest EW, which attributes to the changed wettability and water-oxygen transport of the ACLs. The influence of PFSA ionomer side-chain lengths on cell performance is not observed. This work provides insight into the effect of PFSA ionomers and offers information on how to design high-performance PFSA ionomers for PEMWE applications.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Hybrid Renewable Energy Systems · Hydrogen Storage and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Water electrolysis10.1038/s43586-022-00164-0 ↗
2. Hydrogen-storage materials for mobile applications10.1038/35104634 ↗
3. PEM Fuel cell and electrolysis cell technologies and hydrogen infrastructure development – a review10.1039/D2EE00790H ↗
4. A comprehensive review on PEM water electrolysis10.1016/j.ijhydene.2013.01.151 ↗
5. A systemic review of hydrogen supply chain in energy transition10.1007/s11708-023-0861-0 ↗
6. Non-iridium-based electrocatalyst for durable acidic oxygen evolution reaction in proton exchange membrane water electrolysis10.1038/s41563-022-01380-5 ↗
7. Active and durable R2MnRuO7 pyrochlores with low Ru content for acidic oxygen evolution
8. A functionally stable RuMn electrocatalyst for oxygen evolution reaction in acid10.1002/adfm.202200131 ↗
9. Nickel-based metal-organic framework-derived bifunctional electrocatalysts for hydrogen and oxygen evolution reactions10.3866/PKU.WHXB202009054 ↗
10. Recent progress of non-noble metal catalysts in water electrolysis for hydrogen production10.3866/PKU.WHXB201604291 ↗
11. Research progress of nickel-based metal-organic frameworks and their derivatives for oxygen evolution catalysis10.3866/PKU.WHXB202009074 ↗
12. The effects of ionomer content on PEM water electrolyser membrane electrode assembly performance10.1016/j.ijhydene.2010.08.055 ↗
13. Improving the water electrolysis performance by manipulating the generated nano/micro-bubbles using surfactants
14. Bubble evolution and transport in PEM water electrolysis: mechanism, impact, and management10.1016/j.pecs.2023.101075 ↗
15. Investigation of the microstructure and rheology of iridium oxide catalyst inks for low-temperature polymer electrolyte membrane water electrolyzers10.1021/acsami.9b14415 ↗
16. Three-dimensional microstructure analysis of a polymer electrolyte membrane water electrolyzer anode | Elsevier Enhanced Reader n.d. https://doi.org/10.1016/j.jpowsour.2018.04.089.10.1016/j.jpowsour.2018.04.089 ↗
17. Investigation of the correlation effects of catalyst loading and ionomer content in an anode electrode on the performance of polymer electrode membrane water electrolysis10.1016/j.ijhydene.2022.04.019 ↗
18. Influence of ionomer content in IrO 2/TiO 2 electrodes on PEM water electrolyzer performance10.1149/2.0231611jes ↗
19. New insights into perfluorinated sulfonic-acid ionomers10.1021/acs.chemrev.6b00159 ↗
20. Editors' choice—ionomer side chain length and equivalent weight impact on high current density transport resistances in PEMFC cathodes10.1149/1945-7111/abe5eb ↗
21. Effect of ionomer dispersions on the performance of catalyst layers in proton exchange membrane fuel cells10.1016/j.electacta.2022.140680 ↗
22. Nanostructure/swelling relationships of bulk and thin-film PFSA ionomers10.1002/adfm.201600861 ↗
23. Effect of cobalt ion contamination on proton conduction of ultrathin Nafion film10.1016/j.ijhydene.2020.06.205 ↗
24. Bridging the gap between highly active oxygen reduction reaction catalysts and effective catalyst layers for proton exchange membrane fuel cells10.1038/s41560-021-00824-7 ↗
25. Effects of short-side-chain perfluorosulfonic acid ionomers as binders on the performance of low Pt loading fuel cell cathodes10.1016/j.jpowsour.2014.10.149 ↗
26. Degradations in the surface wettability and gas permeability characteristics of proton exchange membrane fuel cell electrodes under freeze-thaw cycles: effects of ionomer type10.1016/j.ijhydene.2018.11.184 ↗
27. Effect of carbon corrosion on wettability of PEM fuel cell electrodes10.1149/2.0231912jes ↗
28. Extending conventional surface roughness ISO parameters using topological data analysis for shot peened surfaces10.1038/s41598-022-09551-9 ↗
29. Mercury intrusion porosimetry in concrete technology: tips in measurement, pore structure parameter acquisition and application10.1007/s10934-013-9765-4 ↗
30. Pore structure evolution during lean-oxygen combustion of pyrolyzed residual from low-rank coal and its effect on internal oxygen diffusion mechanism10.1016/j.fuel.2022.123850 ↗
31. Bubble management in PEM water electrolysis via imprinting patterned grooves on catalyst layer10.1016/j.ijheatmasstransfer.2023.124249 ↗
32. The role of electrode wettability in electrochemical reduction of carbon dioxide10.1039/D1TA03636J ↗
33. Insight from molecular modelling: does the polymer side chain length matter for transport properties of perfluorosulfonic acid membranes?10.1039/c2cp24132c ↗
34. Superwettability of gas bubbles and its application: from bioinspiration to advanced materials10.1002/adma.201703053 ↗
35. Superwetting electrodes for gas-involving electrocatalysis10.1021/acs.accounts.8b00070 ↗
36. Contact angle measurement of free-standing square-millimeter single-layer graphene10.1038/s41467-018-06608-0 ↗
37. Effects of various parameters of different porous transport layers in proton exchange membrane water electrolysis10.1016/j.electacta.2020.136641 ↗
38. Optimisation of mass transport parameters in a polymer electrolyte membrane electrolyser using factorial design-of-experiment10.3389/fenrg.2021.643587 ↗
39. Porous transport layers for proton exchange membrane electrolysis under extreme conditions of current density, temperature, and pressure
40. Measurement of the protonic and electronic conductivities of PEM water electrolyzer electrodes10.1021/acsami.0c12111 ↗
41. Local current density and electrochemical impedance measurements within 50 cm single-channel PEM electrolysis cell10.1149/2.0411816jes ↗
42. Effects of the transport/catalyst layer interface and catalyst loading on mass and charge transport phenomena in polymer electrolyte membrane water electrolysis devices10.1149/1945-7111/ab7f87 ↗
43. Towards a generic understanding of oxygen evolution reaction kinetics in polymer electrolyte water electrolysis10.1039/D0EE00673D ↗
44. Highly efficient oxygen evolution reaction via facile bubble transport realized by three-dimensionally stack-printed catalysts10.1038/s41467-020-18686-0 ↗
45. Influence of iridium oxide loadings on the performance of PEM water electrolysis cells: Part I–Pure IrO2-based anodes10.1016/j.apcatb.2015.09.013 ↗
46. The effect of catalyst layer design on catalyst utilization in PEMFC studied via stochastic reconstruction method10.1016/j.egyai.2023.100245 ↗
47. Influence of bubbles on the energy conversion efficiency of electrochemical reactors10.1016/j.joule.2020.01.005 ↗
48. Bubble growth and departure modes on wettable/non-wettable porous foams in alkaline water splitting10.1016/j.joule.2021.02.015 ↗
49. Fernan · 2014 · vol. 10
50. Gas bubble evolution on microstructured silicon substrates10.1039/C8EE02657B ↗
51. Gas bubbles in electrochemical gas evolution reactions10.1021/acs.langmuir.9b00119 ↗
52. Influence of equivalent weight of ionomer on proton conduction behavior in fuel cell catalyst layers10.1149/2.0451912jes ↗
53. Proton conduction in PEM fuel cell cathodes: effects of electrode thickness and ionomer equivalent weight10.1149/1.3435323 ↗
54. Rotating disk electrode standardization and best practices in acidic oxygen evolution for low-temperature electrolysis10.3389/fenrg.2022.857663 ↗
55. Electrochemical impedance spectroscopy of oxygen reduction reaction (ORR) in a rotating disk electrode configuration: effect of ionomer content and carbon-support10.1149/2.0141506jes ↗
56. Electrochemical characteristics of cobaltosic oxide in organic electrolyte according to Bode plots: double-layer capacitance and pseudocapacitance10.1002/celc.201900289 ↗
57. Oxygen reduction reaction kinetics and mechanism on platinum nanoparticles inside Nafion10.1016/S0022-0728(00)00492-7 ↗
58. Impedance study of the oxygen reduction reaction on platinum nanoparticles in alkaline media10.1016/S0013-4686(03)00525-5 ↗
59. Capabilities and limitations of rotating disk electrodes versus membrane electrode assemblies in the investigation of electrocatalysts10.1038/s41929-022-00776-5 ↗
60. Effects of both oxygen permeability and ion exchange capacity for cathode ionomers on the performance and durability of polymer electrolyte fuel cells10.1149/2.0071806jes ↗
61. Existence of dissolved oxygen near anode catalyst in proton exchange membrane water electrolyzers10.1149/1945-7111/ac6392 ↗