journal article·2023-08Open access

Effect of voltage elevation on cost and energy efficiency of power electronics in water electrolyzers

Galdi Hysa, Vesa Ruuskanen, Antti Kosonen, Markku Niemelä, Lassi Aarniovuori, Damien Guilbert, Jero Ahola

Abstract

The interest in green hydrogen has been increasing in recent years for several applications, such as energy storage and different industrial sectors. The green hydrogen is produced from water electrolysis supplied by renewable electricity. The operation of industrial large-scale water electrolysis is characterized by a high DC current in the kiloampere range and a few hundred volts. Therefore, the rectifier unit plays an important role in converting AC current of the electricity grid into DC current supplied to the electrolyzer. The power electronic converters are also considered as one of the main cost components of the water electrolyzer system. The objective of this paper is to study whether the operation at a higher voltage than typical values (200 V–300 V) can be beneficial both for the cost and energy efficiency of the power converters in water electrolyzer systems. In this study, three different rectifier topologies considered for an industrial-scale electrolyzer are analyzed and compared in terms of energy efficiency and cost. The simulation models of each topology are carried out in the Matlab/Simulink environment.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Hybrid Renewable Energy Systems · Advanced Battery Technologies Research · Energy and Environment Impacts

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Static–dynamic modelling of the electrical behaviour of a commercial advanced alkaline water electrolyser10.1016/j.ijhydene.2012.09.125 ↗
2. Current status of water electrolysis for energy storage, grid balancing and sector coupling via power-to-gas and power-to-liquids: A review10.1016/j.rser.2017.09.003 ↗
3. Hydrogen energy — Abundant, efficient, clean: A debate over the energy-system-of-change10.1016/j.ijhydene.2009.05.063 ↗
4. AC-DC converters for electrolyzer applications: State of the art and future challenges10.3390/electronics9060912 ↗
5. Power quality estimation of water electrolyzers based on current and voltage measurements10.1016/j.jpowsour.2019.227603 ↗
6. Influence of the power supply on the energy efficiency of an alkaline water electrolyser10.1016/j.ijhydene.2009.02.017 ↗
7. Comparison of Thyristor-Rectifier with hybrid filter and Chopper- Rectifier for high-power, high-current application
8. Influence of rectifiers on the energy demand and gas quality of alkaline electrolysis systems in dynamic operation10.1016/j.apenergy.2019.05.014 ↗
9. Overview of power electronic converter topologies enabling large-scale hydrogen production via water electrolysis10.3390/app12041906 ↗
10. Cost forecast for low-temperature electrolysis - technology driven bottom-up prognosis for PEM and alkaline water electrolysis systems
11. Power quality improvement for 20 MW PEM water electrolysis system10.1016/j.ijhydene.2022.08.073 ↗
12. DC-bus voltage range extension in 1500 V photovoltaic inverters10.1109/JESTPE.2015.2445735 ↗
13. Power up with 800-V systems: The benefits of upgrading voltage power for battery-electric passenger vehicles10.1109/MELE.2016.2644560 ↗
14. Specifying DC chopper systems for electrochemical applications10.1109/28.924779 ↗
15. Large current rectifiers: State of the art and future trends10.1109/TIE.2005.843949 ↗
16. Comparison of thyristor and insulated-gate bipolar transistor -based power supply topologies in industrial water electrolysis applications10.1016/j.jpowsour.2020.229443 ↗
17. Prediction of shunt currents in a bipolar electrolyzer stack by difference calculus10.1007/s10800-007-9330-4 ↗
18. Dynamic energy and mass balance model for an industrial alkaline water electrolyzer plant process10.1016/j.ijhydene.2021.11.126 ↗
19. High-current variable-voltage rectifiers: state of the art topologies10.1049/iet-pel.2014.0533 ↗
20. On the efficiency and reliability of high-current rectifiers
21. Control of a three-phase current source rectifier for H2 storage applications in AC microgrids10.3390/en15072436 ↗
22. Ultrashort pulse laser-structured nickel surfaces as hydrogen evolution electrodes for alkaline water electrolysis10.1016/j.ijhydene.2017.02.006 ↗
23. Spark-plasma-sintered porous electrodes for efficient oxygen evolution in alkaline water electrolysis10.1016/j.electacta.2019.05.102 ↗
24. Semiconductor losses in voltage source and current source IGBT converters based on analytical derivation
25. Design and application of semiconductor rectifier transformers10.1109/TIA.2002.800595 ↗
26. COMMISSION REGULATION (EU) No 548/2014 - of 21 May 2014 - on implementing directive 2009/125/EC of the European parliament and of the council with regard to small, medium and large power transformers
27. Performance and cost comparison of NPC, FC and SCHB multilevel converter topologies for high-voltage applications
28. A transformer-less compact and light wind turbine generating system for offshore wind farms