journal article·2023-03Open access

Effect of dispersant on catalyst ink properties and catalyst layer structure for high performance polymer electrolyte membrane fuel cells

Soonyong So, Keun-Hwan Oh

Abstract

Here, catalyst ink is prepared using a dispersant with the hydrophile-lipophile balance (HLB) value of 17. The effects of the ionomer-catalyst agglomerate size on the ink rheological properties, and subsequent catalyst layer (CL) microstructure and electrochemical performance are investigated to elucidate the relationship between ink properties and cell performance. Results shows that the smallest agglomerate size (2.7 μm) and polydispersity index (PDI, 0.068) are obtained with 1 wt% dispersant content; the low PDI indicate that the ink is well dispersed. Steady-state and thixotropy tests also show that the ink has shear-thinning and gel-like behavior (Recovery ratio: 30.4%). It is proposed that this occurs because the agglomerates are smaller and the interaction forces between them increase. Thus, the ink structure is maintained until the dried CL is formed, and as a result, the pore volume of CL with 1 wt% dispersant is increased compared to those with 0 and 9 wt%. In addition, the 1 wt% CL-based MEA shows the highest performance (1224.4 mA cm−2 at 100% RH) owing the increase in the number of channels (1190 mA cm−2 in four-channel) and back pressure (1240 mA cm−2 at 1.5 barca).
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Effects of membrane electrode assembly preparation on the polymer electrolyte membrane fuel cell performance10.1016/j.electacta.2004.07.017 ↗
2. The triple phase boundary: a mathematical model and experimental investigations for fuel cells10.1149/1.1851054 ↗
3. The air/platinum/nafion triple-phase boundary: characteristics, scaling, and implications for fuel cells10.1149/1.1701868 ↗
4. Effects of microstructure of carbon support in the catalyst layer on the performance of polymer-electrolyte fuel cells10.1149/1.1836988 ↗
5. PEMFC catalyst layers: the role of micropores and mesopores on water sorption and fuel cell activity10.1021/am200590w ↗
6. Analysis of oxygen-transport diffusion resistance in proton-exchange-membrane fuel cells10.1149/1.3546038 ↗
7. Impact of platinum loading and catalyst layer structure on PEMFC performance10.1149/2.072308jes ↗
8. Partially perfluorinated hydrocarbon ionomer for cathode catalyst layer of polymer electrolyte membrane fuel cell10.1016/j.electacta.2014.01.116 ↗
9. PEMFC electrode preparation: influence of the solvent composition and evaporation rate on the catalytic layer microstructure10.1016/j.jpowsour.2005.02.048 ↗
10. New preparation method for polymer-electrolyte fuel cells10.1149/1.2044068 ↗
11. Impact of catalyst ink dispersing solvent on PEM fuel cell performance and durability10.1149/1945-7111/abf2b0 ↗
12. Effects of ink formulation on construction of catalyst layers for high-performance polymer electrolyte membrane fuel cells10.1021/acsami.1c06711 ↗
13. Enhancement of service life of polymer electrolyte fuel cells through application of nanodispersed ionomer10.1126/sciadv.aaw0870 ↗
14. Ink solvent dependence of the ionomer distribution in the catalyst layer of a PEMFC10.1149/2.1251814jes ↗
15. The effect of solvent and ionomer on agglomeration in fuel cell catalyst inks: simulation by the Discrete Element Method10.1016/j.ijhydene.2019.09.012 ↗
16. Investigation of the microstructure in the catalyst layer and effects of both perfluorosulfonate ionomer and PTFE-loaded carbon on the catalyst layer of polymer electrolyte fuel cells10.1149/1.2048477 ↗
17. Pore scale simulation of transport and electrochemical reactions in reconstructed PEMFC catalyst layers10.1149/1.3478207 ↗
18. A hydrophobic blend binder for anti-water flooding of cathode catalyst layers in polymer electrolyte membrane fuel cells10.1016/j.ijhydene.2011.07.116 ↗
19. A comparative study of the hydrated morphologies of perfluorosulfonic acid fuel cell membranes with mesoscopic simulations10.1039/b809600g ↗
20. Understanding short-side-chain perfluorinated sulfonic acid and its application for high temperature polymer electrolyte membrane fuel cells10.1039/C3RA43735C ↗
21. Proton exchange membrane fuel cell from low temperature to high temperature: material challenges10.1016/j.jpowsour.2007.02.065 ↗
22. Recent developments in proton exchange membranes for fuel cells10.1039/b808149m ↗
23. Improving the mechanical murability of short-side-chain perfluorinated polymer electrolyte membranes by annealing and physical reinforcement10.1021/acsomega.9b02436 ↗
24. Hydrophile-lipophile balance (hlb) of fluorocarbon surfactants and its relation to the critical micelle concentration (cmc)10.1021/j100658a020 ↗
25. CMC, HLB, and effective chain length of surface-active anionic and cationic substances containing oxyethylene groups10.1016/0021-9797(76)90178-8 ↗
26. Factors determining emulsion type: hydrophile-Lipophile balance and beyond10.1016/0927-7757(94)02929-6 ↗
27. Occurrence and fate of TMDD in wastewater treatment plants in Germany10.1016/j.watres.2011.07.038 ↗
28. Ultrasound assisted preparation of stable water-based nanocrystalline TiO2 suspensions for photocatalytic applications of inkjet-printed films10.1016/j.apcata.2011.10.020 ↗
29. Highly monodisperse, lanthanide-containing polystyrene nanoparticles as potential standard reference materials for environmental “Nano” fate analysis10.1002/app.42061 ↗
30. Effect of dispersion solvents and ionomers on the rheology of catalyst inks and catalyst layer structure for proton exchange membrane fuel cells10.1021/acsami.1c07070 ↗
31. Influence of the dispersion state of ionomer on the dispersion of catalyst ink and the construction of catalyst layer10.1016/j.ijhydene.2021.07.172 ↗
32. Effects of ionomer and dispersion methods on rheological behavior of proton exchange membrane fuel cell catalyst layer ink10.1016/j.ijhydene.2020.07.241 ↗
33. Rheological investigation on the microstructure of fuel cell catalyst inks10.1021/acsami.8b15039 ↗
34. Einstein's viscosity equation for nanolubricated friction10.1021/acs.langmuir.8b02861 ↗
35. Viscosity of suspensions and the einstein equation10.1038/145970a0 ↗
36. Effect of particle size distribution and shear rate on relative viscosity of concentrated suspensions10.1007/s00397-021-01301-4 ↗
37. Modeling the viscosity of polydisperse suspensions: improvements in prediction of limiting behavior10.1063/1.4953407 ↗
38. Analytically predicting the viscosity of hard sphere suspensions from the particle size distribution10.1016/j.jnnfm.2014.09.002 ↗
39. A rheological approach to studying process-induced structural evolution of the microporous layer in a proton exchange membrane fuel cell10.1016/j.electacta.2021.138690 ↗
40. Preparation of a novel ultra-high temperature low-damage fracturing fluid system using dynamic crosslinking strategy10.1016/j.cej.2018.08.021 ↗
41. Lightweight and tough nanocellular PP/PTFE nanocomposite foams with defect-free surfaces obtained using in situ nanofibrillation and nanocellular injection molding10.1016/j.cej.2018.05.161 ↗
42. Toward optimizing electrospun nanofiber fuel cell catalyst layers: polymer–particle interactions and spinnability10.1021/acsapm.0c01354 ↗
43. The role of oxygen-permeable ionomer for polymer electrolyte fuel cells10.1038/s41467-021-25301-3 ↗
44. Early-stage particle fragmentation behavior of a commercial silica-supported metallocene catalyst10.1039/D1CY00930C ↗
45. Pore-scale study of reactive transport processes in catalyst layer agglomerates of proton exchange membrane fuel cells10.1016/j.electacta.2019.03.158 ↗
46. Insight on Tafel slopes from a microkinetic analysis of aqueous electrocatalysis for energy conversion10.1038/srep13801 ↗
47. Tailoring catalyst layer structures for anion exchange membrane fuel cells by controlling the size of ionomer aggregates in dispersion10.1016/j.cej.2021.131737 ↗
48. A segmented cell approach for studying the effects of serpentine flow field parameters on PEMFC current distribution10.1016/j.electacta.2012.10.103 ↗