journal article·2022-11

Effects of geometric, structural and operational parameters on the thermal conductivity of lithium-ion cells

Luca Tendera, Dominik Wycisk, Carlos Gonzalez, Gerrit Karl Mertin, Hendrik Pegel, Kai Peter Birke

Publisher page

Abstract

The exact determination of input parameters for battery modeling has not yet been fully explored. Due to insufficient information about measurements under parametric influence in literature, a customized test stand for precisely measuring the cross-plane thermal conductivity of lithium-ion cells is developed. For the first time, non-commercially available automotive pouch cells with different geometry and structure are tested with varying pressure, state of charge and temperature. First-ever, precise information on the chemistry and the interior structure of the cells including layer thicknesses is available allowing for comparing measurement results to an analytical simulation. Hence, this work is based on experimental data and gives an extensive guideline for battery design and simulation. It is found that the influence of pressure on the thermal conductivity converges. The thermal conductivity linearly decreases over temperature whereby a parabolic slope of the SOC-dependent curve is recorded. All analyzed cells behave similarly, though having different absolute values. Since only a sparsely populated design of experiments is realized, found parametric effects require further validation. Finally, the comparison of the measurement results to the analytical model indicate that contact resistance only plays a subordinate role. However, the exact determination of active material and separator thermal conductivity remains challenging.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (97)

Show source-provided references
1. Possibilities and challenges for the inclusion of the electric vehicle (EV) to reduce the carbon footprint in the transport sector: A review10.3390/en13102602 ↗
2. The greenhouse gas emissions’ footprint and net energy ratio of utility-scale electro-chemical energy storage systems10.1016/j.enconman.2021.114497 ↗
3. Test method for thermal characterization of li-ion cells and verification of cooling concepts10.3390/batteries3010003 ↗
4. Effect of thermal contact resistances on fast charging of large format lithium ion batteries10.1016/j.electacta.2014.04.134 ↗
5. Experimental study on the influence of temperature and state-of-charge on the thermophysical properties of an LFP pouch cell10.1016/j.jpowsour.2015.05.084 ↗
6. A simplified fractional order impedance model and parameter identification method for lithium-ion batteries10.1371/journal.pone.0172424 ↗
7. Thermal modeling of large format lithium-ion cells10.1149/2.042302jes ↗
8. Optimal cell tab design and cooling strategy for cylindrical lithium-ion batteries10.1016/j.jpowsour.2021.229594 ↗
9. Three dimensional thermal-, electrical-, and electrochemical-coupled model for cylindrical wound large format lithium-ion batteries10.1016/j.jpowsour.2013.03.007 ↗
10. Modeling of a pouch lithium ion battery using a distributed parameter equivalent circuit for internal non-uniformity analysis10.3390/en9110865 ↗
11. Temperature rise in prismatic polymer lithium-ion batteries: An analytic approach10.4271/2012-01-0334 ↗
12. An advanced HIL simulation battery model for battery management system testing10.1109/TIA.2016.2585539 ↗
13. An advanced hardware-in-the-loop battery simulation platform for the experimental testing of battery management system
14. Measurement of anisotropic thermophysical properties of cylindrical Li-ion cells10.1016/j.jpowsour.2013.11.107 ↗
15. Thermal conductivity and internal temperature profiles of Li-ion secondary batteries10.1016/j.jpowsour.2017.05.045 ↗
16. Thermal parameters determination of battery cells by local heat flux measurements10.1016/j.jpowsour.2014.07.117 ↗
17. Simultaneous estimation of thermal parameters for large-format laminated lithium-ion batteries10.1016/j.jpowsour.2014.02.079 ↗
18. Evaluation of convective heat transfer coefficient and specific heat capacity of a lithium-ion battery using infrared camera and lumped capacitance method10.1016/j.jpowsour.2018.11.064 ↗
19. Quasi steady state method to measure thermophysical parameters of cylindrical lithium ion batteries10.1016/j.jpowsour.2020.229342 ↗
20. Experimental determination on thermal parameters of prismatic lithium ion battery cells10.1016/j.ijheatmasstransfer.2019.04.143 ↗
21. Thermal characterization of Li-ion cell electrodes by photothermal deflection spectroscopy10.1016/j.jpowsour.2016.05.082 ↗
22. Modeling of steady-state convective cooling of cylindrical Li-ion cells10.1016/j.jpowsour.2014.01.115 ↗
23. Methodology to determine the heat capacity of lithium-ion cells10.1016/j.jpowsour.2018.05.084 ↗
24. Li-Ion polymer cells thermal property changes as a function of cycle-life10.1016/j.jpowsour.2014.04.033 ↗
25. Heat transfer enhancement in a lithium-ion cell through improved material-level thermal transport10.1016/j.jpowsour.2015.09.028 ↗
26. Contact thermal resistance of Li-ion cell electrode stack10.1016/j.jpowsour.2003.11.006 ↗
27. Conjugate heat transfer analysis of thermal management of a li-ion battery pack
28. Experimental analysis and transient thermal modelling of a high capacity prismatic lithium-ion battery10.1016/j.icheatmasstransfer.2018.03.018 ↗
29. Electro-thermal modeling and experimental validation for lithium ion battery10.1016/j.jpowsour.2011.10.027 ↗
30. Research on thermo-physical properties identification and thermal analysis of EV Li-ion battery
31. Thermal analysis of lithium-ion batteries10.1016/j.jpowsour.2004.05.064 ↗
32. The impact of environmental factors on the thermal characteristic of a lithium–ion battery10.3390/batteries6010003 ↗
33. A review of thermal management for Li-ion batteries: Prospects, challenges, and issues10.1016/j.est.2021.102518 ↗
34. A Review on the Current Industrial Uses and the Future Outlook of Battery Thermal Management Systems for Electric Vehicles
35. Meta-analysis of experimental results for heat capacity and thermal conductivity in lithium-ion batteries: A critical review10.1016/j.jpowsour.2021.230829 ↗
36. Experimental and analytical study on heat generation characteristics of a lithium-ion power battery10.1016/j.ijheatmasstransfer.2018.02.038 ↗
37. Anisotropy - thermal conductivity tests of batteries
38. Thermal conductivity of insulations using guarded hot plates, including recent developments and sources of reference materials10.1088/0957-0233/12/12/201 ↗
39. ISO/TC 163/SC 1 Test and measurement methods, Thermal Insulation — Determination of Steady-State Thermal Resistance and Related Properties — Guarded Hot Plate Apparatus, ISO 8302:1991, 1991, URL.
40. Koch · 2019
41. Thermal conductivity inside prismatic lithium-ion cells with dependencies on temperature and external compression pressure10.1016/j.est.2020.101680 ↗
42. Thermal properties of lithium-ion battery and components10.1149/1.1391704 ↗
43. Todys · 2020
44. Gradient heat flux sensors
45. Heat flux based method for determination of thermal parameters of the cylindrical Li-ion battery: Uncertainty analysis
46. Determination of the through-plane thermal conductivity and specific heat capacity of a Li-ion cylindrical cell10.1016/j.ijheatmasstransfer.2020.120330 ↗
47. Analytical, numerical and experimental determination of thermophysical properties of commercial 18650 LiCoO 2 lithium-ion battery10.1149/2.0871514jes ↗
48. Thermal conductivity in aged li-ion cells under various compression conditions and state-of-charge10.3390/batteries7030042 ↗
49. Thermal conductivity, heat sources and temperature profiles of li-ion batteries10.1149/05848.0145ecst ↗
50. Ex situ measurements of through-plane thermal conductivities in a polymer electrolyte fuel cell10.1016/j.jpowsour.2009.06.077 ↗
51. Measurements of ageing and thermal conductivity in a secondary NMC-hard carbon Li-ion battery and the impact on internal temperature profiles10.1016/j.electacta.2017.07.173 ↗
52. Thermal conductivity of Li-ion batteries and their electrode configurations - A novel combination of modelling and experimental approach10.1016/j.jpowsour.2017.07.105 ↗
53. Predicting specific heat capacity and directional thermal conductivities of cylindrical lithium-ion batteries: A combined experimental and simulation framework10.1016/j.applthermaleng.2020.116075 ↗
54. Hot disk TPS 2500 S
55. Transient plane source techniques for thermal conductivity and thermal diffusivity measurements of solid materials10.1063/1.1142087 ↗
56. Theoretical accuracy of anisotropic thermal conductivity determined by transient plane source method10.1016/j.ijheatmasstransfer.2017.01.025 ↗
57. High thermal conductivity negative electrode material for lithium-ion batteries10.1016/S0378-7753(00)00661-3 ↗
58. Thermal Impedance Spectroscopy - A method for the thermal characterization of high power battery cells10.1016/j.jpowsour.2012.07.144 ↗
59. Low-effort determination of heat capacity and thermal conductivity for cylindrical 18650 and 21700 lithium-ion cells10.1016/j.est.2021.103065 ↗
60. Thermal characterization of large size lithium-ion pouch cell based on 1d electro-thermal model10.1016/j.jpowsour.2014.08.092 ↗
61. The battery: Sophisticated thermal management, 800-volt system voltage
62. Mercedes-benz reveals technical specs for EQS electric sedan
63. Hyundai ioniq 5 battery cells exposed
64. Audi e-tron – Battery and safety
65. Baehr · 2016
66. Wärmeleitfähigkeit
67. Flexen cold rubber continous plate
68. 3M thermally conductive silicone interface pad 5519
69. Keithley 2700 multimeter/data acquisition/switch systems
70. BaSyTec XCTS Mk II - Battery test and formation system
71. Multi-scale investigation of thickness changes in a commercial pouch type lithium-ion battery10.1016/j.est.2016.01.006 ↗
72. Reversible and irreversible dilation of lithium-ion battery electrodes investigated by in-situ dilatometry10.1016/j.jpowsour.2016.12.121 ↗
73. Electrochemical-mechanical coupled modeling and parameterization of swelling and ionic transport in lithium-ion batteries10.1016/j.jpowsour.2017.12.044 ↗
74. A new method for detecting lithium plating by measuring the cell thickness10.1016/j.jpowsour.2014.03.142 ↗
75. Venkateshan · 2022
76. Gaussian error propagation applied to ecological data: Post-ice-stormed-downed woody biomass10.1890/05-0030 ↗
77. Hand-held measuring device XP101 for reference temperature
78. Thermal conductivity measurements of float glass at high temperatures by needle probe method10.2109/jcersj.108.1256_381 ↗
79. Thermally enhanced pristine polyolefins: fundamentals, progress and prospective10.1016/j.jmrt.2020.07.101 ↗
80. Effects of mechanical compression on the aging and the expansion behavior of Si/C-composite|NMC811 in different lithium-ion battery cell formats10.1149/2.1121915jes ↗
81. Calendar aging and gas generation in commercial graphite/NMC-LMO lithium-ion pouch cell10.1149/2.0241714jes ↗
82. Gas evolution in operating lithium-ion batteries studied in situ by neutron imaging10.1038/srep15627 ↗
83. Dynamic measurement of the entropy coefficient for battery cells10.1016/j.est.2022.104361 ↗
84. On the possible influence of the Fermi–Dirac statistics on the potential and entropy of galvanic cells10.1016/j.jpowsour.2021.229870 ↗
85. Measurement of in-plane thermal conductivity and heat capacity of separator in Li-ion cells using a transient DC heating method10.1016/j.jpowsour.2014.08.066 ↗
86. Hust · 1984
87. Electro-thermal modeling of large format lithium-ion pouch cells: A cell temperature dependent linear polarization expression10.1149/2.0701614jes ↗
88. Thermal conductivity of polypropylene-based materials
89. Dimethyl carbonate as a green chemical10.1016/j.cogsc.2017.03.012 ↗
90. Novel low-temperature electrolyte for li-ion battery10.4028/www.scientific.net/AMR.287-290.1283 ↗
91. Volume and thickness change of NMC811 | SiO x -graphite large-format lithium-ion cells: from pouch cell to active material level10.1016/j.jpowsour.2022.231443 ↗
92. Anisotropic tuning of graphite thermal conductivity by lithium intercalation10.1021/acs.jpclett.6b02295 ↗
93. Identification and characterization of the dominant thermal resistance in lithium-ion batteries using operando 3-omega sensors10.1063/1.5134459 ↗
94. Thermal analysis of lithium polymer electrolyte batteries by a two dimensional model—thermal behaviour and design optimization10.1016/0013-4686(94)80095-2 ↗
95. Investigation of the effective thermal conductivity of cell stacks of li-ion batteries10.1002/ente.202000722 ↗
96. Three-dimensional thermal finite element modeling of lithium-ion battery in thermal abuse application10.1016/j.jpowsour.2009.10.090 ↗
97. Three-dimensional thermal modeling of a lithium-ion battery considering the combined effects of the electrical and thermal contact resistances between current collecting tab and lead wire