journal article·2022-02

Modeling and evaluating of thermo-electro-chemo-mechanical behavior for pre-reformed methane-fueled solid oxide fuel cell

Zheng Li, Guogang Yang, Daan Cui, Shian Li, Qiuwan Shen, Guoling Zhang, Hongpeng Zhang

Publisher page

Abstract

Catalyst deactivation and mechanical failure are the major obstacles to the commercial application of methane-fueled solid oxide fuel cells (SOFCs). While integrating SOFCs with methane pre-treating system is considered as an effective measure to improve its stability. Therefore, an integrated system of SOFCs and thermally self-sustained methane steam reformer (TS-MSR) is proposed in present work and a three-dimensional multi-physics model is developed to comprehensively evaluate its thermo-electro-chemo-mechanical behavior. The results show that the design of TS-MSR should be paid attention when conducting the integrated system to achieve the balance between cell performance and stability. An overdesigned TS-MSR would cause higher temperature, induce higher thermal stress and even break down the SOFCs. The corresponding maximum temperature reaches 1311 K and the resulting thermal stress reaches 669 MPa where the failure probability is close to 1. The mechanical failure is most likely to occur in the cathode porous electrode, despite the fact the highest stress exists in the electrolyte. This study makes up for the deficiency that previous literatures usually ignore the effect of pre-reformer design when conducting thermo-electro-chemo-mechanical analysis.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalysis and Oxidation Reactions · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Global warming changes tropical cyclone translation speed10.1038/s41467-019-13902-y ↗
2. 2020
3. 2021
4. Electrified methane reforming: a compact approach to greener industrial hydrogen production10.1126/science.aaw8775 ↗
5. Enhancing coking resistance of Ni/YSZ electrodes: in situ characterization, mechanism research and surface engineering10.1016/j.nanoen.2019.05.006 ↗
6. Controlling reformation rate for a more uniform temperature distribution in an internal methane steam reforming solid oxide fuel cell10.1016/j.jpowsour.2020.228310 ↗
7. Tailoring Ni-based catalyst by alloying with transition metals (M=Ni, Co, Cu, and Fe) for direct hydrocarbon utilization of energy conversion devices10.1016/j.electacta.2016.12.178 ↗
8. NiMo-ceria-zirconia catalytic reforming layer for solid oxide fuel cells running on a gasoline surrogate10.1016/j.apcatb.2017.10.067 ↗
9. Electrode design for direct-methane micro-tubular solid oxide fuel cell (MT-SOFC)10.1016/j.jpowsour.2018.03.002 ↗
10. CeO2Co3O4CuO anode for direct utilisation of methane or ethanol in solid oxide fuel cells10.1016/j.ijhydene.2018.01.192 ↗
11. Dry reforming of methane on Ni-Fe-MgO catalysts: influence of Fe on carbon-resistant property and kinetics10.1016/j.apcatb.2019.118497 ↗
12. Promotion of water-mediated carbon removal by nanostructured barium oxide/nickel interfaces in solid oxide fuel cells10.1038/ncomms1359 ↗
13. In situ probing of the mechanisms of coking resistance on catalyst-modified anodes for solid oxide fuel cells10.1021/cm503852v ↗
14. A rational design of FeNi alloy nanoparticles and carbonate-decorated perovskite as a highly active and coke-resistant anode for solid oxide fuel cells10.1016/j.cej.2021.132615 ↗
15. Coking-resistant NbOx-Ni-Ce0.8Sm0.2O1.9 anode material for methanol-fueled solid oxide fuel cells10.1016/j.ijhydene.2018.03.186 ↗
16. Utilization of low-concentration coal-bed gas to generate power using a core-shell catalyst-modified solid oxide fuel cell10.1016/j.renene.2019.09.023 ↗
17. A highly active Ni/Ce0.8Sm0.2O1.9 anode catalyst with a three-dimensionally ordered macroporous structure for solid oxide fuel cells10.1039/C9TA14034D ↗
18. Direct modeling of the electrochemistry in the three-phase boundary of solid oxide fuel cell anodes by density functional theory: a critical overview10.1039/C3CP53943A ↗
19. Stable direct-methane solid oxide fuel cells with calcium-oxide-modified nickel-based anodes operating at reduced temperatures10.1016/j.apenergy.2015.12.014 ↗
20. Key characteristics of a hydrocarbon-fueled solid oxide fuel cell examined by local thermodynamic states10.1016/j.enconman.2018.08.064 ↗
21. Three-dimensional numerical and experimental investigation of an industrial-sized SOFC fueled by diesel reformat – Part II: detailed reforming chemistry and carbon deposition analysis10.1016/j.ijhydene.2015.06.024 ↗
22. Modeling of thermal impacts in a single direct methane steam reforming solid oxide fuel cell10.1016/j.jpowsour.2020.228605 ↗
23. Development of a fuel feeder for a solid oxide fuel cell test station10.1002/er.3437 ↗
24. Effects of methane processing strategy on fuel composition, electrical and thermal efficiency of solid oxide fuel cell10.1016/j.ijhydene.2021.05.128 ↗
25. Design and analysis of compact hotbox for solid oxide fuel cell based 1kW-class power generation system10.1016/j.apenergy.2017.09.091 ↗
26. Thermodynamic analysis of fuel composition and effects of different dimethyl ether processing technologies on cell efficiency10.1016/j.fuproc.2020.106391 ↗
27. A comparison of steam reforming concepts in solid oxide fuel cell systems10.1016/j.apenergy.2020.114748 ↗
28. Numerical study on the mechanical stress and mechanical failure of planar solid oxide fuel cell10.1016/j.apenergy.2018.07.077 ↗
29. Reliability analysis of a multi-stack solid oxide fuel cell from a systems engineering perspective10.1016/j.ces.2021.116571 ↗
30. Thermo-electro-chemo-mechanical modeling of solid oxide fuel cell for stress and failure evolution during duty cycle10.1149/1945-7111/abf4ef ↗
31. Solid oxide fuel cell interconnect design optimization considering the thermal stresses10.1007/s11434-016-1146-3 ↗
32. Thermal stress analysis of a planar anode-supported solid oxide fuel cell: effects of anode porosity10.1016/j.ijhydene.2017.05.189 ↗
33. Thermal stress analysis of solid oxide fuel cells with chromium poisoning cathodes10.1149/2.1001814jes ↗
34. Residual stress analysis of a micro-tubular solid oxide fuel cell10.1016/j.ijhydene.2016.05.256 ↗
35. Mechanical durability of solid oxide fuel cell glass-ceramic sealant/steel interconnect joint under thermo-mechanical cycling10.1016/j.renene.2019.02.041 ↗
36. Chemo-thermo-mechanical coupling in protonic ceramic fuel cells from fabrication to operation10.1149/2.1071912jes ↗
37. Modeling and analysis of microchannel autothermal methane steam reformer focusing on thermal characteristic and thermo-mechanically induced stress behavior10.1016/j.ijhydene.2021.03.118 ↗
38. Modeling of an anode supported solid oxide fuel cell focusing on thermal stresses10.1016/j.ijhydene.2016.06.171 ↗
39. Continuum scale modelling and complementary experimentation of solid oxide cells10.1016/j.pecs.2020.100902 ↗
40. SOFC modeling considering electrochemical reactions at the active three phase boundaries10.1016/j.ijheatmasstransfer.2011.10.032 ↗
41. Numerical simulation of the performance of solid oxide fuel cell with different flow channel geometries10.1016/j.energy.2016.12.074 ↗
42. Modeling of a SOFC fuelled by methane: from direct internal reforming to gradual internal reforming10.1016/j.ces.2006.11.034 ↗
43. Modeling of solid oxide fuel cells with optimized interconnect designs10.1016/j.ijheatmasstransfer.2018.04.096 ↗
44. Effect of the electrochemical active site on thermal stress in solid oxide fuel cells10.1149/2.1341802jes ↗
45. A statistical distribution function of wide applicability10.1115/1.4010337 ↗
46. Thermal stress modeling of anode supported micro-tubular solid oxide fuel cell10.1016/j.jpowsour.2009.03.046 ↗
47. Achenbach · 1996
48. Comparison of humidified hydrogen and partly pre-reformed natural gas as fuel for solid oxide fuel cells applying computational fluid dynamics10.1016/j.ijheatmasstransfer.2014.06.033 ↗
49. Simulation of SOFC performance using a modified exchange current density for pre-reformed methane-based fuels10.1016/j.ijhydene.2019.12.089 ↗
50. Effects of pressurization and temperature on power generating characteristics and impedances of anode-supported and electrolyte-supported planar solid oxide fuel cells10.1016/j.jpowsour.2015.08.080 ↗
51. Performance degradation prediction of direct internal reforming solid oxide fuel cell due to Ni-particle coarsening in composite anode10.1016/j.enconman.2021.113902 ↗
52. 3D thermo-electro-chemo-mechanical coupled modeling of solid oxide fuel cell with double-sided cathodes10.1016/j.ijhydene.2019.10.139 ↗