Adaptive method for sensorless temperature estimation over the lifetime of lithium-ion batteries
Source abstract
Abstract
Over the last decade, several impedance-based temperature estimation methods for lithium-ion cells have been proposed in the literature. However, the influence of cell degradation on these methods is rarely considered. In this paper, we therefore investigate the influence of aging on the temperature estimation method, presented in our previous work, by tracking the capacity fade and resistance change of a 6s1p module over 200 cycles. Both capacity fade and resistance change were found to affect the accuracy of the temperature estimation method, leading to a root mean square error (RMSE) of up to 15 K without adaptation to cell aging. Fitting the reference used for temperature estimation with linear operations and a nonlinear least-squares solver (NLS) to the aging data proved to be a valid method of compensating for the effects of aging. Derived from the fitting results, an online applicable aging adjustment scheme based on the checkup values is proposed to maintain a stable temperature estimation over battery lifetime. Using a simple resistance offset correction and an accurate state of charge and health estimation, the temperature estimation error stabilizes at an average RMSE of below 2 K for each cell in the module over its entire lifetime.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Temperature dependent ageing mechanisms in lithium-ion batteries – A post-mortem study10.1016/j.jpowsour.2014.03.112 ↗
2. Correlation between capacity and impedance of lithium-ion cells during calendar and cycle life10.1016/j.jpowsour.2015.11.096 ↗
3. Analysis and modeling of calendar aging of a commercial LiFePO4/graphite cell10.1016/j.est.2018.01.019 ↗
4. Temperature effect and thermal impact in lithium-ion batteries: A review10.1016/j.pnsc.2018.11.002 ↗
5. Interaction of cyclic ageing at high-rate and low temperatures and safety in lithium-ion batteries10.1016/j.jpowsour.2014.08.135 ↗
6. Impact of cycling at low temperatures on the safety behavior of 18650-type lithium ion cells: Combined study of mechanical and thermal abuse testing accompanied by post-mortem analysis10.1016/j.jpowsour.2016.09.120 ↗
7. Instantaneous measurement of the internal temperature in lithium-ion rechargeable cells10.1016/j.electacta.2011.03.136 ↗
8. Monitoring dynamic thermal behavior of the carbon anode in a lithium-ion cell using a four-probe technique10.1016/j.jpowsour.2011.09.077 ↗
9. Measurement of the internal cell temperature via impedance: Evaluation and application of a new method10.1016/j.jpowsour.2013.06.013 ↗
10. Sensorless battery temperature measurements based on electrochemical impedance spectroscopy10.1016/j.jpowsour.2013.09.005 ↗
11. Battery internal temperature estimation by combined impedance and surface temperature measurement10.1016/j.jpowsour.2014.04.129 ↗
12. An improved impedance-based temperature estimation method for Li-ion10.1016/j.ifacol.2015.10.055 ↗
13. R. Koch, A. Jossen, Temperature Measurement of Large Format Pouch Cells with Impedance Spectroscopy, in: EVS28 International Electric Vehicle Symposium and Exhibition, 2015.
14. A new lithium-ion battery internal temperature on-line estimate method based on electrochemical impedance spectroscopy measurement10.1016/j.jpowsour.2014.10.182 ↗
15. Expanding the operational limits of the single-point impedance diagnostic for internal temperature monitoring of lithium-ion batteries10.1016/j.electacta.2015.06.003 ↗
16. Non-zero intercept frequency: An accurate method to determine the integral temperature of Li-ion batteries10.1109/TIE.2016.2516961 ↗
17. On-board monitoring of 2-D spatially-resolved temperatures in cylindrical lithium-ion batteries: Part II. State estimation via impedance-based temperature sensing10.1016/j.jpowsour.2016.06.104 ↗
18. Battery internal temperature estimation for LiFePO4 battery based on impedance phase shift under operating conditions10.3390/en10010060 ↗
19. Lithium-ion battery temperature on-line estimation based on fast impedance calculation10.1016/j.est.2019.100952 ↗
20. Towards impedance–based temperature estimation for Li–ion battery packs10.1002/er.5107 ↗
21. An enhanced online temperature estimation for lithium-ion batteries10.1109/TTE.2020.2980153 ↗
22. Temperature estimation from current and voltage measurements in lithium-ion battery systems10.1016/j.est.2020.102133 ↗
23. Pulse resistance based online temperature estimation for lithium-ion cells10.1016/j.jpowsour.2021.229523 ↗
24. Online aging determination in lithium-ion battery module with forced temperature gradient10.1016/j.est.2019.101170 ↗
25. Validation and benchmark methods for battery management system functionalities: State of charge estimation algorithms10.1016/j.est.2016.05.007 ↗
26. Modeling and simulation of inhomogeneities in a 18650 nickel-rich, silicon-graphite lithium-ion cell during fast charging10.1016/j.jpowsour.2018.11.043 ↗
27. Coupled thermal–electrochemical modelling of uneven heat generation in lithium-ion battery packs10.1016/j.jpowsour.2013.05.164 ↗
28. Research on the heat dissipation performance of battery pack based on forced air cooling10.1016/j.jpowsour.2013.03.004 ↗
29. Long-term equalization effects in Li-ion batteries due to local state of charge inhomogeneities and their impact on impedance measurements10.1016/j.electacta.2015.10.108 ↗
30. Enhanced coulomb counting method for estimating state-of-charge and state-of-health of lithium-ion batteries10.1016/j.apenergy.2008.11.021 ↗
31. Enhancement of the coulomb counter estimator by the on-board vehicle determination of battery initial state of charge10.3182/20120902-4-FR-2032.00109 ↗
32. Combined state of charge and state of health estimation over lithium-ion battery cell cycle lifespan for electric vehicles10.1016/j.jpowsour.2014.09.146 ↗
33. Accuracy improvement of SOC estimation in lithium-ion batteries10.1016/j.est.2016.03.003 ↗
34. Cell-to-cell variation of calendar aging and reversible self-discharge in 18650 nickel-rich, silicon–graphite lithium-ion cells10.1016/j.est.2019.100900 ↗
35. Comprehensive analysis of the aging behavior of nickel-rich, silicon-graphite lithium-ion cells subject to varying temperature and charging profiles10.1149/1945-7111/ac03f6 ↗
36. Systematic aging of commercial LiFePO 4 —Graphite cylindrical cells including a theory explaining rise of capacity during aging10.1016/j.jpowsour.2017.01.133 ↗
37. Experimental characterization of Li-ion battery resistance at the cell, module and pack level
38. Lithium plating in lithium-ion batteries investigated by voltage relaxation and in situ neutron diffraction10.1016/j.jpowsour.2016.12.032 ↗
39. Voltage relaxation and impedance spectroscopy as in-operando methods for the detection of lithium plating on graphitic anodes in commercial lithium-ion cells10.1016/j.jpowsour.2015.11.044 ↗
40. Experimental investigation of the lithium-ion battery impedance characteristic at various conditions and aging states and its influence on the application10.1016/j.apenergy.2012.09.030 ↗
41. Battery monitoring and electrical energy management10.1016/S0378-7753(02)00713-9 ↗
42. Statistical methods for research workers
43. A review of lithium-ion battery state of charge estimation and management system in electric vehicle applications: Challenges and recommendations10.1016/j.rser.2017.05.001 ↗
44. Data-driven state of charge estimation of lithium-ion batteries: Algorithms, implementation factors, limitations and future trends10.1016/j.jclepro.2020.124110 ↗
45. Classification, summarization and perspectives on state-of-charge estimation of lithium-ion batteries used in electric vehicles: A critical comprehensive survey10.1016/j.est.2021.102572 ↗
46. A review of state of health and remaining useful life estimation methods for lithium-ion battery in electric vehicles: Challenges and recommendations10.1016/j.jclepro.2018.09.065 ↗
47. A review of the state of health for lithium-ion batteries: Research status and suggestions10.1016/j.jclepro.2020.120813 ↗
48. Review on state-of-health of lithium-ion batteries: Characterizations, estimations and applications10.1016/j.jclepro.2021.128015 ↗
49. Methodology review: Estimation of population validity and cross-validity, and the use of equal weights in prediction10.1177/01466216970214001 ↗
50. The MathWorks, Inc. · 2021