Bubble-trap layer for effective removing gas bubbles and stabilizing power generation in direct liquid fuel cell
Source abstract
Abstract
Abstract The power generation property of direct liquid fuel cells at high current densities is plagued by gas bubbles generation. Herein, we propose a bubble-trap layer to help mitigate the problem and improve the power generation stability performance. A novel chip-based liquid fuel cell with the bubble-trap layer is fabricated as a facile visualization and fast test platform, validating that most of CO2 bubble releases from the bubble-trap layer in situ rather than at the microchannel outlet. The dynamic behaviors of gas bubbles are visualized and their impact on the power generation performance is discussed. It suggests the fuel cell equipped with the bubble-trap layer has superior power generation stability, power density (29 mW cm−2) and current density (163 mA cm−2), which are 10% and 27% higher than that without the bubble-trap layer. And a maximum power density of 35 mW cm−2 is achieved. The bubble growth and gas emission mechanisms are analyzed according to the mechanical model, providing a guidance for the channel design and operation condition determination of cells. These results demonstrate the viability of applying the bubble-trap layer for stabilizing power generation and cast new light on the structure design of direct liquid fuel cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Materials for production and storage of renewable energy10.1021/jz2000408 ↗
2. State of the art and perspectives in heterogeneous catalysis of CO2 hydrogenation to methanol10.1039/C9CS00614A ↗
3. Well-defined nanostructures for electrochemical energy conversion and storage
4. A direct alcohol fuel cell driven by an outer sphere positive electrode10.1021/acs.jpclett.7b01418 ↗
5. Multi-functional anodes boost the transient power and durability of proton Exchange membrane fuel cells10.1038/s41467-020-14822-y ↗
6. Aqueous proton-selective conduction across two-dimensional graphyne10.1038/s41467-019-09151-8 ↗
7. Efficient pH-Gradient-enabled microscale bipolar interfaces in direct borohydride fuel cells10.1038/s41560-019-0330-5 ↗
8. Superaerophobic electrodes for direct hydrazine fuel cells10.1002/adma.201500064 ↗
9. Materializing efficient methanol oxidation via electron delocalization in nickel hydroxide nanoribbon
10. Mesoporous decoration of freestanding palladium nanotube Arrays boosts the electrocatalysis capabilities toward formic acid and formate oxidation10.1002/aenm.201900955 ↗
11. Influence of bubbles on the energy conversion efficiency of electrochemical reactors10.1016/j.joule.2020.01.005 ↗
12. Superwetting electrodes for gas-involving electrocatalysis10.1021/acs.accounts.8b00070 ↗
13. Electrochemically controlled nucleation of single CO2 nanobubbles via formate oxidation at Pt nanoelectrodes10.1021/acs.jpclett.9b03898 ↗
14. Bubble behaviors and two-phase flow characteristics in single-serpentine sinusoidal corrugated channels of direct methanol fuel cell10.1016/j.jpowsour.2019.227621 ↗
15. Assessment of different bio-inspired flow fields for direct methanol fuel cells through 3D modeling and experimental studies10.1016/j.ijhydene.2017.06.073 ↗
16. Visualization of two-phase flow and temperature characteristics of an active liquid-feed direct methanol fuel cell with diverse flow fields10.1016/j.apenergy.2016.06.127 ↗
17. The whole process, bubble dynamic analysis in two-phase transport of the passive miniature direct methanol fuel cells10.1016/j.jpowsour.2019.01.088 ↗
18. Dynamic relationship between the CO2 gas bubble behavior and the pressure drop characteristics in the anode flow field of an active liquid-feed direct methanol fuel cell10.1016/j.apenergy.2016.12.040 ↗
19. Novel flow field with superhydrophobic gas channels prepared by one-step solvent-induced crystallization for micro direct methanol fuel cell10.1007/s40820-015-0032-x ↗
20. The performance analysis of direct methanol fuel cells with different hydrophobic anode channels10.1016/j.jpowsour.2010.06.033 ↗
21. A membrane-less electrolyzer for hydrogen production across the pH scale10.1039/C5EE00083A ↗
22. Laminar flow-based micro fuel cell utilizing grooved electrode surface10.1016/j.jpowsour.2014.06.005 ↗
23. Investigation of bubble effect in microfluidic fuel cells by a simplified microfluidic reactor10.1016/j.applthermaleng.2010.04.029 ↗
24. Air-breathing direct formic acid microfluidic fuel cell with an array of cylinder anodes10.1016/j.jpowsour.2013.08.119 ↗
25. Two-phase computational modelling of a membraneless microfluidic fuel cell with a flow-through porous anode10.1016/j.jpowsour.2019.02.081 ↗
26. Enhancing fuel transport in air-breathing microfluidic fuel cells by immersed fuel micro-jet10.1016/j.jpowsour.2019.227326 ↗
27. Bubble diameter on detachment in flowing liquids10.1016/0017-9310(81)90030-2 ↗
28. Studies on the motion of gas bubbles in liquids
29. Vapor bubble departure in forced-convection boiling10.1016/0017-9310(93)80041-R ↗
30. The life and death of "bare" viscous bubbles10.1126/science.279.5357.1704 ↗
31. Wettability of porous surfaces10.1039/tf9444000546 ↗
32. Growth and collapse of a vapor cavity near a free-surface10.1017/S0022112081002322 ↗
33. Lifetime of a two-dimensional air bubble10.1103/PhysRevE.76.060601 ↗
34. The influence of acting forces on the rupture mechanism of wetting films-nucleation or capillary waves10.1016/S0927-7757(01)00717-8 ↗
35. Bioinspired design of underwater superaerophobic and superaerophilic surfaces by femtosecond laser ablation for anti- or capturing bubbles10.1021/acsami.7b14819 ↗