A two-dimensional transient model for a zinc-cerium redox flow battery validated by extensive experimental data
Source abstract
Abstract
Abstract A two-dimensional transient model accounting for the charge, mass and momentum transport coupled with electrode kinetics is developed for zinc-cerium redox flow batteries (RFBs). The model is validated against an extensive set of experimental data obtained in our laboratory. This includes full-cell voltages, positive and negative electrode potentials monitored against reference electrodes inserted into the battery half-cell compartments and Ce(IV) concentrations in the positive electrolyte over 5 cycles. To the best of our knowledge, this is the most comprehensive set of experimental data used to fit and validate a flow battery model. The validated model is then used to predict the cell voltages and limiting redox reactions during battery operation for different model parameters to provide a guide to further improve the performance of zinc-cerium RFBs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced battery technologies research · Electrocatalysts for Energy Conversion · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Mitigation of climate change
2. Metal and metal oxide electrocatalysts for redox flow batteries10.1002/adfm.201910564 ↗
3. Redox flow cells for energy conversion10.1016/j.jpowsour.2006.02.095 ↗
4. Engineering aspects of the design, construction and performance of modular redox flow batteries for energy storage10.1016/j.est.2017.02.007 ↗
5. Redox flow batteries for energy storage: their promise, achievements and challenges10.1016/j.coelec.2019.05.007 ↗
6. A comparison between flow-through and flow-by porous electrodes for redox energy storage10.1016/0013-4686(81)87024-7 ↗
7. A mathematical model for the iron/chromium redox battery10.1149/1.2115676 ↗
8. A review of mathematical modeling of the zinc/bromine flow cell and battery10.1149/1.2100277 ↗
9. A mixed acid based vanadium–cerium redox flow battery with a zero-gap serpentine architecture10.1016/j.jpowsour.2014.10.034 ↗
10. The importance of key operational variables and electrolyte monitoring to the performance of an all vanadium redox flow battery10.1002/jctb.3870 ↗
11. A dynamic performance model for redox-flow batteries involving soluble species10.1016/j.electacta.2008.05.067 ↗
12. Non-isothermal modelling of the all-vanadium redox flow battery10.1016/j.electacta.2009.08.009 ↗
13. Dynamic modelling of hydrogen evolution effects in the all-vanadium redox flow battery10.1016/j.electacta.2009.10.022 ↗
14. Modelling the effects of oxygen evolution in the all-vanadium redox flow battery10.1016/j.electacta.2009.12.085 ↗
15. A transient vanadium flow battery model incorporating vanadium crossover and water transport through the membrane10.1149/2.017209jes ↗
16. A three-dimensional model for negative half cell of the vanadium redox flow battery10.1016/j.electacta.2011.09.042 ↗
17. Zero dimensional dynamic model of vanadium redox flow battery cell incorporating all modes of vanadium ions crossover10.1016/j.apenergy.2018.05.124 ↗
18. A vanadium redox flow battery model incorporating the effect of ion concentrations on ion mobility10.1016/j.apenergy.2015.08.028 ↗
19. A transient electrochemical model incorporating the Donnan effect for all-vanadium redox flow batteries10.1016/j.jpowsour.2015.08.100 ↗
20. A non-isothermal transient model for a metal-free quinone–bromide flow battery10.1016/j.electacta.2015.12.128 ↗
21. Modeling and simulation study of a metal free organic–inorganic aqueous flow battery with flow through electrode10.1016/j.electacta.2015.04.075 ↗
22. A two-dimensional model of the vanadium–cerium redox flow battery10.1016/j.electacta.2019.135019 ↗
23. Zinc deposition and dissolution in methanesulfonic acid onto a carbon composite electrode as the negative electrode reactions in a hybrid redox flow battery10.1016/j.electacta.2011.04.111 ↗
24. Electrodeposition and electrodissolution of zinc in mixed methanesulfonate-based electrolytes10.1016/j.electacta.2018.02.087 ↗
25. Evaluation of carbon composite materials for the negative electrode in the zinc–cerium redox flow cell10.1016/j.jpowsour.2011.01.036 ↗
26. The developments and challenges of cerium half-cell in zinc–cerium redox flow battery for energy storage10.1016/j.electacta.2012.12.066 ↗
27. Ce(III)/Ce(IV) in methanesulfonic acid as the positive half cell of a redox flow battery10.1016/j.electacta.2010.12.038 ↗
28. Cerium-zinc redox flow battery: Positive half-cell electrolyte studies10.1016/S1002-0721(10)60499-1 ↗
29. Mass transport and active area of porous Pt/Ti electrodes for the Zn-Ce redox flow battery determined from limiting current measurements10.1016/j.electacta.2016.10.097 ↗
30. The use of electrolyte redox potential to monitor the Ce (IV)/Ce (III) couple10.1016/j.jenvman.2007.07.007 ↗
31. In situ polarization study of zinc–cerium redox flow batteries10.1016/j.jpowsour.2020.228463 ↗
32. Improvement of zinc-cerium redox flow batteries using mixed methanesulfonate-chloride negative electrolyte10.1016/j.apenergy.2019.113894 ↗
33. Life-cycle analysis of zinc-cerium redox flow batteries10.1016/j.electacta.2020.136785 ↗
34. Characterization of a zinc–cerium flow battery10.1016/j.jpowsour.2011.01.095 ↗
35. Impact of electrolyte composition on the performance of the zinc–cerium redox flow battery system10.1016/j.jpowsour.2013.06.045 ↗
36. The development of Zn-Ce hybrid redox flow batteries for energy storage and their continuing challenges10.1002/cplu.201402103 ↗
37. The importance of cell geometry and electrolyte properties to the cell potential of Zn-Ce hybrid flow batteries10.1149/2.0261601jes ↗
38. The theory of membrane equilibria10.1021/cr60001a003 ↗
39. Pressure drop through platinized titanium porous electrodes for cerium-based redox flow batteries10.1002/aic.16000 ↗
40. Proton transfer and the mobilities of the H+ and OH− ions from studies of a dissociating model for water10.1063/1.3632990 ↗
41. Nikiforidis · 2012
42. Yaws · 2003
43. Ionic conductivity of an extruded nafion 1100 EW series of membranes10.1149/1.1517281 ↗
44. Parsons · 1959
45. The oxygen evolution reaction on platinum, iridium, ruthenium and their alloys at 80C in acid solutions10.1016/0013-4686(78)85030-0 ↗
46. An algebraic model for a zinc/bromine flow cell10.1149/1.2097226 ↗
47. Electrochemical investigations of the Ce(m)/Ce(IV) couple related to a Ce(IV)-assisted process for SO2/NOx abatement10.1007/BF00241592 ↗
48. A validated mathematical model for a zinc electrowinning cell10.1007/BF01023811 ↗
49. Anodic oxygen evolution reaction at high temperatures in acid solutions at platinum10.1016/0013-4686(94)85020-8 ↗
50. Standard electrode potentials and temperature coefficients in water at 298.15 K10.1063/1.555839 ↗
51. Mathematical model of a gas diffusion electrode bonded to a polymer electrolyte10.1002/aic.690370805 ↗
52. Carbon electrodes: Part 1. Hydrogen evolution in acidic solution10.1007/BF00615191 ↗
53. Impact of anode substrates on electrodeposited zinc over cycling in zinc-anode rechargeable alkaline batteries10.1016/j.electacta.2016.07.041 ↗
54. Voltage loss analysis of zinc-cerium redox flow batteries10.1149/MA2020-02453732mtgabs ↗
55. Vanadium-oxygen cell for positive electrolyte discharge in dual-circuit vanadium redox flow battery10.1016/j.jpowsour.2019.227075 ↗