journal article·2021-09

High-performance Ti and W co-doped indium oxide films for silicon heterojunction solar cells prepared by reactive plasma deposition

Wei Huang, Jianhua Shi, Yiyang Liu, Zhuopeng Wu, Fanying Meng, Zhengxin Liu

Publisher page

Abstract

Abstract Titanium and tungsten co-doped indium oxide (IWTO) films are deposited via low-damage reactive plasma deposition technique at room temperature (RT) and heating temperature (HT). The effects of oxygen flow rates (FO2) on the structural, optical and electrical properties of the IWTO films are investigated after air annealing. X-ray diffraction and scanning electron microscopy results show that the IWTO films are polycrystalline structure exhibiting a preferred (222) crystal plane orientation. As FO2 increases from 10 sccm to 80 sccm, carrier concentration decreases by an order of magnitude for both RT and HT condition, while carrier mobility first increases and then decreases. It is noteworthy that films fabricated at HT show highest mobility (92.1 cm2 V−1 s−1) and lowest resistivity (2.13 × 10−4 Ω cm) due to better crystallinity and hence decreased grain boundary scattering. In addition, the average transmittance of the IWTO films exceeds 89.5% in the wavelength range of 400–1200 nm. Finally, silicon heterojunction solar cells with a high efficiency of 23.8% (with open-circuit voltage (Voc) of 0.746 V, short-circuit current density (Jsc) of 38.7 mA cm−2 and fill factor (FF) of 82.9%) is achieved with the application of the high-performance IWTO film.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Improving electrical performance of ultrasonic spray pyrolysis grown textured ZnO films by introducing In2O3 :W interface layer10.1016/j.apsusc.2013.04.140 ↗
2. Native oxide barrier layer for selective electroplated metallization of silicon heterojunction solar cells10.1002/solr.201900006 ↗
3. Study and development of rear-emitter Si heterojunction solar cells and application of direct copper metallization10.1002/pip.3000 ↗
4. Understanding the role of mobility of ITO films for silicon heterojunction solar cell applications10.1016/j.solmat.2016.08.002 ↗
5. Boron-doped zinc oxide layers grown by metal-organic CVD for silicon heterojunction solar cells applications10.1016/j.solmat.2010.11.013 ↗
6. Optimized metallization for interdigitated back contact silicon heterojunction solar cells10.1002/solr.201700021 ↗
7. Effect of front TCO on the performance of rear-junction silicon heterojunction solar cells: insights from simulations and experiments10.1016/j.solmat.2019.01.047 ↗
8. Sputtered transparent electrodes (IO:H and IZO) with low parasitic near-infrared absorption for perovskite-Cu(in,Ga)Se2 tandem solar cells10.1021/acsaem.9b01224 ↗
9. Damage at hydrogenated amorphous/crystalline silicon interfaces by indium tin oxide overlayer sputtering10.1063/1.4764529 ↗
10. Towards the implementation of atomic layer deposited In2O3:H in silicon heterojunction solar cells10.1016/j.solmat.2017.01.011 ↗
11. An insight into doping mechanism in Sn-F co-doped transparent conducting ZnO films by correlating structural, electrical and optical properties10.1016/j.jallcom.2015.05.070 ↗
12. A critical study of the optical and electrical properties of transparent and conductive Mo-doped ZnO films by adjustment of Mo concentration10.1016/j.apsusc.2018.07.093 ↗
13. High quality of IWO films prepared at room temperature by reactive plasma deposition for photovoltaic devices10.1088/0022-3727/46/7/075103 ↗
14. Effects of thickness on photoelectric properties and perovskite solar cells application of transparent conductive F and Al co-doped ZnO films10.1016/j.solener.2019.04.085 ↗
15. High mobility transparent conductive W-doped In2O3 thin films prepared at low substrate temperature and its application to solar cells10.1016/j.solmat.2013.11.030 ↗
16. Titanium-doped indium oxide: a high-mobility transparent conductor10.1063/1.1995957 ↗
17. Cerium oxide and hydrogen co-doped indium oxide films for high-efficiency silicon heterojunction solar cells10.1016/j.solmat.2016.01.005 ↗
18. Development of low temperature stoichiometric solution combustion derived transparent conductive ternary zinc tin co-doped indium oxide electrodes10.1039/C7RA09189C ↗
19. Study on properties of Ga/F-co-doped ZnO thin films prepared using atomic layer deposition10.1016/j.tsf.2018.02.030 ↗
20. Development of novel tungsten-doped high mobility transparent conductive In2O3 thin films10.1116/1.2333572 ↗
21. Transparent conductive aluminium and fluorine co-doped zinc oxide films via aerosol assisted chemical vapour deposition10.1039/C4RA09997D ↗
22. Review of rear emitter silicon heterojunction solar cells10.1007/s42341-020-00172-5 ↗
23. MoOx modified ITO/a-Si:H(p) contact for silicon heterojunction solar cell application10.1016/j.materresbull.2017.09.005 ↗
24. Characterization of transparent conductive oxide films and their effect on amorphous/crystalline silicon heterojunction solar cells10.7567/JJAP.56.04CS09 ↗
25. Improved opto-electronic properties of silicon heterojunction solar cells with SiO x/Tungsten-doped indium oxide double anti-reflective coatings10.7567/JJAP.56.08MB09 ↗
26. Studying and fabricating optical, electrical, and structural properties of p-type Al- and N- co-doped SnO2 (ANTO) films and investigating the photo-electro effect of p-ANTO/n-Si heterojunctions10.1016/j.jphotochem.2019.112334 ↗
27. In situ analysis of post-annealing effect on Sn-doped indium oxide films10.1063/1.4968010 ↗
28. Atomic oxygen irradiation resistance of transparent conductive oxide thin films10.1016/j.tsf.2016.12.038 ↗
29. Realization of highly conductive Ga-doped ZnO film with abnormally wide band-gap using magnetron sputtering by simply lowering working pressure10.1016/j.actamat.2017.03.033 ↗
30. Environmental stability of high-mobility indium-oxide based transparent electrodes10.1063/1.4935125 ↗
31. Effect of crystalline structure on optical and electrical properties of IWOH films fabricated by low-damage reactive plasma deposition at room temperature10.1016/j.jallcom.2020.155151 ↗
32. In2O3-Based transparent conducting oxide films with high electron mobility fabricated at low process temperatures
33. Examination of electrical and optical properties of Zn1 − xMgxO:Al fabricated by radio frequency magnetron co-sputtering10.1016/j.tsf.2017.11.040 ↗
34. Characterization of indium-tin oxide interfaces using X-ray photoelectron spectroscopy and redox processes of a chemisorbed probe molecule: effect of surface pretreatment conditions10.1021/la011101t ↗