Microstructure and electrochemical behavior of layered cathodes for molten carbonate fuel cell
Source abstract
Abstract
In the present paper, we demonstrate how modifications of the microstructure and the chemical composition can influence the electrochemical behavior of cathodes for molten carbonate fuel cells (MCFCs). Based on our experience, we designed new MCFC cathode microstructures combining layers made of porous silver, nickel oxide or nickel foam to overcome common issues with the internal resistance of the cell. The microstructures of the standard NiO cathode and manufactured cathodes were extensively investigated using scanning electron microscopy (SEM) and porosity measurements. The electrochemical behavior and overall cell performance were examined by means of electrochemical impedance spectroscopy and single-cell tests in operation conditions. The results show that a porous silver layer tape cast onto standard NiO cathode and nickel foam used as a support layer for tape cast NiO porous layer substantially decrease resistance components representing charge transfer and mass transport phenomena, respectively. Therefore, it is beneficial to combine them into a three-layer cathode since it facilitates separation of predominant physio-chemical processes of gas and ions transport in respective layers ensuring high efficiency. The superiority of the three-layer cathode has been proven by low impedance and high power density as compared to standard NiO cathode.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. MCFC Versus other fuel cells-characteristics, technologies and prospects10.1016/j.jpowsour.2006.04.071 ↗
2. Fuel cells – molten carbonate fuel cells - overview
3. Fuel cell engineering: Toward the design of efficient electrochemical power plants10.1021/ie100902t ↗
4. Strategies and new developments in the field of molten carbonates and high-temperature fuel cells in the carbon cycle10.1016/j.ijhydene.2011.11.006 ↗
5. Scientific and technical maturity of molten carbonate technology10.1016/j.ijhydene.2012.06.016 ↗
6. Energy-related catalysis10.1093/nsr/nwv017 ↗
7. Status report on high temperature fuel cells in Poland - recent advances and achievements10.1016/j.ijhydene.2016.12.087 ↗
8. Experimental comparison of MCFC performance using three different biogas types and methane10.1016/j.jpowsour.2005.01.069 ↗
9. Applicability of molten carbonate fuel cells to various fuels10.1016/j.jpowsour.2006.06.058 ↗
10. Performance assessment of a biogas fuelled molten carbonate fuel cell-thermophotovoltaic cell-thermally regenerative electrochemical cycle-absorption refrigerator-alkaline electrolyzer for multigenerational applications10.1016/j.ijhydene.2019.07.057 ↗
11. Catalysis: Role and challenges for a sustainable energy10.1007/s11244-009-9245-x ↗
12. Carbon capture: Energy wasting technologies or the MCFCs challenge?10.1016/j.ijhydene.2010.10.028 ↗
13. Materials issues and recent developments in molten carbonate fuel cells10.1007/s10008-012-1771-y ↗
14. Atomistic insight into the electrode reaction mechanism of the cathode in molten carbonate fuel cells10.1039/C7TA02011B ↗
15. Catalytic activity of nio cathode in molten carbonate fuel cells10.1016/j.apcatb.2017.10.003 ↗
16. Design of open-porous materials for high-temperature fuel cells
17. Multi-modal porous microstructure for high temperature fuel cell application10.1016/j.jpowsour.2017.11.009 ↗
18. Manufacturing of γ-lialo2 matrix for molten carbonate fuel cell by high-energy milling10.1016/j.ijhydene.2018.02.085 ↗
19. Engineering porous materials for fuel cell applications.
20. The triple phase boundary. a mathematical model and experimental investigations for fuel cells10.1149/1.1851054 ↗
21. Computation of TPB length, surface area and pore size from numerical reconstruction of composite solid oxide fuel cell electrodes10.1016/j.jpowsour.2008.12.145 ↗
22. Triple phase boundaries in solid-oxide cathodes10.1137/080722667 ↗
23. A study on LiCoO2-rich cathode materials for the MCFC based on the LiCoO2-LiFeO2-NiO ternary system10.1016/j.electacta.2004.05.026 ↗
24. The influence of pore size variation on the pressure drop in open-cell foams10.1016/j.matdes.2015.08.079 ↗
25. Investigation of the relationship between morphology and permeability for open-cell foams using virtual materials testing10.1016/j.matdes.2018.03.022 ↗
26. Microstructure effect on the permeability of the tape-cast open-porous materials10.1016/j.matdes.2019.107639 ↗
27. Characterization of spatial distribution of electrolyte in molten carbonate fuel cell cathodes
28. Microstructure driven design of porous electrodes for molten carbonate fuel cell application: Recent progress
29. Quantitative relationships between microstructure and effective transport properties based on virtual materials testing10.1002/aic.14416 ↗
30. Analysis of the 3D microstructure of tape-cast open-porous materials via a combination of experiments and modeling10.1016/j.matdes.2017.07.058 ↗
31. Microstructural correlations for specific surface area and triple phase boundary length for composite electrodes of solid oxide cells10.1016/j.jpowsour.2018.11.095 ↗
32. Insight into cathode microstructure effect on the performance of molten carbonate fuel cell10.1016/j.jpowsour.2021.229562 ↗
33. Metallic foam supported electrodes for molten carbonate fuel cells10.1016/j.matdes.2020.108864 ↗
34. The stability of molten carbonate fuel cell electrodes: A review of recent improvements10.1016/j.apenergy.2011.07.009 ↗
35. Study of nio cathode modified by zno additive for MCFC10.1016/j.jpowsour.2003.10.008 ↗
36. Study of nio cathode modified by rare earth oxide additive for MCFC by electrochemical impedance spectroscopy10.1016/j.electacta.2004.04.019 ↗
37. Study of lifeo2 coated nio as cathodes for MCFC by electrochemical impedance spectroscopy10.1016/j.jpowsour.2004.05.015 ↗
38. TiO2 - Coated Ni powder as a new cathode material for molten carbonate fuel cells10.1016/j.jpowsour.2005.03.236 ↗
39. Electrode performance of a new La0.6Sr0.4Co0.2Fe0.8O3 coated cathode for molten carbonate fuel cells10.1016/j.ijhydene.2012.04.081 ↗
40. Effect of LiNiO2-coated cathode on cell performance in molten carbonate fuel cells10.1016/j.ijhydene.2019.03.080 ↗
41. Features of high-temperature oxidation in air of silver and alloy Ag-Cu, and adsorption of oxygen on silver10.1007/s11106-006-0108-8 ↗
42. Oxygen reduction reaction on silver catalysts in alkaline media: a minireview10.1002/celc.201800913 ↗
43. Polarization studies of molten carbonate fuel cell electrodes10.1149/1.2426044 ↗
44. Belyaev · 1993
45. Electrochemical performance of Nd0.6Sr0.4Co0.5Fe0.5?ø3−δ-Ag composite cathodes in intermediate temperature solid oxide fuel cells10.1016/j.jpowsour.2006.02.027 ↗
46. Characterization of cu, ag and pt added La0.6Sr0.4Co0.2Fe0.8O3−δ and gadolinia-doped ceria as solid oxide fuel cell electrodes by temperature-programmed techniques10.1016/j.jpowsour.2008.11.019 ↗
47. Fabrication and evaluation of ag-impregnated bace0.8sm0.2o2.9 composite cathodes for proton conducting solid oxide fuel cells10.1016/j.jpowsour.2010.03.063 ↗
48. An ag-coated nio cathode for MCFCs operating at low temperatures10.1149/1.3571532 ↗
49. Silver coated cathode for molten carbonate fuel cells10.1016/j.ijhydene.2020.05.112 ↗
50. Physical interpretations of electrochemical impedance spectroscopy of redox active electrodes for electrical energy storage10.1021/acs.jpcc.8b05241 ↗
51. Impedance of SOFC electrodes: A review and a comprehensive case study on the impedance of lsm:ysz cathodes10.1016/j.electacta.2013.10.053 ↗
52. Identification and modelling of the oxygen gas diffusion impedance in sofc porous electrodes: application to pr2nio4+δ10.1016/j.electacta.2015.06.084 ↗
53. The chemical oxygen surface exchange and bulk diffusion coefficient determined by impedance spectroscopy of porous La0.58Sr0.4Co0.2Fe0.8O3 δ (LSCF) cathodes10.1016/j.ssi.2014.11.018 ↗
54. Molten carbonate fuel cell performance analysis varying cathode operating conditions for carbon capture applications10.1016/j.jpowsour.2017.02.081 ↗
55. Influence of cs and rb additions in lik and lina molten carbonates on the behaviour of MCFC commercial porous Ni cathode10.1016/j.ijhydene.2016.09.118 ↗
56. Performance and properties of anodes reinforced with metal oxide nanoparticles for molten carbonate fuel cells10.1016/j.jpowsour.2017.10.015 ↗
57. Ni/c slurries based on molten carbonates as a fuel for hybrid direct carbon fuel cells10.1149/1.3110862 ↗
58. Development of molten carbonate fuel cell using novel cathode material10.1016/0360-3199(95)00097-6 ↗
59. The polarization of molten carbonate fuel cell electrodes10.1149/1.2085473 ↗
60. Molten carbonate fuel cell research: Part I. Comparing cathodic oxygen reduction in lithium/potassium and lithium/sodium carbonate melts10.1016/S0013-4686(99)00305-9 ↗
61. Modeling the performance of MCFC for various fuel and oxidant compositions10.1016/j.ijhydene.2014.05.151 ↗
62. Analysis by electrochemical impedance spectroscopy of new MCFC cathode materials10.1016/S0378-7753(99)00422-X ↗
63. Structural, electrical and electrochemical properties of LiNiO210.1016/S0167-2738(01)00992-4 ↗
64. The reaction of carbon dioxide with an oxygen precovered ag(110) surface10.1063/1.469949 ↗
65. Oxygen reduction on gold electrode in Li2CO3 / K2CO3 (62 / 38 mol %) molten electrolyte: experimental and simulation analysis10.1016/j.electacta.2015.09.043 ↗
66. Fabrication and performance of advanced multi-layer sofc cathodes10.1016/S0955-2219(01)00238-2 ↗
67. Trends in electrode development for next generation solid oxide fuel cells10.1039/C6TA06757C ↗
68. Review of solid oxide fuel cell materials: cathode, anode, and electrolyte10.1007/s41825-020-00029-8 ↗
69. Conformal bi-layered perovskite/spinel coating on a metallic wire network for solid oxide fuel cells via an electrodeposition-based route10.1016/j.jpowsour.2017.02.080 ↗
70. Optimized sofc electrode microstructure10.1016/S0167-2738(96)00464-X ↗
71. Influence of electrode design and contacting layers on performance of electrolyte supported sofc/soec single cells10.3390/ma9110906 ↗