journal article·2021-03

Condition monitoring of solid oxide fuel cells by fast electrochemical impedance spectroscopy: A case example of detecting deficiencies in fuel supply

Gjorgji Nusev, Bertrand Morel, Julie Mougin, Ðani Juričić, Pavle Boškoski

Publisher page

Abstract

Abstract This paper deals with the monitoring of the internal condition of a 6-cell solid oxide fuel cell stack during a 3600-hour test with short fuel starvation intervals. The relationship between change in condition and change of impedance spectra as well as the parameters of the equivalent circuit models are analysed. Tentative features indicating reduced fuel supply are identified. The analysis uses discrete random binary sequence, a stochastic broadband excitation signal that allows much shorter perturbation times. More than 600 electrochemical impedance spectroscopy curves and the associated equivalent circuit model parameters were analysed. High fuel utilisation interval is detected in two ways: (i) by violating the Z-HIT test in the low-frequency part (below ≈ 1 Hz) and (ii) significant change of the area-specific resistance parameter. The degradation after fuel cut-offs is clearly reflected in the change in area-specific resistance and the serial resistance. The numerical implementation of the proposed algorithms is available at: https://repo.ijs.si/pboskoski/py_eis.git .
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Advancements in Solid Oxide Fuel Cells · Fault Detection and Control Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. European Energy Research Alliance · 2019
2. Advancements regarding in-operando diagnosis techniques for solid oxide cells niysz cermets
3. A model-based diagnostic technique to enhance faults isolability in solid oxide fuel cell systems10.1016/j.apenergy.2017.05.069 ↗
4. Process modeling of the impedance characteristics of proton exchange membrane fuel cells10.1016/j.electacta.2016.01.128 ↗
5. A novel diagnostic methodology for fuel cell stack health: performance, consistency and uniformity10.1016/j.enconman.2019.02.031 ↗
6. A study on fuel additive of methanol for room temperature direct methanol fuel cells10.1016/j.enconman.2018.05.006 ↗
7. Ysz electrolyte support with novel symmetric structure by phase inversion process for solid oxide fuel cells10.1016/j.enconman.2018.09.051 ↗
8. Long term durability test of open-cathode fuel cell system under actual operating conditions10.1016/j.enconman.2020.112813 ↗
9. Analysis of impedance spectra for segmented-in-series tubular solid oxide fuel cells10.1149/1.3494214 ↗
10. The fourier analysis of impedance spectra for electroded solid electrolytes10.1002/pssa.2210750240 ↗
11. Advanced impedance study of polymer electrolyte membrane single cells by means of distribution of relaxation times10.1016/j.jpowsour.2018.09.004 ↗
12. Lasia · 2014
13. Yuan · 2010
14. Orazem · 2008
15. Rayleigh copula for describing impedance data–with application to condition monitoring of proton exchange membrane fuel cells10.1016/j.ejor.2017.08.058 ↗
16. Optimal selection of proton exchange membrane fuel cell condition monitoring thresholds10.1016/j.jpowsour.2014.06.110 ↗
17. Fault detection of fuel cell systems based on statistical assessment of impedance data10.1016/j.enconman.2019.05.004 ↗
18. Linear system identification in a nonlinear setting: Nonparametric analysis of the nonlinear distortions and their impact on the best linear approximation10.1109/MCS.2016.2535918 ↗
19. Oxidation failure modes of anode-supported solid oxide fuel cells10.1016/j.jpowsour.2008.03.011 ↗
20. Degradation analysis of anode-supported intermediate temperature-solid oxide fuel cells under various failure modes10.1016/j.jpowsour.2014.11.077 ↗
21. Solid oxide fuel cells damage mechanisms due to ni-ysz re-oxidation: case of the anode supported cell10.1016/j.jpowsour.2009.02.089 ↗
22. A pde model for microscopic simulation of solid oxide fuel cells10.1016/j.jpowsour.2011.10.109 ↗
23. Change of an anode’s microstructure morphology during the fuel starvation of an anode-supported solid oxide fuel cell10.1016/j.ijhydene.2015.03.143 ↗
24. High fuel utilization in solid oxide fuel cells: experimental characterization and data analysis with continuous wavelet transform10.1016/j.jpowsour.2016.03.069 ↗
25. Detection of fuel cell critical status by stack voltage analysis10.1016/j.jpowsour.2006.01.009 ↗
26. Mosbæk · 2014
27. Online total harmonic distortion analysis for solid oxide fuel cell stack monitoring in system applications10.1002/fuce.201700230 ↗
28. On the origin of degradation in fuel cells and its fast identification by applying unconventional online-monitoring tools10.1016/j.apenergy.2020.115603 ↗
29. Boškoski · 2017
30. Barsoukov · 2018
31. Ljung · 1999
32. Isermann · 2011
33. Stark · 2011
34. Mallat · 2008
35. Iatsenko · 2015
36. A practical guide to wavelet analysis10.1175/1520-0477(1998)079<0061:APGTWA>2.0.CO;2 ↗
37. Application of measurement models to impedance spectroscopy III. Evaluation of consistency with the Kramers–Kronig relations10.1149/1.2048479 ↗
38. Bode · 1945
39. Z-hit – a simple relation between impedance modulus and phase angle. providing a new way to the validation of electrochemical impedance spectra
40. On the electrical capacitance of interfaces exhibiting constant phase element behaviour10.1016/S0022-0728(97)00490-7 ↗
41. Impedances of electrochemical systems: Terminology, nomenclature and representation part I: Cells with metal electrodes and liquid solutions10.1351/pac199466091831 ↗
42. Deconvolution of electrochemical impedance spectra for the identification of electrode reaction mechanisms in solid oxide fuel cells10.1023/A:1020599525160 ↗
43. Yuan · 2009
44. Electrical properties of solids. VIII. Dipole moments in polyvinyl chloride-diphenyl systems10.1021/ja01847a013 ↗
45. Evaluation and modeling of the cell resistance in anode-supported solid oxide fuel cells10.1149/1.2801372 ↗
46. Impedance study of alternative (la, sr) feo3- δ and (la, sr)(co, fe) o3- δ miec cathode compositions10.1149/1.3265473 ↗
47. Investigation of solid oxide fuel cell short stacks for mobile applications by electrochemical impedance spectroscopy10.1016/j.electacta.2008.04.047 ↗
48. Gas conversion impedance: A test geometry effect in characterization of solid oxide fuel cell anodes10.1149/1.1838654 ↗
49. Klotz · 2014
50. Oxygen transport kinetics of mixed ionic-electronic conductors by coupling focused ion beam tomography and electrochemical impedance spectroscopy10.1149/2.0851704jes ↗
51. Towards a practical tool for online monitoring of solid oxide fuel cell operation: An experimental study and application of advanced data analysis approaches10.1016/j.apenergy.2018.03.182 ↗
52. Monitoring the degradation of a solid oxide fuel cell stack during 10, 000 h via electrochemical impedance spectroscopy10.1016/j.electacta.2011.10.080 ↗
53. Impact of ‘redox’cycles on performances of solid oxide fuel cells: case of the electrolyte supported cells10.1016/j.jpowsour.2009.10.099 ↗
54. Simulation of sofc stack and repeat elements including interconnect degradation and anode reoxidation risk10.1016/j.jpowsour.2006.04.151 ↗
55. Electrochemical characterization and degradation analysis of large sofc stacks by impedance spectroscopy10.1002/fuce.201200175 ↗