journal article·2019-12

Damage analysis of cylindrical lithium-ion cells under three-points bending using acoustic emission

Wenfeng Hao, Zengrui Yuan, Yezhuang Xu, Shengxin Zhu, Haosen Chen, Daining Fang

Publisher page

Abstract

Abstract Lithium-ion cells are vulnerable to various types of deformations due to the influence of external forces. Failure to detect the damage degree of lithium-ion cells affects the cell use and can be dangerous. In this paper, the failure process of cylindrical lithium-ion cells under three-points bending was studied using acoustic emission (AE). A real time in situ experimental platform was built based on voltage and AE monitoring. The AE signals of three 18650 lithium-ion cells were obtained, and the wavelet transformation was used to analyze the signals. The load-displacement curves and the AE signals in time domain of the lithium-ion cells were divided into four stages, which corresponded to different failure modes of the lithium-ion cells. The time-frequency analysis was performed, and the corresponding frequency and energy of the signals in different failure stages were obtained, which verified the time domain results. The results showed that the AE technique was an effective tool for failure monitoring of the lithium-ion cells, and the different failure modes were recognized by the AE signal characteristics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Fault Detection and Control Systems · Advancements in Battery Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. A review of safety-focused mechanical modeling of commercial lithium-ion batteries10.1016/j.jpowsour.2017.12.034 ↗
2. Thermal runaway mechanism of lithium ion battery for electric vehicles: a review10.1016/j.ensm.2017.05.013 ↗
3. A review of state of health and remaining useful life estimation methods for lithium-ion battery in electric vehicles: challenges and recommendations10.1016/j.jclepro.2018.09.065 ↗
4. Mechanical behavior of representative volume elements of lithium-ion battery modules under various loading conditions10.1016/j.jpowsour.2013.09.128 ↗
5. Multiphysics computational framework for cylindrical lithium-ion batteries under mechanical abusive loading10.1016/j.electacta.2017.10.045 ↗
6. Thermal runaway detection of cylindrical 18650 lithium-ion battery under quasi-static loading conditions10.1016/j.jpowsour.2017.10.013 ↗
7. Microscale failure mechanisms leading to internal short circuit in Li-ion batteries under complex loading scenarios10.1016/j.jpowsour.2016.04.005 ↗
8. Mechanical behavior of representative volume elements of lithium-ion battery cells under compressive loading conditions10.1016/j.jpowsour.2013.06.134 ↗
9. Mechanical damage in a lithium-ion pouch cell under indentation loads10.1016/j.jpowsour.2017.04.101 ↗
10. Computational models for simulation of a lithium-ion battery module specimen under punch indentation10.1016/j.jpowsour.2014.09.072 ↗
11. Continuous carbon nanotube composite fibers for flexible aqueous lithium-ion batteries
12. An analytical model for the fracture behavior of the flexible lithium-ion batteries under bending deformation10.1016/j.euromechsol.2018.06.012 ↗
13. Numerical simulation model for short circuit prediction under compression and bending of 18650 cylindrical lithium-ion battery10.1016/j.egypro.2018.09.046 ↗
14. Deformation and failure mechanisms of 18650 battery cells under axial compression10.1016/j.jpowsour.2016.10.064 ↗
15. Computational models for simulations of lithium-ion battery cells under constrained compression tests10.1016/j.jpowsour.2013.05.022 ↗
16. Coupling effect of state-of-health and state-of-charge on the mechanical integrity of lithium-ion batteries10.1007/s11340-018-0380-9 ↗
17. Failure in lithium-ion batteries under transverse indentation loading10.1016/j.jpowsour.2018.04.003 ↗
18. Acoustic emission monitoring of damage progression in 3D braiding composite shafts during torsional tests10.1016/j.compstruct.2018.10.011 ↗
19. Clustering of AE signals collected during torsional tests of 3D braiding composite shafts using PCA and FCM10.1016/j.compositesb.2018.12.145 ↗
20. Experimental study on the torsion behavior of a 3D 4-directionally braided composite shaft using DIC and AE10.1016/j.polymertesting.2018.10.016 ↗
21. Study of sulfur-based electrodes by operando acoustic emission10.1016/j.electacta.2019.01.019 ↗
22. In-situ study of the cracking of metal hydride electrodes by acoustic emission technique10.1016/j.jpowsour.2007.12.073 ↗
23. Damage-induced acoustic emission source identification in an advanced sandwich composite structure10.1016/j.compstruct.2018.04.051 ↗
24. Barely visible impact damage assessment in laminated composites using acoustic emission10.1016/j.compositesb.2018.07.016 ↗
25. A review of state of health estimation of energy storage systems: challenges and possible solutions for futuristic applications of Li-ion battery packs in electric vehicles
26. Towards a smarter battery management system: a critical review on battery state of health monitoring methods10.1016/j.jpowsour.2018.10.019 ↗
27. Critical review of state of health estimation methods of Li-ion batteries for real applications10.1016/j.rser.2015.11.042 ↗
28. State of charge and state of health estimation using electrochemical acoustic time of flight analysis10.1149/2.1411712jes ↗
29. Estimating state of charge and health of lithium-ion batteries with guided waves using built-in piezoelectric sensors/actuators10.1016/j.jpowsour.2018.02.056 ↗
30. Electrochemical-acoustic time of flight: in operando correlation of physical dynamics with battery charge and health10.1039/C5EE00111K ↗
31. Anode characterization in zinc-manganese dioxide AA alkaline batteries using electrochemical-acoustic time-of-flight analysis10.1149/2.1201606jes ↗
32. Bhadra · 2015
33. In-situ acoustic emission study of Si-based electrodes for Li-ion batteries10.1016/j.jpowsour.2014.12.126 ↗
34. Mechano-electrochemical model for acoustic emission characterization in intercalation electrodes10.1149/2.0201411jes ↗
35. New insights into the pulverization of LaNi5-based alloys with different Co contents from electrochemical acoustic emission measurements10.1016/j.electacta.2015.09.171 ↗
36. Evaluation of acoustic emission as a suitable tool for aging characterization of LiAl/LiMnO2 cell10.1016/j.electacta.2012.10.121 ↗
37. Development of acoustic emission clustering method to detect degradation of lithium ion batteries10.1299/jmmp.5.678 ↗
38. Direct evidence of morphological changes in conversion type electrodes in Li-ion battery by acoustic emission10.1016/j.elecom.2010.07.014 ↗
39. Monitoring of particle fracture by acoustic emission during charge and discharge of Li/MnO2 cells10.1149/1.1838039 ↗
40. In situ investigation of the volume change and pulverization of hydride materials for Ni-MH batteries by concomitant generated force and acoustic emission measurements10.1016/j.jpowsour.2012.01.066 ↗
41. On the decrepitation mechanism of MgNi and LaNi5-based electrodes studied by in situ acoustic emission10.1016/j.jpowsour.2011.01.098 ↗