journal article·2019-08

Induced nanoscale roughness of current collectors enhances lithium ion battery performances

Jimmy Ching-Ming Chen, Jinho Yang, Mark Ming-Cheng Cheng

Publisher page

Abstract

Abstract In this paper, in-situ nanomechanical measurement and ex-situ morphology study were conducted to investigate the surface roughness effects of current collectors on the performance of thin film silicon anodes. The in-situ analysis quantifies electrochemical processes and associated mechanical stress such as silicon-lithium alloy formation during charge and discharge. Upon lithiation, after SEI formation (approximately below 0.35 V), both α-Si films deposited on the pristine and FeCl3-etched copper experience elastic deformation with a rapid rise of a compressive stress. The films begin to deform plastically after the stress reaches compressive yield strength. Upon delithiation, the α-Si on the pristine copper has shown to have stress dissipation at a tensile stress of 0.28 GPa. However, the tensile stress of the α-Si on the FeCl3-etched copper continues until the stress reaches 0.4 GPa at the end of delithiation. In addition, the silicon anode was found to form small islands on roughened current collector (instead of peel-off from flat current collector), indicating the design of the current collector may play an important role in the performance of lithium ion battery.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Semiconductor materials and devices · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cells10.1016/j.jpowsour.2006.09.084 ↗
2. Nanostructured silicon for high capacity lithium battery anodes10.1039/C0EE00281J ↗
3. Nanostructured materials for advanced energy conversion and storage devices10.1038/nmat1368 ↗
4. Si electrodes for li-ion batteries - a new way to look at an old problem10.1149/1.2817828 ↗
5. Highly reversible lithium storage in nanostructured silicon10.1149/1.1596917 ↗
6. Nanostructured silicon anodes for lithium ion rechargeable batteries10.1002/smll.200900382 ↗
7. Nanostructured hybrid silicon/carbon nanotube heterostructures: reversible high-capacity lithium-ion anodes10.1021/nn901632g ↗
8. High-performance lithium battery anodes using silicon nanowires10.1038/nnano.2007.411 ↗
9. A review of the electrochemical performance of alloy anodes for lithium-ion batteries10.1016/j.jpowsour.2010.07.020 ↗
10. A vacuum deposited Si film having a Li extraction capacity over 2000 mAh/g with a long cycle life10.1016/j.jpowsour.2003.11.014 ↗
11. Enhanced electrochemical performance of silicon-based anode material by using current collector with modified surface morphology10.1016/j.electacta.2008.01.050 ↗
12. Micrometer-scale amorphous Si thin-film electrodes fabricated by electron-beam deposition for Li-ion batteries10.1149/1.2160429 ↗
13. Electrochemical properties of negative SiMox electrodes deposited on a roughened substrate for rechargeable lithium batteries10.1016/j.jpowsour.2009.05.047 ↗
14. An electrochemically roughened Cu current collector for Si-based electrode in Li-ion batteries10.1016/j.jpowsour.2013.03.108 ↗
15. Interfacial structural stabilization on amorphous silicon anode for improved cycling performance in lithium-ion batteries10.1016/j.electacta.2009.12.067 ↗
16. Metal foam as positive electrode current collector for LiFePO4-based Li-ion battery10.7567/JJAP.52.10MB13 ↗
17. Ni foam as the current collector for high capacity C-Si composite electrode10.1016/j.jpowsour.2012.02.020 ↗
18. Sn-Co alloy anode using porous Cu as current collector for lithium ion battery10.1016/j.jallcom.2008.09.030 ↗
19. An approach to make macroporous metal sheets as current collectors for lithium-ion batteries10.1149/1.3417076 ↗
20. Stress effect on cycle properties of the silicon thin-film anode10.1016/S0378-7753(01)00761-3 ↗
21. In situ measurements of stress evolution in silicon thin films during electrochemical lithiation and delithiation10.1016/j.jpowsour.2010.02.013 ↗
22. Real-time measurement of stress and damage evolution during initial lithiation of crystalline silicon10.1103/PhysRevLett.107.045503 ↗
23. In situ XRD and electrochemical study of the reaction of lithium with amorphous silicon10.1149/1.1739217 ↗
24. Insertion electrode materials for rechargeable lithium batteries10.1002/(SICI)1521-4095(199807)10:10<725::AID-ADMA725>3.0.CO;2-Z ↗
25. In-situ monitor electrochemical processes in batteries using vibrating microcantilevers
26. The yield strength of thin copper films on Kapton10.1063/1.1644634 ↗
27. Determining thermal expansion coefficients of thin films using micromachined cantilevers10.1016/S0924-4247(99)00019-9 ↗
28. Analysis of bi-metal thermostats10.1364/JOSA.11.000233 ↗
29. Structural changes in silicon anodes during lithium insertion/extraction10.1149/1.1652421 ↗
30. Reversible cycling of crystalline silicon powder10.1149/1.2402112 ↗
31. Elastic softening of amorphous and crystalline Li-Si Phases with increasing Li concentration: a first-principles study10.1016/j.jpowsour.2010.04.044 ↗
32. On plastic deformation and fracture in Si films during electrochemical lithiation/delithiation cycling10.1149/2.098310jes ↗
33. Measurements of the fracture energy of lithiated silicon electrodes of Li-ion batteries10.1021/nl403197m ↗
34. Surface-roughness effects on stress determination by the X-ray-diffraction method10.1111/j.1747-1567.1995.tb00840.x ↗
35. Influence of random roughness on cantilever curvature sensitivity
36. Improved cycling stability of silicon thin film electrodes through patterning for high energy density lithium batteries10.1016/j.jpowsour.2010.08.058 ↗
37. Stress mitigation during the lithiation of patterned amorphous Si islands10.1149/2.048201jes ↗
38. Variation of the interfacial shear strength and adhesion of a nanometer-sized contact10.1021/la9509007 ↗
39. High-temperature pressure-shear plate impact experiments on OFHC copper10.1016/S0022-5096(98)00055-6 ↗
40. Micromechanics of friction: effects of nanometre-scale roughness
41. The cracking and decohesion of thin-films on ductile substrates10.1016/0001-6160(89)90018-7 ↗
42. Analysis of stress singularities in Bi-material interfaces with applications to ic packaging
43. Cracking of thin bonded films in residual tension10.1016/0020-7683(92)90015-L ↗