Hard carbons from automotive shredder residue (ASR) as potential anode active material for sodium ion battery
Source abstract
Abstract
Graphite, the most prominent anode material for Li-ion battery, exhibited very poor performance in sodium ion battery. The electrochemical intercalation of Na+ ions in graphite is impeded due to smaller interlayer spacing. Here, we have reported ASR derived hard carbon as a suitable anode electroactive material for Na-ion battery. Prepared via single step selective thermal transformation, the hard carbons contain defects, heteroatoms, nanopore, and ordered carbon zones with expanded interlayer spacing. Among all the hard carbons, the hard carbon synthesised at 1100 °C, showed better electrochemical performance owing to its improved structural and morphological properties. The electrochemical study reveals that hard carbon synthesised at 1100 °C provides initial reversible capacity of 434mAh/g at a current density of 10 mA/g with a capacity retention of 53% after 100 cycles. Issues like global warming and climate changes have made human to shift their energy choices from fossil fuels to renewable sources. Although Li-ion battery is currently dominating the energy market, yet it falls short to meet the growing large scale energy storage system (EES) demand. Na-ion battery is considered as a worthy contender for growing ESS. The hard carbon studied in this work, can be a potential candidate for use as anode active material in Na-ion battery.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Extraction and Separation Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. Room-temperature stationary sodium-ion batteries for large-scale electric energy storage10.1039/c3ee40847g ↗
2. Overview of energy storage in renewable energy systems10.1016/j.ijhydene.2016.06.243 ↗
3. A cost and resource analysis of sodium-ion batteries10.1038/natrevmats.2018.13 ↗
4. Na-ion batteries, recent advances and present challenges to become low cost energy storage systems10.1039/c2ee02781j ↗
5. Expanded graphite as superior anode for sodium-ion batteries10.1038/ncomms5033 ↗
6. Electrochemical intercalation of sodium in graphite10.1016/0167-2738(88)90351-7 ↗
7. The mechanisms of lithium and sodium insertion in carbon materials10.1149/1.1379565 ↗
8. Biomass derived high areal and specific capacity hard carbon anodes for sodium-ion batteries10.1021/acs.energyfuels.0c03741 ↗
9. Expanded biomass-derived hard carbon with ultra-stable performance in sodium-ion batteries10.1039/C7TA07951F ↗
10. Low-cost water caltrop shell-derived hard carbons with high initial coulombic efficiency for sodium-ion battery anodes10.1016/j.jallcom.2018.10.180 ↗
11. Correlation between microstructure and Na storage behavior in hard carbon10.1002/aenm.201501588 ↗
12. Sodium-ion batteries: improving the rate capability of 3D interconnected carbon nanofibers thin film by boron, nitrogen dual-doping10.1002/advs.201600468 ↗
13. Covalent-organic-frameworks derived N-doped porous carbon materials as anode for superior long-life cycling lithium and sodium ion batteries10.1016/j.carbon.2017.02.057 ↗
14. Bio-derived hierarchically macro-meso-micro porous carbon anode for lithium/sodium ion batteries10.1016/j.jpowsour.2016.08.106 ↗
15. Controlling pseudographtic domain dimension of dandelion derived biomass carbon for excellent sodium-ion storage10.1016/j.jpowsour.2017.05.011 ↗
16. Synthesis of functionalized 3D hierarchical porous carbon for high-performance supercapacitors10.1039/c3ee41638k ↗
17. Direct chitin conversion to N-doped amorphous carbon nanofibers for high-performing full sodium-ion batteries10.1016/j.nanoen.2017.12.042 ↗
18. Recent advances in nanostructured carbon for sodium-ion batteries10.1039/C9TA09984K ↗
19. Trash to treasure: from harmful algal blooms to high-performance electrodes for sodium-ion batteries10.1021/acs.est.5b03882 ↗
20. Hard carbon anodes of sodium-ion batteries: undervalued rate capability10.1039/C7CC00301C ↗
21. High capacity hard carbon derived from lotus stem as anode for sodium ion batteries10.1016/j.jpowsour.2017.12.054 ↗
22. Synthesis and characterization of d-glucose derived nanospheric hard carbon negative electrodes for lithium- and sodium-ion batteries10.1016/j.electacta.2017.09.094 ↗
23. Cryogenic ball milling: a key for elemental analysis of plastic-rich automotive shedder residue10.1016/j.powtec.2016.03.009 ↗
24. Insights into the options of energy and metal recovery from automotive shredder residue: a review
25. Thermocatalytic conversion of automotive shredder waste and formation of nanocarbons as a process byproduct10.1021/acssuschemeng.7b00774 ↗
26. Feasibility study on co-processing of automobile shredder residue in coal-fired power plants via pyrolysis10.1016/j.wasman.2022.02.028 ↗
27. CuO cauliflowers for supercapacitor application: novel potentiodynamic deposition10.1016/j.materresbull.2012.11.081 ↗
28. Implications of the end-of-life vehicles directive on the vehicle recovery sector10.1243/09544054JEM473SC ↗
29. Graphite recycling from the spent lithium-ion batteries by sulfuric acid curing–leaching combined with high-temperature calcination10.1021/acssuschemeng.0c02321 ↗
30. Recycle, recover and repurpose strategy of spent Li-ion batteries and catalysts: current status and future opportunities10.1002/cssc.201903213 ↗
31. Bioleaching of valuable metals from spent lithium-ion mobile phone batteries using Aspergillus Niger10.1016/j.jpowsour.2016.04.104 ↗
32. Status of recycling end-of-life vehicles and efforts to reduce automobile shredder residues in Korea10.1007/s10163-007-0181-1 ↗
33. Activated carbon from E-waste plastics as a promising anode for sodium-ion batteries10.1021/acssuschemeng.9b00135 ↗
34. Structural and electrochemical properties of hard carbon negative electrodes for sodium secondary batteries using the Na[FSA]–[C3C1pyrr][FSA] ionic liquid electrolyte10.5796/electrochemistry.85.391 ↗
35. Tire-derived carbon composite anodes for sodium-ion batteries10.1016/j.jpowsour.2016.03.071 ↗
36. Nutty carbon: morphology replicating hard carbon from walnut shell for Na ion battery anode10.1021/acsomega.7b00633 ↗
37. Synthesis of hard carbon from argan shells for Na-ion batteries10.1039/C7TA01394A ↗
38. Sucrose-derived hard carbon wrapped with reduced graphene oxide as a high-performance anode for sodium-ion batteries10.1039/D3TA00898C ↗
39. High temperature carbonized grass as a high performance sodium ion battery anode10.1021/acsami.6b12542 ↗
40. Surface-driven sodium ion energy storage in nanocellular carbon foams10.1021/nl401995a ↗
41. Recovering renewable carbon materials from automotive shredder residue (ASR) for micro-supercapacitor electrodes10.1016/j.jclepro.2021.127131 ↗
42. Contribution to the study by X-ray photoelectron spectroscopy of the natural aging of the polypropylene
43. A review on C1s XPS-spectra for some kinds of carbon materials10.1080/1536383X.2020.1794851 ↗
44. High-quality laser-assisted biomass-based turbostratic graphene for high-performance supercapacitors10.1016/j.carbon.2020.10.042 ↗
45. Quasi-freestanding graphene on SiC(0001) by Ar-mediated intercalation of antimony: a route toward intercalation of high-vapor-pressure elements10.1002/andp.201900199 ↗
46. Combined effect of nitrogen-and oxygen-containing functional group of microporous activated carbon on its electrochemical performance in supercapacitors10.1002/adfm.200801236 ↗
47. Correlation between microstructure and Na storage behavior in hard carbon10.1002/aenm.201501588 ↗
48. A high-performance sodium-ion battery enhanced by macadamia shell derived hard carbon anode10.1016/j.nanoen.2017.07.018 ↗
49. Multiphysics modeling of lithium ion battery capacity fading process with solid-electrolyte interphase growth by elementary reaction kinetics10.1016/j.jpowsour.2013.09.059 ↗
50. Raman spectroscopy of amorphous, nanostructured, diamond–like carbon, and nanodiamond10.1098/rsta.2004.1452 ↗
51. New mechanistic insights on Na-ion storage in nongraphitizable carbon10.1021/acs.nanolett.5b01969 ↗
52. General aspects in the use of graphenes in catalysis10.1039/C8MH00066B ↗
53. Ab initio study of sodium intercalation into disordered carbon10.1039/C5TA01443C ↗
54. Defective graphene as a high-capacity anode material for Na-and Ca-ion batteries10.1021/am404788e ↗
55. Popov · Nano Res. · 2012 · 5 · 11710.1007/s12274-011-0192-z ↗
56. Electrochemical investigation of the chemical diffusion, partial ionic conductivities, and other kinetic parameters in Li3Sb and Li3Bi10.1016/0022-4596(77)90006-8 ↗
57. Unravelling the properties of microzonal carbon from waste hard rubber by selective thermal transformation via conventional heating and microwave irradiation10.1016/j.carbon.2023.118274 ↗
58. Soft-carbon-coated, free-standing, low-defect, hard-carbon anode to achieve a 94% initial coulombic efficiency for sodium-ion batteries10.1021/acsami.1c12171 ↗
59. Carbon materials for lithium-ion rechargeable batteries10.1016/S0008-6223(98)00290-5 ↗
60. Electrochemical Na insertion and solid electrolyte interphase for hard‐carbon electrodes and application to Na‐Ion batteries10.1002/adfm.201100854 ↗
61. The mechanism of the sodiation and desodiation in Super P carbon electrode for sodium-ion battery10.1016/j.jpowsour.2016.11.048 ↗
62. Influence of graphite surface properties on the first electrochemical lithium intercalation10.1016/j.carbon.2011.07.007 ↗
63. Influence of graphite characteristics on the electrochemical performance in alkylcarbonate LiTFSI electrolyte for Li-ion capacitors and Li-ion batteries10.1149/2.101310jes ↗
64. Electrochemical impedance study of Li-ion insertion into mesocarbon microbead single particle electrode: Part II. Disordered carbon10.1016/S0013-4686(01)00809-X ↗
65. Hard carbon nanoparticles as high-capacity, high-stability anodic materials for Na-ion batteries10.1016/j.nanoen.2015.10.034 ↗
66. Surface-dominated storage of heteroatoms-doping hard carbon for sodium-ion batteries10.1016/j.ensm.2020.01.014 ↗
67. Tailoring superficial morphology, defect and functional group of commercial carbon cloth for a flexible, stable and high-capacity anode in sodium ion battery10.1016/j.electacta.2021.137934 ↗
68. C-Na (Carbon-Sodium) system10.1007/s11669-007-9194-7 ↗
69. Conversion reactions for sodium-ion batteries10.1039/c3cp52125g ↗
70. Mechanism of Na‐ion storage in hard carbon anodes revealed by heteroatom doping10.1002/aenm.201602894 ↗
71. Adsorption of lead on the surfaces of pristine and B, Si and N-doped graphene10.1016/j.physb.2020.412639 ↗
72. Heteroatom-doped graphene materials: syntheses, properties and applications10.1039/C4CS00141A ↗
73. Molecular interactions between pre-formed metal nanoparticles and graphene families
74. Sodium ion insertion in hollow carbon nanowires for battery applications10.1021/nl3016957 ↗
75. Single sheet functionalized graphene by oxidation and thermal expansion of graphite10.1021/cm0630800 ↗