journal article·2023-10Open access

Introducing an ionic conductive matrix to the cold-sintered Li1.3Al0.3Ti1.7(PO4)3-based composite solid electrolyte to enhance the electrical properties

Sergio Ferrer-Nicomedes, Andrés Mormeneo-Segarra, Nuria Vicente-Agut, Antonio Barba-Juan

Abstract

In the present work, a Polymer-In-Ceramics (PIC) solid electrolyte based on Li1.3Al0.3Ti1.7(PO4)3 (LATP) and PEOn-LiTFSI (poly(ethylene oxide) - lithium bis(trifluoromethanesulfonyl)imide) is obtained via Cold Sintering Process (CSP), at a temperature of 150 °C without any post-heat treatment, this is 900 °C below the traditional sintering temperature. This novel study demonstrates the effect of the Transient Liquid Phase content (TLP) and the composition of the polymeric active filler on the final Composite Solid Electrolyte (CSE) properties, with the sintering process being monitored by in-operando Electrochemical Impedance Spectroscopy (EIS). Firstly, the 15 wt% of TLP is stated as the optimal liquid content based on the electrical answer and workability. Then, the (EO:Li+) molar ratio is studied from (1:1) to (8:1). The highest ionic conductivity of 1.04·10−4 S cm−1 and a relative density above 98% are achieved at room temperature when the TLP content is 15 wt% and the molar ratio (2:1), with the LATP content set in 90 wt%. Moreover, the activation energy (Ea) is drastically reduced, from 0.388 eV (LATP ceramic electrolyte) to 0.298 eV (PIC electrolyte), with a lithium transference number (tLi+) close to 1. Therefore, this research work proposes a potential solid electrolyte to substitute the traditional liquid electrolytes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. Before Li ion batteries10.1021/acs.chemrev.8b00422 ↗
2. Promise and reality of post-lithium-ion batteries with high energy densities10.1038/natrevmats.2016.13 ↗
3. Life cycle analysis of lithium-ion batteries for automotive applications
4. Rapidly falling costs of battery packs for electric vehicles10.1038/nclimate2564 ↗
5. Microstructures and electrochemical performances of TiO2-coated Mg–Zr co-doped NCM as a cathode material for lithium-ion batteries with high power and long circular life10.1039/D1NJ03740D ↗
6. Three-dimensional hierarchically porous nitrogen-doped carbon from water hyacinth as selenium host for high-performance lithium-selenium batteries10.1007/s12598-022-02022-0 ↗
7. (NH4)2Co2V10O28·16H2O/(NH4)2V10O25·8H2O heterostructure as cathode for high-performance aqueous Zn-ion batteries10.1016/j.jallcom.2022.163824 ↗
8. High-performance monoclinic WO 3 nanospheres with the novel NH 4 + diffusion behaviors for aqueous ammonium-ion batteries10.1016/j.cej.2023.141381 ↗
9. A review of lithium-ion battery safety concerns: the issues, strategies, and testing standards10.1016/j.jechem.2020.10.017 ↗
10. Li-ion battery materials: present and future10.1016/j.mattod.2014.10.040 ↗
11. A solid future for battery development10.1038/nenergy.2016.141 ↗
12. Progress in solid electrolytes toward realizing solid-state lithium batteries10.1016/j.jpowsour.2018.05.003 ↗
13. Recent progress in all-solid-state lithium batteries: the emerging strategies for advanced electrolytes and their interfaces10.1016/j.ensm.2020.05.019 ↗
14. Solid polymer electrolytes: materials designing and all-solid-state battery applications: an overview10.1088/0022-3727/41/22/223001 ↗
15. Beyond PEO—alternative host materials for Li+-conducting solid polymer electrolytes10.1016/j.progpolymsci.2017.12.004 ↗
16. Recent advancements in polymer-based composite electrolytes for rechargeable lithium batteries10.1007/s41918-018-0011-2 ↗
17. Lithium salts for advanced lithium batteries: Li–metal, Li–O2, and Li–S10.1039/C5EE01215E ↗
18. Li+ ion conducting γ solid solutions in the systems Li4XO4-Li3YO4: X=Si, Ge, Ti; Y=P, As, V; Li4XO4-LiZO2: Z=Al, Ga, Cr and Li4GeO4-Li2CaGeO410.1016/0167-2738(85)90002-5 ↗
19. Li6PS5X: a class of crystalline Li-rich solids with an unusually high Li+ mobility10.1002/anie.200703900 ↗
20. Garnet-type solid-state fast Li ion conductors for Li batteries: critical review10.1039/c4cs00020j ↗
21. Relationship between activation energy and bottleneck size for Li+ ion conduction in NASICON materials of composition LiMM‘(PO4)3; M, M‘ = Ge, Ti, Sn, Hf10.1021/jp973296c ↗
22. Mechanism of ionic conduction and electrochemical intercalation of lithium into the perovskite lanthanum lithium titanate10.1016/S0167-2738(96)00434-1 ↗
23. Progress and perspectives on typical inorganic solid-state electrolytes10.1016/j.jallcom.2021.161013 ↗
24. The mechanism of enhanced ionic conductivity in Li1.3Al0.3Ti1.7(PO4)3–(0.75Li2O·0.25B2O3) composites10.1016/j.jallcom.2020.155623 ↗
25. Study on lithium/air secondary batteries—stability of NASICON-type lithium ion conducting glass–ceramics with water10.1016/j.jpowsour.2008.08.009 ↗
26. Progress and perspective of ceramic/polymer composite solid electrolytes for lithium batteries
27. Composite solid electrolytes for all-solid-state lithium batteries10.1016/j.mser.2018.10.004 ↗
28. Enhancing ionic conductivity in composite polymer electrolytes with well-aligned ceramic nanowires10.1038/nenergy.2017.35 ↗
29. Tailoring practically accessible polymer/inorganic composite electrolytes for all-solid-state lithium metal batteries: a review10.1007/s40820-022-00996-1 ↗
30. PEO/garnet composite electrolytes for solid-state lithium batteries: from “ceramic-in-polymer” to “polymer-in-ceramic”10.1016/j.nanoen.2017.12.037 ↗
31. Cold sintering of Li6.4La3Zr1.4Ta0.6O12/PEO composite solid electrolytes10.3390/molecules27196756 ↗
32. Rational design of hierarchical “ceramic-in-polymer” and “polymer-in-ceramic” electrolytes for dendrite-free solid-state batteries10.1002/aenm.201804004 ↗
33. Protocol for ultralow-temperature ceramic sintering: an integration of nanotechnology and the cold sintering process10.1021/acsnano.6b03800 ↗
34. A review of cold sintering processes10.1080/17436753.2019.1706825 ↗
35. The cold sintering process: a review on processing features, densification mechanisms and perspectives10.1016/j.jeurceramsoc.2021.09.024 ↗
36. Recent progress in applications of the cold sintering process for ceramic–polymer composites10.1002/adfm.201801724 ↗
37. Ceramic–salt composite electrolytes from cold sintering10.1002/adfm.201807872 ↗
38. Identifying Li+ ion transport properties of aluminum doped lithium titanium phosphate solid electrolyte at wide temperature range10.1016/j.ssi.2014.10.004 ↗
39. Preparation and electrochemical study of PVDF-HFP/LATP/g-C3N4 composite polymer electrolyte membrane10.1016/j.inoche.2021.108793 ↗
40. Cold Sintering Process characterization by in operando electrochemical impedance spectroscopy10.1016/j.jeurceramsoc.2022.05.077 ↗
41. Cold sintering: a paradigm shift for processing and integration of ceramics10.1002/anie.201605443 ↗
42. Cold sintering: current status and prospects10.1557/jmr.2017.262 ↗
43. Cold sintering: progress, challenges, and future opportunities10.1146/annurev-matsci-070218-010041 ↗
44. A theoretical analysis of cold sintering10.1080/17436753.2019.1692173 ↗
45. Comparing hydrothermal sintering and cold sintering process: mechanisms, microstructure, kinetics and chemistry10.1016/j.jeurceramsoc.2019.11.049 ↗
46. Water-mediated surface diffusion mechanism enables the cold sintering process: a combined computational and experimental study10.1002/anie.201904738 ↗
47. Reassessing cold sintering in the framework of pressure solution theory10.1016/j.jeurceramsoc.2022.09.053 ↗
48. Insight into the microstructure and ionic conductivity of cold sintered NASICON solid electrolyte for solid-state batteries10.1021/acsami.9b08132 ↗
49. Li-ion conductive Li1.3Al0.3Ti1.7(PO4)3 (LATP) solid electrolyte prepared by cold sintering process with various sintering additives10.3390/nano12183178 ↗
50. Microstructure and ionic conductivities of NASICON-type Li1.3Al0.3Ti1.7(PO4)3 solid electrolytes produced by cold sintering assisted process10.1016/j.jallcom.2023.168702 ↗
51. Correlating structure and transport properties in pristine and environmentally-aged superionic conductors based on Li 1.3 Al 0.3 Ti 1.7 (PO 4) 3 ceramics10.1016/j.jpowsour.2019.227367 ↗
52. Lithium ion conducting poly(ethylene oxide)-based solid electrolytes containing active or passive ceramic nanoparticles10.1021/acs.jpcc.6b11136 ↗
53. NASICON-type polymer-in-ceramic composite electrolytes for lithium batteries10.1039/C9CP00405J ↗
54. Improving ionic conductivity and lithium-ion transference number in lithium-ion battery separators10.1021/acsami.6b12085 ↗
55. Promising routes to a high Li+ transference number electrolyte for lithium ion batteries10.1021/acsenergylett.7b00792 ↗
56. Insight into the key factors in high Li+ transference number composite electrolytes for solid lithium batteries10.1002/cssc.202201801 ↗
57. Anionic metal-organic framework modified separator boosting efficient Li-ion transport
58. Preparation and performance study of a PVDF–LATP ceramic composite polymer electrolyte membrane for solid-state batteries10.1039/C8RA08436J ↗
59. Chapter 3 - overview of rechargeable lithium battery systems
60. Atomistic analysis of Li migration in Li1+xAlxTi2−x(PO4)3 (LATP) solid electrolytes10.1016/j.ssi.2020.115521 ↗
61. Design of solid electrolytes with fast ion transport: computation-driven and practical approaches10.34133/energymatadv.0015 ↗
62. 14 - polymer electrolytes as solid solvents and their applications
63. Increase in ionic conductivity of NASICON-type solid electrolyte Li1.5Al0.5Ti1.5(PO4)3 by Nb2O5 doping10.1016/j.ssi.2020.115399 ↗