Effect of the high oxygen excess ratio design on the performance of air-cooling polymer electrolyte membrane fuel cells for unmanned aerial vehicles
Source abstract
Abstract
Oxygen excess ratio (OER) is a key parameter that affects output power and operating current density of air-cooling polymer electrolyte membrane fuel cells (PEMFCs). In this work, the design method and performance model of air-cooling PEMFCs for UAVs with high OER are proposed. The high OER is realized by using high-speed airflow behind propeller to feed PEMFC cathode. The effect of high OER on the PEMFC performance is investigated by measuring OER and the output power of PEMFC. The test results indicate that the high OER design can further release the performance potential of the PEMFC constrained by heat dissipation while discarding the parasitic power caused by cooling fans. Compared with current PEMFC with low OER by using cooling fans, the temperature distribution variation of PEMFC stack is reduced by 29.8% and the voltage consistency of the single cell at high current density is doubled. The PEMFC with the high OER design exhibits the “current jump” effect, the continuous operating current of PEMFC is increased by 25.0%. The PEMFC net power is increased from 1070 W to 1320 W, and the power density is also increased by 67.8%. Such results provide good reference values for the current PEMFC-powered propulsion system.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Valavanis · 2015
2. A critical review on unmanned aerial vehicles power supply and energy management: solutions, strategies, and prospects10.1016/j.apenergy.2019.113823 ↗
3. Fuel cell propulsion in small fixed-wing unmanned aerial vehicles: current status and research needs10.1016/j.ijhydene.2017.06.148 ↗
4. A review of polymer electrolyte membrane fuel cells: technology, applications, and needs on fundamental research10.1016/j.apenergy.2010.09.030 ↗
5. Performance evaluation and off-design strategy of a high temperature proton exchange membrane fuel cell turbine-less hybrid system for low pressure ratio and Mach number aircraft10.1016/j.jpowsour.2023.232752 ↗
6. Effects of cathode channel size and operating conditions on the performance of air-blowing PEMFCs10.1016/j.apenergy.2013.04.091 ↗
7. Thermal analysis and optimization of a portable, edge-air-cooled PEFC stack10.1016/j.jpowsour.2007.05.079 ↗
8. Cell and stack-level study of steady-state and transient behaviour of temperature uniformity of open-cathode proton exchange membrane fuel cells
9. Computational study of forced air-convection in open-cathode polymer electrolyte fuel cell stacks10.1016/j.jpowsour.2010.02.083 ↗
10. System-level electro-thermal optimisation of air-cooled open-cathode polymer electrolyte fuel cells: air blower parasitic load and schemes for dynamic operation10.1016/j.ijhydene.2015.07.040 ↗
11. Fixed air flow-rate selection by considering the self-regulating function of low power air-cooled PEMFC stack10.1016/j.ijheatmasstransfer.2020.119771 ↗
12. Optimisation of air cooled, open-cathode fuel cells: current of lowest resistance and electro-thermal performance mapping10.1016/j.jpowsour.2015.04.101 ↗
13. Operation characteristics of air-cooled proton exchange membrane fuel cell stacks under ambient pressure10.1016/j.applthermaleng.2013.11.012 ↗
14. Engineering model of a passive planar air breathing fuel cell cathode10.1016/j.jpowsour.2007.01.073 ↗
15. Experimental and theoretical study of thermoelectric generator waste heat recovery model for an ultra-low temperature PEM fuel cell powered vehicle10.1016/j.energy.2019.05.022 ↗
16. Three-dimensional multiphase modeling of the performance of an open-cathode PEM fuel cell with additional cooling channels10.1016/j.energy.2022.125507 ↗
17. Development of a compact high-power density air-cooled proton exchange membrane fuel cell stack with ultrathin steel bipolar plates10.1016/j.energy.2023.126936 ↗
18. Design and control of air supply system for PEMFC UAV based on dynamic decoupling strategy10.1016/j.enconman.2021.115159 ↗
19. Application of self-adaptive temperature recognition in cold-start of an air-cooled proton exchange membrane fuel cell stack10.1016/j.egyai.2022.100155 ↗
20. A kW-level integrated propulsion system for UAV powered by PEMFC with inclined cathode flow structure design10.1016/j.apenergy.2022.120222 ↗
21. On the mechanical principles of the action of propellers
22. On the Part Played in propulsion by differences of fluid pressure
23. Patterson · 2016
24. Proton exchange membrane fuel cells heat recovery opportunities for combined heating/cooling and power applications10.1016/j.enconman.2019.112328 ↗
25. Operating characteristics of an air-cooling PEMFC for portable applications10.1016/j.jpowsour.2005.02.062 ↗
26. Thermal management of edge-cooled 1 kW portable proton exchange membrane fuel cell stack10.1016/j.apenergy.2019.114038 ↗
27. Modeling and dynamic characteristic simulation of a proton exchange membrane fuel cell10.1109/TEC.2008.2011837 ↗
28. Pukrushpan · 2002 · 637
29. Modeling and control of air stream and hydrogen flow with recirculation in a PEM fuel cell system—I. Control-oriented modeling10.1016/j.ijhydene.2006.02.031 ↗
30. Song · 2008 · 1497
31. Optimal estimation of proton exchange membrane fuel cells parameter based on coyote optimization algorithm10.3390/app11052052 ↗
32. An electrochemical-based fuel-cell model suitable for electrical engineering automation approach10.1109/TIE.2004.834972 ↗
33. Effective parameters' identification for polymer electrolyte membrane fuel cell models using grey wolf optimizer10.1016/j.renene.2017.04.036 ↗
34. Parameter optimization of PEMFC model with improved multi-strategy adaptive differential evolution10.1016/j.engappai.2013.07.016 ↗
35. Research progress of proton exchange membrane fuel cells utilizing in high altitude environments10.1016/j.ijhydene.2022.05.238 ↗
36. PEMFC application for aviation: experimental and numerical study of sensitivity to altitude10.1016/j.ijhydene.2012.04.085 ↗
37. Modeling and dynamic characteristic simulation of air-cooled proton exchange membrane fuel cell stack for unmanned aerial vehicle10.1016/j.renene.2022.02.104 ↗
38. Effect of flight level to maximum power utilization for PEMFC/supercapacitor hybrid uav with switched reluctance motor thruster10.1016/j.ijhydene.2022.12.160 ↗
39. Experimental investigation on the mechanism of variable fan speed control in Open cathode PEM fuel cell10.1016/j.ijhydene.2019.07.119 ↗
40. Durability degradation mechanism and consistency analysis for proton exchange membrane fuel cell stack10.1016/j.apenergy.2022.119020 ↗
41. Experimental study on spatiotemporal distribution and variation characteristics of temperature in an open cathode proton exchange membrane fuel cell stack10.1016/j.ijhydene.2019.08.177 ↗
42. Effect of the corrugated bipolar plate design on the self-humidification of a high power density PEMFC stack for UAVs10.1002/fuce.202000163 ↗