First-principles assessment of chemical lithiation of sulfide solid electrolytes and its impact on their transport, electronic and mechanical properties
Source abstract
Abstract
Sulfide-based solid electrolytes (SEs) have received considerable attention, but their practical application is hindered by the lack of chemical stability. When in contact with Li metal, sulfide SEs may undergo decomposition induced by lithiation, which could be largely responsible for the high interfacial impedance observed between them. While the underlying mechanism is still uncertain, this first-principles study examines the structural and compositional evolution of sulfide materials, Li 3PS 4 and Li 10GeP 2S 12, associated with chemical lithiation and its impact on their transport, electronic and mechanical properties. Our calculations demonstrate that the lithiation reaction is thermodynamically favorable until reaching full lithiation in which PS 4 3− and GeS 4 4− tetrahedral anions are completely decomposed to S 2−, P 3- and Ge 4− atomic ions. This process is also found to involve the transition formation of small P(Ge) clusters and more importantly an increase in the relative density which may cause void formation and thus structural failure near the Li metal/SE interface. Moreover, our analyses highlight that, even when fully lithiated, the sulfide materials could retain the high Li-ion conductivity as well as the ability to block electron transport. This suggests that the chemical decomposition of sulfide SEs would not be the only factor that is responsible for the increase of interfacial impedance during electrochemical cycling.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Thermal Expansion and Ionic Conductivity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Building better batteries10.1038/451652a ↗
2. Solid‐State electrolyte design for lithium dendrite suppression10.1002/adma.202002741 ↗
3. High ion conductive Sb2O5-doped β-Li3PS4 with excellent stability against Li for all-solid-state lithium batteries10.1016/j.jpowsour.2018.04.021 ↗
4. In situ SEM study of a lithium deposition and dissolution mechanism in a bulk-type solid-state cell with a Li 2 S–P 2 S 5 solid electrolyte10.1039/c3cp51059j ↗
5. Anomalous high ionic conductivity of nanoporous β-Li3PS410.1021/ja3110895 ↗
6. Direct observation of lithium dendrites inside garnet-type lithium-ion solid electrolyte10.1016/j.elecom.2015.05.001 ↗
7. A bird's-eye view of Li-stuffed garnet-type Li 7 La 3 Zr 2 O 12 ceramic electrolytes for advanced all-solid-state Li batteries10.1039/C9EE01548E ↗
8. Synthesis and properties of NaSICON‐type LATP and LAGP solid electrolytes10.1002/cssc.201900725 ↗
9. Degradation of NASICON-type materials in contact with lithium metal: formation of mixed conducting interphases (MCI) on solid electrolytes10.1021/jp4051275 ↗
10. A lithium superionic conductor10.1038/nmat3066 ↗
11. High-power all-solid-state batteries using sulfide superionic conductors10.1038/nenergy.2016.30 ↗
12. Understanding the effect of interlayers at the thiophosphate solid electrolyte/lithium interface for all-solid-state Li batteries10.1021/acs.chemmater.8b02368 ↗
13. Pre-modified Li3PS4 based interphase for lithium anode towards high-performance Li-S battery10.1016/j.ensm.2017.09.007 ↗
14. Critical current density in solid‐state lithium metal batteries: mechanism, influences, and strategies
15. Enhanced cycle performance of a Li–S battery based on a protected lithium anode10.1039/C4TA04172K ↗
16. Direct observation of the interfacial instability of the fast ionic conductor Li10GeP2S12 at the lithium metal anode10.1021/acs.chemmater.6b00610 ↗
17. Computation-accelerated design of materials and interfaces for all-solid-state lithium-ion batteries10.1016/j.joule.2018.08.017 ↗
18. Mechanism of lithium metal penetration through inorganic solid electrolytes10.1002/aenm.201701003 ↗
19. In situ investigation of chemomechanical effects in thiophosphate solid electrolytes10.1016/j.matt.2020.09.018 ↗
20. Modeling interfaces between solids: application to Li battery materials10.1103/PhysRevB.92.214201 ↗
21. Structures, Li+ mobilities, and interfacial properties of solid electrolytes Li 3 PS 4 and Li 3 PO 4 from first principles10.1103/PhysRevB.88.104103 ↗
22. Exploring interfacial stability of solid-state electrolytes at the lithium-metal anode surface10.1016/j.jpowsour.2018.06.092 ↗
23. First principles study of the Li10GeP2S12 lithium super ionic conductor material10.1021/cm203303y ↗
24. Strategies based on nitride materials chemistry to stabilize Li metal anode10.1002/advs.201600517 ↗
25. Origin of outstanding stability in the lithium solid electrolyte materials: insights from thermodynamic analyses based on first-principles calculations10.1021/acsami.5b07517 ↗
26. First-principles prediction of the electrochemical stability and reaction mechanisms of solid-state electrolytes10.1021/jacsau.1c00228 ↗
27. Clarifying the relationship between redox activity and electrochemical stability in solid electrolytes10.1038/s41563-019-0576-0 ↗
28. Interface stability in solid-state batteries10.1021/acs.chemmater.5b04082 ↗
29. Ab initio molecular dynamics for liquid metals10.1103/PhysRevB.47.558 ↗
30. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
31. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
32. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
33. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
34. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
35. Structure, energetics, and bonding of amorphous Au–Si alloys10.1063/1.2815326 ↗
36. A comparative first-principles study on sodiation of silicon, germanium, and tin for sodium-ion batteries10.1021/acs.jpcc.5b01099 ↗
37. First-principles prediction of anomalously strong phase dependence of transport and mechanical properties of lithium fluoride10.1016/j.actamat.2022.118077 ↗
38. Allen · 2017
39. Li-ion site disorder driven superionic conductivity in solid electrolytes: a first-principles investigation of β-Li 3 PS 410.1039/C6TA07713G ↗
40. New, highly ion‐conductive crystals precipitated from Li2S–P2S5 glasses10.1002/adma.200401286 ↗
41. Preparation of Li3PS4 solid electrolyte using ethyl acetate as synthetic medium10.1016/j.ssi.2015.11.032 ↗
42. Lithium ion conductive oxysulfide, Li3PO4–Li3PS410.1016/j.ssi.2005.03.023 ↗
43. A review of conduction phenomena in Li-ion batteries10.1016/j.jpowsour.2010.06.060 ↗
44. Oxygen-driven transition from two-dimensional to three-dimensional transport behaviour in β-Li 3 PS 4 electrolyte10.1039/C6CP03179J ↗
45. Atomic and electronic structure of superionic solid electrolyte Li10GeP2S1210.1557/opl.2012.1285 ↗
46. Symmetry-general least-squares extraction of elastic data for strained materials from ab initio calculations of stress10.1103/PhysRevB.65.104104 ↗
47. Crystal structures and elastic properties of superhard Ir N 2 and Ir N 3 from first principles
48. The elastic behaviour of a crystalline aggregate10.1088/0370-1298/65/5/307 ↗
49. Elastic properties of alkali superionic conductor electrolytes from first principles calculations10.1149/2.0061602jes ↗
50. Sulfide solid electrolyte with favorable mechanical property for all-solid-state lithium battery10.1038/srep02261 ↗
51. Elastic, plastic, and creep mechanical properties of lithium metal10.1007/s10853-018-2971-3 ↗