A multiscale model validated on local current measurements for understanding the solid oxide cells performances
Source abstract
Abstract
A physical-based model has been developed and validated to unravel the complex relationships between the global solid oxide cells response and the reaction mechanisms taking place in the electrodes. This numerical tool combines three length-scales modules from the electrode microstructure up to the single repeat unit. This model allows computing the local distribution of reaction kinetic rates, current densities, and gas composition as function of the cell operating conditions. To validate the multiscale model, a special setup has been developed to measure the local polarization curves along the cell length. For this purpose, a specific design of the interconnect has been proposed in order to probe the local current density on standard cells. A good agreement has been found between the experimental and simulated data for different operating conditions. The fully validated model has been used to analyze the cell operation in electrolysis and fuel cell modes. The activated reaction pathways associated with the elementary steps in the active layers have been investigated depending on the position along the cell length.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalysis and Oxidation Reactions · Chemical Looping and Thermochemical Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Godula-Jopek · 2015
2. Performance evaluation of a 4-stack solid oxide module in electrolysis mode10.1016/j.ijhydene.2021.11.056 ↗
3. Oxygen electrode degradation in solid oxide cells operating in electrolysis and fuel cell modes: LSCF destabilization and interdiffusion at the electrode/electrolyte interface10.1016/j.ijhydene.2021.07.054 ↗
4. A dynamic multi-scale model for solid oxide cells validated on local current measurements: impact of global cell operation on the electrodes reaction mechanisms10.1149/MA2021-031164mtgabs ↗
5. Addressing planar solid oxide cell degradation mechanisms: a critical review of selected components
6. Optimal control strategies for hydrogen production when coupling solid oxide electrolysers with intermittent renewable energies10.1016/j.jpowsour.2014.06.028 ↗
7. Continuum scale modelling and complementary experimentation of solid oxide cells10.1016/j.pecs.2020.100902 ↗
8. A. Nechache and S. Hody, “Alternative and innovative solid oxide electrolysis cell materials: a short review,” Renew. Sustain. Energy Rev., vol. 149, 2021, doi: 10.1016/j.rser.2021.111322.10.1016/j.rser.2021.111322 ↗
9. Solid oxide electrolysis cell analysis by means of electrochemical impedance spectroscopy : a review10.1016/j.jpowsour.2014.01.110 ↗
10. Strategic research and innovation agenda for RHC, 2013
11. Overview of U.S. Department of energy office of fossil energy's solid oxide fuel cell program10.1149/07801.0003ecst ↗
12. Electrochemical performance and degradation analysis of an SOFC short stack following operation of more than 100,000 hours10.1149/2.0751916jes ↗
13. Degradation of solid oxide electrolysis cells: phenomena, mechanisms, and emerging mitigation strategies—a review10.1016/j.jmst.2019.07.026 ↗
14. Degradation mechanism of La0.6Sr0.4Co0.2Fe0.8O3-δ/Gd0.1Ce0.9O2-δ composite electrode operated under solid oxide electrolysis and fuel cell conditions10.1016/j.electacta.2017.05.011 ↗
15. SOFC characteristics along the flow path10.1016/j.ssi.2006.06.019 ↗
16. Local current measurement in a solid oxide fuel cell repeat element10.1016/j.jeurceramsoc.2006.05.089 ↗
17. Spatial distribution of electrochemical performance in a segmented SOFC: a combined modeling and experimental study10.1002/fuce.200900083 ↗
18. Segmented cell testing for cathode parameter investigation10.1016/j.jpowsour.2010.08.034 ↗
19. Local activation and degradation of electrochemical processes in a SOFC10.1149/05701.0561ecst ↗
20. Reliability of the numerical SOFC models for estimating the spatial current and temperature variations10.1016/j.ijhydene.2016.06.194 ↗
21. A 2-D model for intermediate temperature solid oxide fuel cells preliminarily validated on local values10.3390/catal9010036 ↗
22. Combined Cr and S poisoning in solid oxide fuel cell cathodes10.1016/j.jpowsour.2011.10.123 ↗
23. A quasi 2D model for the interpretation of impedance and polarization of a planar solid oxide fuel cell with interconnects10.1016/j.electacta.2020.137346 ↗
24. Stochastic geometrical modeling of solid oxide cells electrodes validated on 3D reconstructions10.1016/j.commatsci.2017.11.015 ↗
25. Stochastic geometrical and microstructural modeling for solid oxide cell electrodes10.1149/09101.2031ecst ↗
26. Reaction mechanism and impact of microstructure on performances for the LSCF-CGO composite electrode in solid oxide cells10.1002/fuce.201800185 ↗
27. Role of microstructure on electrode operating mechanisms for mixed ionic electronic conductors: from synchrotron-based 3D reconstruction to electrochemical modeling10.1016/j.ssi.2016.07.001 ↗
28. An elementary kinetic model for the LSCF and LSCF-CGO electrodes of solid oxide cells: impact of operating conditions and degradation on the electrode response10.1149/1945-7111/abf40a ↗
29. Physically based impedance modeling of Ni/YSZ cermet anodes10.1149/1.2943411 ↗
30. A detailed kinetic model for the reduction of oxygen on LSCF-GDC composite cathodes10.1016/j.electacta.2020.135620 ↗
31. Modelling of solid oxide steam electrolyser: impact of the operating conditions on hydrogen production10.1016/j.jpowsour.2010.09.054 ↗
32. Effects of pressure on high temperature steam and carbon dioxide Co-electrolysis10.1016/j.electacta.2017.09.037 ↗
33. Multiscale modeling of degradation of full solid oxide fuel cell stacks10.1016/j.ijhydene.2021.05.204 ↗
34. Three-dimensional computational fluid dynamics modelling and experimental validation of the Jülich Mark-F solid oxide fuel cell stack10.1016/j.jpowsour.2017.10.030 ↗
35. A fully-homogenized multiphysics model for a reversible solid oxide cell stack10.1016/j.ijhydene.2019.06.077 ↗
36. Review on modeling development for multiscale chemical reactions coupled transport phenomena in solid oxide fuel cells10.1016/j.apenergy.2009.11.013 ↗
37. Development of a multiscale SOFC model and application to axially-graded electrode design10.1002/fuce.201800170 ↗
38. Modeling elementary heterogeneous chemistry and electrochemistry in solid-oxide fuel cells10.1149/1.2116607 ↗
39. Electrochemical simulation of planar solid oxide fuel cells with detailed microstructural modeling10.1016/j.electacta.2014.08.120 ↗
40. A multiscale approach to the numerical simulation of the solid oxide fuel cell10.3390/catal9030253 ↗
41. Spatially resolved electrochemical performance in a segmented planar SOFC10.1149/1.3142737 ↗
42. Understanding the electrochemical performance of SOFC stacks10.1149/MA2015-03/1/352 ↗
43. Understanding the current-voltage behavior of high temperature solid oxide fuel cell stacks10.1149/2.1541713jes ↗
44. A new framework for physically based modeling of solid oxide fuel cells10.1016/j.electacta.2007.08.030 ↗
45. Strontium migration at the GDC-YSZ interface of solid oxide cells in SOFC and SOEC modes10.1149/MA2017-03/1/299 ↗
46. Serra · 1982
47. Reactive mechanisms of LSCF single-phase and LSCF-CGO composite electrodes operated in anodic and cathodic polarisations10.1016/j.electacta.2015.06.080 ↗
48. Electrode kinetics of porous Ni-3YSZ cermet operated in fuel cell and electrolysis modes for solid oxide cell application10.1016/j.electacta.2021.138765 ↗
49. Modeling electrochemical oxidation of hydrogen on Ni–YSZ pattern anodes10.1149/1.3148331 ↗
50. Efficient correction of wavefront inhomogeneities in X-ray holographic nanotomography by random sample displacement10.1063/1.5026462 ↗
51. Particle-based model for functional and diffusion layers of solid oxide cells electrodes10.1016/j.powtec.2020.03.040 ↗
52. Electrochemical performance of solid oxide fuel cell: experimental study and calibrated model10.1016/j.energy.2017.10.088 ↗
53. Evaluation of SOFC anode polarization simulation using three-dimensional microstructures reconstructed by FIB tomography10.1016/j.electacta.2011.02.010 ↗
54. Exchange current density of solid oxide electrolysis cell electrodes10.1149/MA2021-031282mtgabs ↗
55. Electrochemical model of the integrated planar solid oxide fuel cell (IP-SOFC)10.1016/j.cej.2004.02.005 ↗
56. Hydrogen production through steam electrolysis: model-based steady state performance of a cathode-supported intermediate temperature solid oxide electrolysis cell10.1016/j.jpowsour.2006.12.081 ↗
57. A physically-based modelling to predict the cyclic voltammetry response of LSCF-type electrodes: impact of the Ohmic Losses and Microstructure
58. Stack performances in high temperature steam electrolysis and co-electrolysis10.1016/j.ijhydene.2015.04.085 ↗
59. Parametric study of solid oxide fuel cell performance10.1016/j.enconman.2006.11.016 ↗
60. Solid oxide fuel cells damage mechanisms due to Ni-YSZ re-oxidation: case of the anode supported cell10.1016/j.jpowsour.2009.02.089 ↗
61. Quantitative microstructure characterization of a Ni-YSZ bi-layer coupled with simulated electrode polarisation10.1016/j.jpowsour.2014.01.094 ↗