journal article·2023-02

High thermoelectric performance of spray-coated Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) films enabled by two-step post-treatment process

Yen-Ting Lin, Chia-Yu Lee, Chih-Yao Wu, Jhih-Min Lin, Tai-Chou Lee, Shih-Huang Tung, Cheng-Liang Liu

Publisher page

Abstract

Herein, poly (3,4-ethylenedioxythiophene):poly (styrenesulfonate) (PEDOT:PSS) films with improved thermoelectric properties are fabricated via spray coating followed by a sequential, two-step post-treatment process with ethylene glycol (EG) and a methylammonium iodide (MAI) solution. The EG treatment greatly increases the electrical conductivity of the PEDOT-PSS film up to 1752.1 S cm −1, with an unchanged Seebeck coefficient of 15–17 μV K −1, while the optimal use of 0.05 M MAI in DMSO/DI water for the second step provides a high power factor of 122.3 μW m −1 K −2, along with an increased conductivity of 2226.8 S cm −1 and Seebeck coefficient of 22.8 μV K −1 . Notably, the obtained power factor is among the highest reported for spray-coated polymer-based thermoelectric devices. The performance enhancement is attributed to phase separation of the non-conductive PSS from the PEDOT, the change in chain conformation, the preferential orientation of the PEDOT crystallites, and the manipulation of energy levels. High thermoelectric performance of the as-fabricated PEDOT:PSS on a plastic substrate is established by using a facile proof-of-concept thermoelectric generator to generate a maximum power density of 12.1 nW cm −2 . The fabrication approach developed herein provides an essential paradigm for the production of polymer thermoelectric materials with great potential for application in wearable thermoelectric devices.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials · Advanced Thermoelectric Materials and Devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Thermoelectric properties of pedot:Pss10.1002/aelm.201800769 ↗
2. Controlling electrostatic interaction in pedot:Pss to overcome thermoelectric tradeoff relation10.1002/adfm.201905590 ↗
3. Thermoelectric transport in conductive poly(3,4-ethylenedioxythiophene)
4. Synergistic enhancement of thermoelectric and mechanical performances of ionic liquid litfsi modulated pedot flexible films10.1039/C9TC00310J ↗
5. Anion size effect of ionic liquids in tuning the thermoelectric and mechanical properties of pedot:Pss films through a counterion exchange strategy10.1021/acsami.2c05591 ↗
6. Poly(3,4‐ethylenedioxythiophene): chemical synthesis, transport properties, and thermoelectric devices10.1002/aelm.201800918 ↗
7. Computation-guided design of high-performance flexible thermoelectric modules for sunlight-to-electricity conversion10.1039/D0EE01895C ↗
8. Recent progress on pedot:Pss based polymer blends and composites for flexible electronics and thermoelectric devices10.1039/D0QM00308E ↗
9. Advances in carbon‐based thermoelectric materials for high‐performance, flexible thermoelectric devices10.1002/cey2.121 ↗
10. Recent advances in conducting poly(3,4-ethylenedioxythiophene):Polystyrene sulfonate hybrids for thermoelectric applications10.1039/C8TC01900B ↗
11. Wearable thermoelectric materials and devices for self-powered electronic systems10.1002/adma.202102990 ↗
12. Progress of conjugated polymers as emerging thermoelectric materials10.1016/j.progpolymsci.2022.101548 ↗
13. Solution processed intrinsically conductive polymer films with high thermoelectric properties and good air stability10.1039/C8TA08682F ↗
14. Chemical doping of organic semiconductors for thermoelectric applications10.1039/D0CS00204F ↗
15. Recent progress in tuning polymer oriented microstructures for enhanced thermoelectric performance10.1016/j.nanoen.2020.105448 ↗
16. Flexible thermoelectric materials and devices10.1016/j.apmt.2018.07.004 ↗
17. Achieving efficient n-doping of conjugated polymers by molecular dopants10.1021/acs.accounts.1c00223 ↗
18. Organic-based flexible thermoelectric generators: from materials to devices10.1016/j.nanoen.2021.106774 ↗
19. A review on conductive polymers and their hybrids for flexible and wearable thermoelectric applications
20. Flexible thermoelectric materials and generators: challenges and innovations
21. Highly conducting, transparent pedot:Pss polymer electrodes from post-treatment with weak and strong acids10.1002/aelm.201800654 ↗
22. Higher pedot molecular weight giving rise to higher thermoelectric property of pedot:Pss: a comparative study of clevios p and clevios ph100010.1021/acsami.6b15158 ↗
23. Enhancement of the thermoelectric properties of pedot:Pss thin films by post-treatment10.1039/c3ta11209h ↗
24. In situ observation of morphological and oxidation level degradation processes within ionic liquid post-treated pedot:Pss thin films upon operation at high temperatures10.1021/acsami.2c05745 ↗
25. Ionic liquids as post-treatment agents for simultaneous improvement of seebeck coefficient and electrical conductivity in pedot:Pss films10.1021/acsami.8b21709 ↗
26. Enhancement of thermoelectric performance of pedot:Pss films by post-treatment with a superacid10.1039/C8RA02058B ↗
27. Highly conductive hydrogel polymer fibers toward promising wearable thermoelectric energy harvesting10.1021/acsami.8b15332 ↗
28. Improving the thermoelectric power factor of cnt/pedot:Pss nanocomposite films by ethylene glycol treatment10.1039/C6RA08599G ↗
29. Aggregate structure evolution induced by annealing and subsequent solvent post-treatment for thermoelectric property enhancement of pedot:Pss films10.1016/j.cej.2021.129230 ↗
30. Chemical post-treatment and thermoelectric properties of poly(3,4-ethylenedioxylthiophene):Poly(styrenesulfonate) thin films10.1063/1.4864749 ↗
31. Achieving high thermoelectric performance and metallic transport in solvent‐sheared pedot:Pss10.1002/aelm.202001190 ↗
32. Enhancement of the thermoelectric properties of pedot:Pss via one-step treatment with cosolvents or their solutions of organic salts10.1039/C7TA11148G ↗
33. Significantly enhanced thermoelectric properties of pedot:Pss films through sequential post-treatments with common acids and bases10.1002/aenm.201602116 ↗
34. Enhanced thermoelectric performance of pedot:Pss films by sequential post-treatment with formamide10.1002/mame.201700429 ↗
35. Transparent and flexible organic semiconductor nanofilms with enhanced thermoelectric efficiency10.1039/C4TA00700J ↗
36. Roles of polyethylenimine ethoxylated in efficiently tuning the thermoelectric performance of poly(3,4-ethylenedioxythiophene)-rich nanocrystal films10.1021/acsami.9b00298 ↗
37. Enhanced thermoelectric properties of pedot:Pss nanofilms by a chemical dedoping process10.1039/C3TA14960A ↗
38. Improvement of the thermoelectric properties of pedot:Pss films via dmso addition and dmso/salt post-treatment resolved from a fundamental view10.1016/j.cej.2021.132295 ↗
39. Enhancement of conductivity and thermoelectric property of pedot:Pss via acid doping and single post-treatment for flexible power generator10.1002/adsu.201800085 ↗
40. High-performance pedot:Pss flexible thermoelectric materials and their devices by triple post-treatments10.1021/acs.chemmater.9b01500 ↗
41. Printing thermoelectric inks toward next-generation energy and thermal devices10.1039/D1CS00490E ↗
42. Engineered nanocarbon mixing for enhancing the thermoelectric properties of a telluride-pedot:Pss nanocomposite10.1039/C7TA04280A ↗
43. Spray-printed cnt/p3ht organic thermoelectric films and power generators10.1039/C5TA06096F ↗
44. Enhanced output performance of all-solution-processed organic thermoelectrics: spray printing and interface engineering10.1021/acsami.0c04550 ↗
45. Spray-coated pedot:Otf films: thermoelectric properties and integration into a printed thermoelectric generator10.1039/D0QM00265H ↗
46. Highly conductive pedot:Pss electrode by simple film treatment with methanol for ito-free polymer solar cells10.1039/c2ee22595f ↗
47. Role of the processing solvent on the electrical conductivity of pedot:Pss
48. Poly(sulfobetaine methacrylate)s as electrode modifiers for inverted organic electronics10.1021/ja512148d ↗
49. In-situ modification of pedot:Pss work function using alkyl alcohols as secondary processing solvents and their impact on merocyanine based bulk heterojunction solar cells10.1016/j.orgel.2015.03.008 ↗
50. In‐situ photoelectron spectroscopy study on the air degradation of pedot:Pss in terms of electrical and thermoelectric properties10.1002/aelm.202000620 ↗
51. Semi-metallic polymers10.1038/nmat3824 ↗
52. Effects of cation size on thermoelectricity of pedot:Pss/ionic liquid hybrid films for wearable thermoelectric generator application10.1039/D2TA05134F ↗
53. Secondary electrochemical doping level effects on polaron and bipolaron bands evolution and interband transition energy from absorbance spectra of pedot: pss thin films10.1016/j.synthmet.2016.08.009 ↗
54. On the mechanism of conductivity enhancement in poly(3,4-ethylenedioxythiophene):Poly(styrene sulfonate) film through solvent treatment10.1016/j.polymer.2004.10.001 ↗
55. A general expression for the thermoelectric power10.1016/0038-1098(71)90096-2 ↗
56. Thermoelectric effect of correlated metals: band-structure effects and the breakdown of mott's formula10.1103/PhysRevB.88.115128 ↗
57. Solution synthesis of telluride-based nano-barbell structures coated with pedot:Pss for spray-printed thermoelectric generators10.1039/C5NR07032E ↗
58. Synergistic effect of graphene oxide and wet-chemical hydrazine/deionized water solution treatment on the thermoelectric properties of pedot:Pss sprayed films10.1016/j.synthmet.2016.11.013 ↗
59. Conductive, solution‐processed dioxythiophene copolymers for thermoelectric and transparent electrode applications10.1002/aenm.201900395 ↗
60. Advances in efficient polymerization of solid-state trithiophenes for organic thermoelectric thin-film10.1021/acsapm.9b00842 ↗
61. 3d cellulose fiber networks modified by pedot:Pss/graphene nanoplatelets for thermoelectric applications10.1063/5.0075918 ↗
62. Metallic behaviour of acid doped highly conductive polymers10.1039/C4SC02463J ↗
63. Local order drives the metallic state in pedot:Pss10.1039/C6TC02129H ↗
64. Pedot:Pss films with metallic conductivity through a treatment with common organic solutions of organic salts and their application as a transparent electrode of polymer solar cells10.1021/acsami.6b00317 ↗
65. A wearable all‐fabric thermoelectric generator10.1002/admt.201800615 ↗
66. A textile‐integrated polymer thermoelectric generator for body heat harvesting10.1002/admt.201800708 ↗
67. An efficient pedot-coated textile for wearable thermoelectric generators and strain sensors10.1039/C8TC05906C ↗
68. Synthesis of freestanding pedot:Pss/pva@ag nps nanofiber film for high-performance flexible thermoelectric generator10.1016/j.polymer.2019.01.065 ↗
69. Facile mwcnts-snse/pedot:Pss ternary composite flexible thermoelectric films optimized by cold-pressing10.1016/j.jmrt.2021.10.075 ↗
70. High performance of post-treated pedot:Pss thin films for thermoelectric power generation applications10.1021/acsami.1c13968 ↗