journal article·2022-08

Effect of operating cell voltage on the NaCl poisoning mechanism in polymer electrolyte membrane fuel cells

Sunjin Park, Diana Shorova, Hansung Kim

Publisher page

Abstract

The mechanism of NaCl poisoning in polymer electrolyte membrane fuel cells (PEMFCs) depends on the operating cell voltage. Both the Pt dissolution and the liberation of Cl 2 and CO 2 gases are monitored using an on-line mass spectrometer to differentiate between the different poisoning mechanisms. The changes in the particle size and composition of the catalyst are measured by high-resolution transmission electron microscopy and energy dispersive spectroscopy. At a cell voltage of 0.6 V the degradation of performance due to NaCl poisoning is primarily attributed to blockage of the active sites of the catalyst by the adsorption of Cl −. This reduced performance can be fully restored by removing Cl − in the form of Cl 2 while slowing down the carbon corrosion reaction. However, NaCl poisoning at a high cell voltage of 0.9 V results in Cl −-induced dissolution of the Pt catalyst, which prevents performance recovery. Thus, it has been demonstrated that the NaCl poisoning mechanism and the reversibility of the performance loss depends largely on the operating cell voltage of the PEMFC.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Toyota MIRAI fuel cell vehicle and progress toward a future hydrogen society10.1149/2.F03152if ↗
2. Electrocatalyst approaches and challenges for automotive fuel cells10.1038/nature11115 ↗
3. Poisoning of proton exchange membrane fuel cells by contaminants and impurities: review of mechanisms, effects, and mitigation strategies10.1016/j.jpowsour.2019.03.097 ↗
4. Quantitative ranking criteria for PEMFC contaminants10.1016/j.ijhydene.2012.01.029 ↗
5. Impact of micromolar concentrations of externally-provided chloride and sulfide contaminants on PEMFC reversible stability10.1149/1.2781001 ↗
6. Recovery mechanisms in proton exchange membrane fuel cells after accelerated stress tests10.1016/j.jpowsour.2015.07.063 ↗
7. Sensitivity analyses on the impact of air contaminants on automotive fuel cells10.1002/fuce.201500159 ↗
8. The multiprocess degradation of PEMFC performance due to sulfur dioxide contamination and its recovery10.1149/1.3247546 ↗
9. A mechanism for halogen release from sea-salt aerosol in the remote marine boundary layer10.1038/383327a0 ↗
10. Performance degradation of PEMFC by sea salt aerosol contamination10.1149/08008.0651ecst ↗
11. Effect of cations (Na+, Ca2+, Fe3+) on the conductivity of a Nafion membrane10.1016/j.jpowsour.2010.05.005 ↗
12. Decrease of PEMFC performance by ion contamination10.9713/kcer.2012.50.2.187 ↗
13. PEMFC contamination model: foreign cation exchange with ionomer protons10.1016/j.jpowsour.2011.04.008 ↗
14. PEMFC contaminant tolerance limit - foreign cations in ionomers10.1016/j.ijhydene.2011.01.143 ↗
15. Effects of chloride contamination on PEFCs10.1149/05801.0543ecst ↗
16. Effect of chloride impurities on the performance and durability of polybenzimidazole-based high temperature proton exchange membrane fuel cells10.1016/j.ijhydene.2010.10.076 ↗
17. Degradation of polymer electrolyte fuel cells under the existence of anion species10.1016/j.jpowsour.2008.01.027 ↗
18. Insights into PEMFC performance degradation from HCl in air10.1149/1.3621318 ↗
19. Degradation behavior of membrane – electrode-assembly materials in 10-cell PEMFC stack10.1016/j.ijhydene.2006.02.029 ↗
20. The oxygen reduction reaction on a Pt/carbon fuel cell catalyst in the presence of chloride anions10.1016/S0022-0728(01)00499-5 ↗
21. Structure-relationships in electrocatalysis: oxygen reduction and hydrogen oxidation reactions on Pt(111) and Pt(100) in solutions containing copper ions10.1016/S0022-0728(00)00352-1 ↗
22. Changes in the wettability of polymer electrolyte fuel cells components during cationic contamination and mitigation10.1016/j.ijhydene.2017.06.052 ↗
23. Effect of hydrophobicity of gas diffusion layer in calcium cation contamination in polymer electrolyte fuel cells10.1016/j.ijhydene.2016.06.188 ↗
24. Effect of chloride on PEFCs in presence of various cations10.1149/2.0291504jes ↗
25. Thinning of cathode catalyst layer in polymer electrolyte fuel cells due to foreign cation contamination10.1149/2.0021806jes ↗
26. Effect of cationic contaminants on polymer electrolyte fuel cell performance10.1016/j.jpowsour.2015.03.142 ↗
27. Effect of halogen ions on platinum dissolution under potential cycling in 0.5 M H2SO4 solution10.1016/j.electacta.2007.06.029 ↗
28. Ex situ study of chloride contamination on carbon supported Pt catalyst10.1016/j.jpowsour.2012.01.063 ↗
29. Chloride contamination effects on proton exchange membrane fuel cell performance and durability10.1016/j.jpowsour.2011.04.018 ↗
30. Impacts of operating conditions on the effects of chloride contamination on PEM fuel cell performance and durability10.1016/j.jpowsour.2012.07.003 ↗
31. The effect of NaCl in the cathode air stream on PEMFC performance10.1002/fuce.200600206 ↗
32. Effects of chlorides on the performance of proton exchange membrane fuel cells10.1016/j.ijhydene.2011.01.158 ↗
33. The influence of cell voltage on the performance of a PEM fuel cell in the presence of HCl in air10.1149/2.105403jes ↗
34. Gas diffusion media and NaCl contamination of polymer electrolyte fuel cells for marine applications10.1149/08613.0271ecst ↗
35. Protective oxide layers formed during electrochemical oxidation of hafnium carbide10.1007/s11106-010-9173-0 ↗
36. Evaluation of Cl adsorption in anodic Cl2 evolution at Pt by means of impedance and potential-relaxation experiments. Influence of the state of surface oxidation of the Pt10.1039/ft9918702705 ↗
37. Structure-transport relationship of perfluorosulfonic-acid membranes in different cationic forms10.1016/j.electacta.2016.10.096 ↗
38. Modeling hydrogen starvation conditions in proton-exchange membrane fuel cells10.1016/j.jpowsour.2010.06.038 ↗
39. Carbon support oxidation in PEM fuel cell cathodes10.1016/j.jpowsour.2007.08.053 ↗
40. Effect of operating conditions on carbon corrosion in polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2009.04.006 ↗