3D-printed flexible flow-field plates for bendable polymer electrolyte membrane fuel cells
Source abstract
Abstract
3D-printed flexible flow-field plates are employed in this study to realize a bendable polymer electrolyte membrane fuel cell (PEMFC). The prepared bendable PEMFC consists of a membrane electrode assembly (MEA), current collectors, and flow-field plates. The performance of the fuel cell is measured in the flat and bent positions. Polarization curves and impedance plots are analyzed to assess the fuel cell performance. A peak power density of 87.1 mW cm −2 is obtained for the fuel cell with the maximum bending, while a power density of 30.2 mW cm −2 is obtained in the flat position. The enhanced performance is attributed to the compressive stress applied to the reaction sites of the MEA during bending of the fuel cell. The compressive stress is calculated using finite element analysis (FEA). According to the FEA results, the compressive stress occurring at the MEA intensifies as the curvature of the fuel cell increases, resulting in significantly decreased ohmic and charge transfer resistances. The successfully realized bendable fuel cell with 3D-printed flexible flow-field plates exhibits flexibility, decent performance, and a simple structure. It is also competitive in terms of the cost of manufacturing owing to the use of 3D printing.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Energy density issues of flexible energy storage devices10.1016/j.ensm.2020.03.006 ↗
2. The evolution of flexible electronics: from nature, beyond nature, and to nature10.1002/advs.202001116 ↗
3. Flexible and wearable power sources for next-generation wearable electronics10.1002/batt.202000115 ↗
4. An all-paper, scalable and flexible supercapacitor based on vertically aligned polyaniline (PANI) nano-dendrites@fibers10.1016/j.jpowsour.2021.229886 ↗
5. Flexible supercapacitor electrodes based on real metal-like cellulose papers10.1038/s41467-017-00550-3 ↗
6. Development of a thin flexible Li battery design with a new gel polymer electrolyte operating at room temperature10.1016/j.jpowsour.2020.229055 ↗
7. Directly integrated all-solid-state flexible lithium batteries on polymer substrate10.1016/j.jpowsour.2020.227978 ↗
8. Efficient flexible solar cell based on composition-tailored hybrid perovskite10.1002/adma.201605900 ↗
9. Achieving efficient flexible perovskite solar cells with room-temperature processed tungsten oxide electron transport layer10.1016/j.jpowsour.2019.227157 ↗
10. Flexible direct formate paper fuel cells with high performance and great durability10.1016/j.jpowsour.2021.229526 ↗
11. A review of polymer electrolyte membrane fuel cells: technology, applications, and needs on fundamental research10.1016/j.apenergy.2010.09.030 ↗
12. Combining a proton exchange membrane fuel cell (PEMFC) stack with a Li-ion battery to supply the power needs of a hybrid electric vehicle10.1016/j.renene.2018.06.104 ↗
13. Fuel cells for portable applications10.1016/S0378-7753(01)01069-2 ↗
14. Experimental study of proton exchange membrane fuel cells using Nafion 212 and Nafion 211 for portable application at ambient pressure and temperature conditions10.1016/j.ijhydene.2011.04.233 ↗
15. Flexible fuel cell using stiffness-controlled endplate10.1016/j.ijhydene.2016.02.087 ↗
16. Flexible and lightweight fuel cell with high specific power density10.1021/acsnano.7b01880 ↗
17. A flexible direct methanol micro-fuel cell based on a metalized, photosensitive polymer film10.1016/j.jpowsour.2009.12.092 ↗
18. Pre-bent flow-field plates for enhanced performance in flexible polymer electrolyte membrane fuel cells in curved shape10.1007/s40684-020-00305-4 ↗
19. Bending-durable membrane-electrode assembly using metal nanowires for bendable polymer electrolyte membrane fuel cell10.1016/j.energy.2019.01.123 ↗
20. A rollable ultra-light polymer electrolyte membrane fuel cell10.1038/am.2017.72 ↗
21. High-performance flexible miniature fuel cell10.1149/1.3095682 ↗
22. A flexible portable proton exchange membrane fuel cell10.1016/j.jpowsour.2012.07.054 ↗
23. Bendable polymer electrolyte fuel cell using highly flexible Ag nanowire percolation network current collectors10.1039/c3ta11699a ↗
24. Performance enhancement in bendable fuel cell using highly conductive Ag nanowires10.1016/j.ijhydene.2014.03.017 ↗
25. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges10.1016/j.compositesb.2018.02.012 ↗
26. Polymers for 3D printing and customized additive manufacturing10.1021/acs.chemrev.7b00074 ↗
27. Performance and limitations of 3D-printed bipolar plates in fuel cells10.1149/2.0091504jss ↗
28. 3D-printed fuel-cell bipolar plates for evaluating flow-field performance10.1093/ce/zkaa007 ↗
29. O'Hayre · 2016
30. Examination of compression effects on PEMFC performance by numerical and experimental analyses10.1016/j.ijhydene.2020.04.275 ↗
31. Impact of compressive stress on MEA pore structure and its consequence on PEMFC performance10.1149/2.0291608jes ↗
32. Effect of assembly pressure on the performance of a bendable polymer electrolyte fuel cell based on a silver nanowire current collector10.1016/j.energy.2017.05.197 ↗
33. Mitigation of mechanical membrane degradation in fuel cells – part 1: gas diffusion layers with low surface roughness
34. Mitigation of mechanical membrane degradation in fuel cells – part 2: bonded membrane electrode assembly
35. Mechanical degradation of catalyst layer under accelerated relative humidity cycling in a polymer electrolyte membrane fuel cell10.1016/j.jpowsour.2021.230487 ↗
36. Schweiss · 2016 · 1
37. 2014
38. Numerical and experimental evaluation of hyperelastic material parameters10.1007/978-981-13-1780-4_47 ↗
39. The physics models
40. G. Berselli, R. Vertechy, M. Pellicciari, G. Vassura, Hyperelastic modeling of rubber-like photopolymers for additive manufacturing processes, n.d. www.intechopen.com.
41. A clustered sulfonated poly(ether sulfone) based on a new fluorene-based bisphenol monomer10.1039/c2jm34414a ↗
42. Ex-situ characterisation of gas diffusion layers for proton exchange membrane fuel cells10.1016/j.jpowsour.2012.06.099 ↗
43. A flexible portable proton exchange membrane fuel cell10.1016/j.jpowsour.2012.07.054 ↗