journal article·2022-03Open access

Embedded real-time state observer implementation for lithium-ion cells using an electrochemical model and extended Kalman filter

F.F. Oehler, K. Nürnberger, J. Sturm, A. Jossen

Abstract

Accurate knowledge of the current state of lithium-ion battery cells is crucial for enhanced operational management of battery electric vehicles. Electrochemistry-based models provide the unique ability to predict cell internal states for advanced state monitoring, such as the anode potential, being of great interest for preventing lithium plating during fast charging. Furthermore, they are extendable by electrochemistry-based descriptions of cell degradation mechanisms. However, unlike the widely used equivalent circuit models, they are more computationally expensive and therefore have been scarcely used in embedded systems for online applications. This work addresses an efficient implementation of the popular pseudo-two-dimensional (p2D) electrochemical model in combination with a nonlinear filtering algorithm on a state-of-the-art microcontroller for automotive applications. For the first time, it is shown that with a suitable discretization scheme for the finite-difference approximation, a state observer convergence duration below 40 ms can be achieved for constant current, constant voltage charging at a current rate of 2C, with fast recovery of even local states. The mean relative error of the model internal states is less than 2% compared to an about 15 times slower implementation. This works therefore contributes valuably to demonstrating fast and robust performance of online state estimation using electrochemical models.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced DC-DC Converters

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (73)

Show source-provided references
1. A comprehensive review of battery modeling and state estimation approaches for advanced battery management systems10.1016/j.rser.2020.110015 ↗
2. Advanced battery management strategies for a sustainable energy future: Multilayer design concepts and research trends10.1016/j.rser.2020.110480 ↗
3. Smart cells for embedded battery management
4. State of the art of lithium-ion battery SOC estimation for electrical vehicles10.3390/en11071820 ↗
5. A review of battery state of health estimation methods: Hybrid electric vehicle challenges10.3390/wevj11040066 ↗
6. SoC Estimation for lithium-ion batteries: Review and future challenges10.3390/electronics6040102 ↗
7. Modeling and estimation for advanced battery management10.1146/annurev-control-053018-023643 ↗
8. Implementation of coulomb counting method for estimating the state of charge of lithium-ion battery10.9734/psij/2021/v25i330244 ↗
9. Current trends for state-of-charge (soc) estimation in lithium-ion battery electric vehicles10.3390/en14113284 ↗
10. Physics-informed neural networks for electrode-level state estimation in lithium-ion batteries10.1016/j.jpowsour.2021.230034 ↗
11. Online capacity estimation of lithium-ion batteries with deep long short-term memory networks10.1016/j.jpowsour.2020.228863 ↗
12. Data-driven health estimation and lifetime prediction of lithium-ion batteries: A review10.1016/j.rser.2019.109254 ↗
13. Random forest regression for online capacity estimation of lithium-ion batteries10.1016/j.apenergy.2018.09.182 ↗
14. Critical review of the methods for monitoring of lithium-ion batteries in electric and hybrid vehicles10.1016/j.jpowsour.2014.02.064 ↗
15. Identifiability and parameter estimation of the single particle lithium-ion battery model10.1109/TCST.2018.2838097 ↗
16. Review—dynamic models of li-ion batteries for diagnosis and operation: A review and perspective10.1149/2.1061814jes ↗
17. Battery digital twins: Perspectives on the fusion of models, data and artificial intelligence for smart battery management systems10.1016/j.egyai.2020.100016 ↗
18. Mathematical modeling of porous battery electrodes—Revisit of newman’s model10.1016/j.electacta.2011.01.012 ↗
19. A powerful transmission line model for analysis of impedance of insertion battery cells: A case study on the nmc-li system10.1149/1945-7111/abc769 ↗
20. Bridging physics-based and equivalent circuit models for lithium-ion batteries10.1016/j.electacta.2021.137829 ↗
21. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell10.1149/1.2221597 ↗
22. Simulation and optimization of the dual lithium ion insertion cell10.1149/1.2054684 ↗
23. Parameterization of a physico-chemical model of a lithium-ion battery10.1149/2.0551509jes ↗
24. Parameterization of a physico-chemical model of a lithium-ion battery10.1149/2.0541509jes ↗
25. Full cell parameterization of a high-power lithium-ion battery for a physico-chemical model: Part i. physical and electrochemical parameters10.1149/2.0321816jes ↗
26. Full cell parameterization of a high-power lithium-ion battery for a physico-chemical model: Part ii. thermal parameters and validation10.1149/2.0331816jes ↗
27. Modeling and simulation of inhomogeneities in a 18650 nickel-rich, silicon-graphite lithium-ion cell during fast charging10.1016/j.jpowsour.2018.11.043 ↗
28. Parameter sensitivity analysis of electrochemical model-based battery management systems for lithium-ion batteries10.1016/j.apenergy.2020.115104 ↗
29. Optimal design of experiments for a lithium-ion cell: Parameters identification of an isothermal single particle model with electrolyte dynamics10.1021/acs.iecr.8b04580 ↗
30. A composite single particle lithium-ion battery model through system identification
31. Dynamic aspects of solid solution cathodes for electrochemical power sources10.1149/1.2129269 ↗
32. Cycle life modeling of lithium-ion batteries10.1149/1.1787631 ↗
33. Review of simplified pseudo-two-dimensional models of lithium-ion batteries10.1016/j.jpowsour.2016.07.036 ↗
34. Efficient macro-micro scale coupled modeling of batteries10.1149/1.2032427 ↗
35. Toward real-time simulation of physics based lithium-ion battery models10.1149/1.2776128 ↗
36. Model simplifications and their impact on computational complexity for an electrochemistry-based battery modeling toolbox10.1016/j.jpowsour.2020.229427 ↗
37. Reduction of an electrochemistry-based li-ion battery model via quasi-linearization and padé approximation10.1149/1.3519059 ↗
38. Model-based estimation of lithium concentrations and temperature in batteries using soft-constrained dual unscented kalman filtering10.1109/TCST.2020.2974176 ↗
39. Simplification and order reduction of lithium-ion battery model based on porous-electrode theory10.1016/j.jpowsour.2011.09.034 ↗
40. A reduced-order electrochemical model of li-ion batteries for control and estimation applications10.1109/TVT.2017.2738780 ↗
41. Faster-than-real-time simulation of lithium ion batteries with full spatial and temporal resolution10.1155/2013/268747 ↗
42. A computationally efficient implementation of a full and reduced-order electrochemistry-based model for li-ion batteries10.1016/j.apenergy.2017.09.025 ↗
43. A numerically efficient method of solving the full-order pseudo-2-dimensional (P2D) li-ion cell model10.1016/j.jpowsour.2021.229571 ↗
44. Suitability of physicochemical models for embedded systems regarding a nickel-rich, silicon-graphite lithium-ion battery10.1016/j.jpowsour.2019.226834 ↗
45. Reduced order model for a lithium ion cell with uniform reaction rate approximation10.1016/j.jpowsour.2012.09.013 ↗
46. On-board state estimation in electrical vehicles: Achieving accuracy and computational efficiency through an electrochemical model10.1109/TVT.2020.2966266 ↗
47. A comparative study and review of different kalman filters by applying an enhanced validation method10.1016/j.est.2016.10.004 ↗
48. A state of charge estimator based extended Kalman filter using an electrochemistry-based equivalent circuit model for lithium-ion batteries10.3390/app8091592 ↗
49. Overview of model-based online state-of-charge estimation using Kalman filter family for lithium-ion batteries10.1016/j.rser.2019.06.040 ↗
50. A parameter adaptive method for state of charge estimation of lithium-ion batteries with an improved extended Kalman filter10.1038/s41598-021-84729-1 ↗
51. Lithium-ion battery thermal-electrochemical model-based state estimation using orthogonal collocation and a modified extended kalman filter10.1016/j.jpowsour.2015.07.019 ↗
52. Electrochemical state and internal variables estimation using a reduced-order physics-based model of a lithium-ion cell and an extended kalman filter10.1016/j.jpowsour.2014.11.135 ↗
53. State estimation of lithium-ion cells using a physicochemical model based extended kalman filter10.1016/j.apenergy.2018.04.011 ↗
54. Electrochemical model-based state estimation for lithium-ion batteries with adaptive unscented kalman filter10.1016/j.jpowsour.2020.228534 ↗
55. Haykin · 2001
56. Convergence analysis of a variant of the newton method for solving nonlinear equations10.1016/j.camwa.2009.12.017 ↗
57. Simulation of temperature rise in li-ion cells at very high currents10.1016/j.jpowsour.2014.08.033 ↗
58. Thermal model for a li-ion cell10.1149/1.2817888 ↗
59. Communication—Prediction of thermal issues for larger format 4680 cylindrical cells and their mitigation with enhanced current collection10.1149/1945-7111/abd44f ↗
60. Identification of process and measurement noise covariance for state and parameter estimation using extended kalman filter10.1016/j.jprocont.2011.01.001 ↗
61. 2021
62. IEEE standard for floating-point arithmetic. http://dx.doi.org/10.1109/IEEESTD.2008.4610935.10.1109/IEEESTD.2008.4610935 ↗
63. Attaway · 2009
64. 2019
65. Thorson · 1979
66. Quarteroni · 2007 · vol. 37
67. 2012
68. 2020
69. Modeling of lithium plating and lithium stripping in lithium-ion batteries10.1016/j.jpowsour.2018.12.084 ↗
70. Lithium-ion battery fast charging: A review10.1016/j.etran.2019.100011 ↗
71. Multiscale observation of li plating for lithium-ion batteries10.1007/s12598-021-01730-3 ↗
72. Comparison of the structural and electrochemical properties of layered li[nixcoymnz]o2 (x=1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries10.1016/j.jpowsour.2013.01.063 ↗
73. Transport properties of lipf6-based li-ion battery electrolytes10.1149/1.1872737 ↗