Analysis and optimization for multi-stack vanadium flow battery module incorporating electrode permeability
Source abstract
Abstract
Abstract The large-scale all-vanadium flow battery module is commonly formed by a number of hydraulically parallel connected stacks. The existence of permeability difference in applicated electrode is supposed to be of great influential on module performance. Hence in this paper, the electrode permeability is firstly measured via a self-designed device, followed by an in-depth analysis of its effects by a zero-dimensional dynamic model for multi-stack flow battery module on the basis of mass balance. The simulation results depicted that the permeability variations can notably influence the flow rate, pump loss and overall efficiency for stacks, as well as the voltage uniformity for electrically series connected modules. Besides, the performance, especially the capacity, of electrically series-parallel hybrid multi-stack module can be significantly increased by arranging the stacks with similar electrode permeability in the same branch. In addition, increasing the flow rate, particularly by individual control mode can further increase the module capacity with an acceptably additional efficiency loss. The present study offers not only a full understanding of cardon felt permeability, but also a cost-effective way to evaluate the module performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced battery technologies research · Advanced Battery Technologies Research · Fuel Cells and Related Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Defect chemistry on electrode materials for electrochemical energy storage and conversion10.1002/cnma.202000437 ↗
2. Comoros's energy review for promoting renewable energy sources10.1016/j.renene.2021.01.067 ↗
3. Large scale preparation of 20 cm × 20 cm graphene modified carbon felt for high performance vanadium redox flow battery10.1007/s12274-021-3564-z ↗
4. A critical review on environmental impacts of renewable energy systems and mitigation strategies: wind, hydro, biomass and geothermal10.1016/j.scitotenv.2020.144505 ↗
5. Emerging technologies for green energy conversion and storage10.1002/adsu.202000152 ↗
6. A review on long-term electrical power system modeling with energy storage10.1016/j.jclepro.2020.124298 ↗
7. Redox targeting-based flow batteries10.1088/1361-6463/ab3251 ↗
8. Redox flow batteries: stationary energy storages with potential10.1002/cite.202100001 ↗
9. Redox flow batteries: status and perspective towards sustainable stationary energy storage10.1016/j.jpowsour.2020.228804 ↗
10. Materials, performance, and system design for integrated solar flow batteries - a mini review10.1016/j.apenergy.2020.116210 ↗
11. Application of nanomaterials in aqueous redox flow batteries10.1002/cnma.202100124 ↗
12. Vanadium redox flow batteries: a comprehensive review10.1016/j.est.2019.100844 ↗
13. Vanadium redox flow batteries: a review oriented to fluid-dynamic optimization10.3390/en14010176 ↗
14. An extensive study and analysis of system modeling and interfacing of vanadium redox flow battery10.1002/ente.202000708 ↗
15. Enhancing power density of a vanadium redox flow battery using modified serpentine channels10.1016/j.jpowsour.2021.229753 ↗
16. A transient model for vanadium redox flow batteries with bipolar membranes10.1016/j.jpowsour.2021.229829 ↗
17. Multiple parameter identification using genetic algorithm in vanadium redox flow batteries10.1016/j.jpowsour.2019.227684 ↗
18. cost-effective nafion/lignin composite membrane with low vanadium ion permeation for high performance vanadium redox flow battery10.1016/j.jpowsour.2020.229023 ↗
19. Asymmetric porous polybenzimidazole membranes with high conductivity and selectivity for vanadium redox flow batteries10.1002/ente.202000592 ↗
20. Study on energy loss of 35 kW all vanadium redox flow battery energy storage system under closed-loop flow strategy10.1016/j.jpowsour.2021.229514 ↗
21. A multi-stack simulation of shunt currents in vanadium redox flow batteries10.1016/j.jpowsour.2014.03.054 ↗
22. Model based examination on influence of stack series connection and pipe diameters on efficiency of vanadium redox flow batteries under consideration of shunt currents10.1016/j.jpowsour.2015.01.119 ↗
23. Design trade-offs among shunt current, pumping loss and compactness in the piping system of a multi-stack vanadium flow battery10.1016/j.jpowsour.2015.06.138 ↗
24. Parametric study and flow rate optimization of all-vanadium redox flow batterie10.1016/j.apenergy.2018.06.094 ↗
25. Output feedback control of electrolyte flow rate for Vanadium Redox Flow Batteries10.1016/j.jpowsour.2020.227916 ↗
26. Analysis and optimization of module layout for multi-stack vanadium flow battery module10.1016/j.jpowsour.2019.04.054 ↗
27. Numerical modelling and in-depth analysis of multi-stacks vanadium flow battery module incorporating transport delay10.1016/j.apenergy.2019.04.034 ↗
28. Analysis and optimization of module layout for multi-stack vanadium flow battery module10.1016/j.est.2019.101081 ↗
29. Numerical study on vanadium redox flow battery performance with non-uniformly compressed electrode and serpentine flow field10.1016/j.apenergy.2018.03.058 ↗
30. Experimental study on the performance of a vanadium redox flow battery with non-uniformly compressed carbon felt electrode10.1016/j.apenergy.2018.01.047 ↗
31. The numerical study of vanadium redox flow battery performance with different electrode morphologies and electrolyte inflow patterns10.1016/j.est.2020.101941 ↗
32. Evaluation of the influence of clamping force in electrochemical performance and reliability of vanadium redox flow battery10.1016/j.jpowsour.2019.05.061 ↗
33. Modeling and simulation of vanadium redox flow battery with interdigitated flow field for optimizing electrode architecture10.1149/1945-7111/ab6dd0 ↗
34. Three dimensional multi-physical modeling study of interdigitated flow field in porous electrode for vanadium redox flow battery10.1016/j.jpowsour.2019.227023 ↗
35. A two-dimensional model for the design of flow fields in vanadium redox flow batteries10.1016/j.ijheatmasstransfer.2019.02.008 ↗
36. Blocked serpentine flow field with enhanced species transport and improved flow distribution for vanadium redox flow battery10.1016/j.est.2021.102284 ↗
37. 2D-dynamic phenomenological modelling of vanadium redox flow batteries – analysis of the mass transport related overpotentials10.1016/j.jpowsour.2020.229142 ↗
38. Numerical study on serpentine design flow channel configurations for vanadium redox flow batteries10.1016/j.est.2020.101802 ↗
39. Studies on pressure losses and flow rate optimization in vanadium redox flow battery10.1016/j.jpowsour.2013.09.071 ↗
40. A dynamic plug flow reactor model for a vanadium redox flow battery cell10.1016/j.jpowsour.2016.02.018 ↗
41. Self-assembled polyelectrolyte multilayer modified Nafion membrane with suppressed vanadium ion crossover for vanadium redox flow batteries10.1039/b718526j ↗