journal article·2021-11

Energy, exergy, and eco-environment modeling of proton exchange membrane electrolyzer coupled with power cycles: Application in natural gas pressure reduction stations

Amir Ebrahimi-Moghadam, Mahmood Farzaneh-Gord

Publisher page

Abstract

Abstract This paper focuses on introducing a new configuration of a hybrid system for producing power and hydrogen together with pre-heating natural gas in PRSs. The configuration is based on regenerative Brayton, Rankine and proton exchange membrane electrolyzer cycles. Also, a heat exchanger is embedded for supplying the required heating load of NG pre-heating to prevent hydrate formation. A robust energy, exergy, and eco-environment mathematical model with real assumptions is developed to prove feasibility of the introduced system. To make the study applicable for different PRS capacities, the analyses are done for different equipment sizes during different months of year. The parametric study showed that design variables of the Brayton cycle and pressure of inlet NG are very effective parameters in the design of this proposal. Analyzing the results in different months illustrated that the best performance is achieved in January; so that, 20.25 MW of power, 19.91 MW of heating load, and 11.96 kg/h hydrogen are produced for the optimum equipment variables in this month. At these conditions, the first- and second-law efficiencies and the levelized total costs rate are respectively obtained as 58.91%, 34.02%, and 7.03 $/GJ. Also, the payback period is 6.77 years based on the NPV approach.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hybrid Renewable Energy Systems · Thermodynamic and Exergetic Analyses of Power and Cooling Systems · Advanced Thermodynamic Systems and Engines

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Comparative study of thermally stratified tank using different heat transfer materials for concentrated solar power plant10.1016/j.egyr.2021.06.021 ↗
2. Investigation on part-load performances of combined cooling and power system primed by solid oxide fuel cell with different bottoming cycles10.1016/j.jpowsour.2019.04.095 ↗
3. A review of multiphase energy conversion in wind power generation10.1016/j.rser.2021.111172 ↗
4. Novel designs for the reliability and safety of supercritical water oxidation process for sludge treatment10.1016/j.psep.2020.10.049 ↗
5. Effects of injection timing and EGR on combustion and emissions characteristics of the diesel engine fuelled with acetone–butanol–ethanol/diesel blend fuels10.1016/j.energy.2021.121069 ↗
6. Matching model of energy supply and demand of the integrated energy system in coastal areas10.2112/SI103-205.1 ↗
7. Sensitivity analysis of steam injection parameters of steam injection thermal recovery technology
8. Proposal and parametric analysis of an innovative natural gas pressure reduction and liquefaction system for efficient exergy recovery and LNG storage10.1016/j.energy.2021.120022 ↗
9. Investigating the effect of hydrogen injection on natural gas thermo-physical properties with various compositions10.1016/j.energy.2018.10.186 ↗
10. Energetic, exergetic, environmental and economic assessment of a novel control system for indirect heaters in natural gas city gate stations10.1007/s10973-020-09413-4 ↗
11. Performance assessment of vortex tube and vertical ground heat exchanger in reducing fuel consumption of conventional pressure drop stations10.1016/j.applthermaleng.2016.03.110 ↗
12. Using the potential of energy losses in gas pressure reduction stations for producing power and fresh water10.1016/j.desal.2020.114763 ↗
13. A technical-economic analysis and environmental impact assessment of power recovery at a city gate station: a case study, Energy Sources, Part A Recover
14. A novel expander-depending natural gas pressure regulation configuration: performance analysis10.1016/j.apenergy.2018.03.026 ↗
15. Energy and exergy analysis and multi-criteria optimization of an integrated city gate station with organic Rankine flash cycle and thermoelectric generator10.1016/j.applthermaleng.2018.12.079 ↗
16. Thermodynamic modeling and analysis of a novel heat recovery system in a natural gas city gate station10.1016/j.jclepro.2019.03.167 ↗
17. Energy recovery from natural gas pressure reduction stations: integration with low temperature heat sources10.1016/j.enconman.2017.12.084 ↗
18. A comprehensive analysis of energy and exergy characteristics for a natural gas city gate station considering seasonal variations10.1016/j.energy.2018.05.069 ↗
19. Thermo-mechanical exergy analysis of Marmara Eregli natural gas pressure reduction station (PRS): an application10.1016/j.rser.2017.03.133 ↗
20. Exergetic and economic evaluation of a novel integrated system for trigeneration of power, refrigeration and freshwater using energy recovery in natural gas pressure reduction stations10.1007/s10973-021-10607-7 ↗
21. Investigation of a combined heat and power (CHP) system based on biomass and compressed air energy storage (CAES)10.1016/j.seta.2021.101253 ↗
22. Comprehensive assessment and multi-objective optimization of a green concept based on a combination of hydrogen and compressed air energy storage (CAES) systems10.1016/j.rser.2021.110850 ↗
23. Energy, exergy and economic analysis of utilizing the supercritical CO2 recompression Brayton cycle integrated with solar energy in natural gas city gate station
24. Comprehensive techno-economic and environmental sensitivity analysis and multi-objective optimization of a novel heat and power system for natural gas city gate stations10.1016/j.jclepro.2020.121261 ↗
25. Optimal working conditions of various city gate stations for power and hydrogen production based on energy and eco-exergy analysis10.1016/j.ijhydene.2020.05.110 ↗
26. Optimal design and thermo-economic analysis of an integrated power generation system in natural gas pressure reduction stations10.1016/j.enconman.2019.112079 ↗
27. Energy, exergy, economic and environmental (4E) analysis of using city gate station (CGS) heater waste for power and hydrogen production: a comparative study10.1016/j.ijhydene.2017.11.093 ↗
28. Key performance indicators for integrated natural gas pressure reduction stations with energy recovery10.1016/j.enconman.2018.02.089 ↗
29. Methods of waste heat recovery – a compressor station case study10.1016/j.enconman.2019.111837 ↗
30. The minimum gas temperature at the inlet of regulators in natural gas pressure reduction stations (CGS) for energy saving in water bath heaters10.1016/j.jngse.2014.08.005 ↗
31. Effect of various parameters on indirect fired water bath heaters efficiency to reduce energy losses
32. Optimization of fuel consumption in natural gas city gate station based on gas hydrate temperature (Case study: abbas Abad station)
33. A comprehensive techno-economic analysis and multi-criteria optimization of a compressed air energy storage (CAES) hybridized with solar and desalination units10.1016/j.enconman.2021.114053 ↗
34. Exergy and exergoeconomic analyses of novel high-temperature proton exchange membrane fuel cell based combined cogeneration cycles, including methanol steam reformer integrated with catalytic combustor or parabolic trough solar collector10.1016/j.jpowsour.2020.229277 ↗
35. Exergy & economic analysis of biogas fueled solid oxide fuel cell systems10.1016/j.jpowsour.2014.08.044 ↗
36. Design and multi-criteria optimisation of a trigeneration district energy system based on gas turbine, Kalina, and ejector cycles: exergoeconomic and exergoenvironmental evaluation10.1016/j.enconman.2020.113581 ↗
37. An extensive thermo-economic evaluation and optimization of an integrated system empowered by solar-wind-ocean energy converter for electricity generation – case study: Bandar Abas, Iran10.1016/j.tsep.2021.100965 ↗
38. Performance investigation of a novel hybrid system for simultaneous production of cooling, heating, and electricity10.1016/j.seta.2020.100931 ↗
39. Electrolyzer-fuel cell combination for grid peak load management in a geothermal power plant: power to hydrogen and hydrogen to power conversion10.1016/j.ijhydene.2021.05.082 ↗
40. Proposal and assessment of a novel combined heat and power system: energy, exergy, environmental and economic analysis10.1016/j.enconman.2019.112307 ↗
41. A comparative study between ORC and Kalina based waste heat recovery cycles applied to a green compressed air energy storage (CAES) system10.1016/j.enconman.2020.113203 ↗
42. Energy, exergy, and exergoeconomics (3E) analysis and multi-objective optimization of a multi-generation energy system for day and night time power generation - case study: Dezful city10.1016/j.ijhydene.2020.08.160 ↗
43. Modeling and optimization of multigeneration energy systems
44. Thermodynamic and thermoeconomic analysis and optimization of a novel combined cooling and power (CCP) cycle by integrating of ejector refrigeration and Kalina cycles10.1016/j.energy.2017.07.154 ↗
45. 4E analysis and multi-objective optimization of a CCHP cycle based on gas turbine and ejector refrigeration10.1016/j.applthermaleng.2018.05.075 ↗
46. A comparative thermodynamic analysis of ORC and Kalina cycles for waste heat recovery: a case study for CGAM cogeneration system10.1016/j.csite.2016.11.003 ↗
47. Thin film electrocatalyst layer for unitized regenerative polymer electrolyte fuel cells10.1016/S0378-7753(02)00466-4 ↗
48. Experimental study the impacts of the key operating and design parameters on the cycle-to-cycle variations of the natural gas SI engine10.1016/j.fuel.2020.119976 ↗
49. Thermohydraulic sensitivity analysis and multi-objective optimization of Fe3O4/H2O nanofluid flow inside U-bend heat exchangers with longitudinal strip inserts10.1016/j.applthermaleng.2019.114518 ↗