journal article·2021-07

Single crystal Cu (110) inducing lateral growth of electrodeposition Li for dendrite-free Li metal-based batteries

Chao Shen, Jinlei Gu, Nan Li, Zuling Peng, Keyu Xie

Publisher page

Abstract

Abstract Inducing uniform nucleation and unidirectional growth of lithium (Li) electrodeposition is of vital significance to achieve dendrite-free lithium metal batteries. Herein, a lateral growth model of Li electrodeposition on the single crystal Cu with (110) crystallographic plane is realized. The influence of grain boundaries and crystal grains on the electrodeposition of Li metal and related mechanisms are further explained from the perspective of thermodynamics. The combined simulation and experiment results reveal that the electrodeposited Li grows along (110) crystallographic plane of single crystal Cu foil due to the homogeneous physical and chemical properties surfaces, indicating a typical lateral growth model. With the achieved smooth and flat Li metal electrodeposition layer on the single crystal Cu substrate, the Li|Cu half cell exhibits a high initial Coulombic efficiency of ~98% under different current densities of 0.5 and 1.0 mA cm−2, and Li|NCM523 full cell displays remarkable cycle stability with a high cycle retention of 76.71% even after 300 cycles at the current density of 1 C. This work not only proposes the electrocrystalline growth model of Li metal, but also provides guidance for the commercialization of safe and stable LMBs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Self-heating-induced healing of lithium dendrites10.1126/science.aap8787 ↗
2. Thermodynamic understanding of Li-dendrite formation10.1016/j.joule.2020.06.016 ↗
3. Advancing lithium metal batteries10.1016/j.joule.2018.03.008 ↗
4. Facile synthesis of polypyrrole-modified Li5Cr7Ti6O25 with improved rate performance as negative electrode material for Li-ion batteries10.1016/j.compositesb.2019.03.032 ↗
5. Status and challenges in enabling the lithium metal electrode for high-energy and low-cost rechargeable batteries10.1038/s41560-017-0047-2 ↗
6. Constitutional under-potential plating (CUP)-new insights for predicting the morphological stability of deposited lithium anodes in lithium metal batteries10.1016/j.jpowsour.2020.228243 ↗
7. Low-temperature and high-rate-charging lithium metal batteries enabled by an electrochemically active monolayer-regulated interface10.1038/s41560-020-0640-7 ↗
8. Glassy Li metal anode for high-performance rechargeable Li batteries10.1038/s41563-020-0729-1 ↗
9. Towards a high-performance garnet-based solid-state Li metal battery: a perspective on recent advances10.1016/j.jpowsour.2020.228571 ↗
10. Enabling “lithium-free” manufacturing of pure lithium metal solid-state batteries through in situ plating10.1038/s41467-020-20374-y ↗
11. Lithiophilic Li-Zn alloy modified 3D Cu foam for dendrite-free lithium metal anode10.1016/j.jpowsour.2020.228520 ↗
12. Toward safe lithium metal anode in rechargeable batteries: a review10.1021/acs.chemrev.7b00115 ↗
13. Cotton-derived carbon cloth enabling dendrite-free Li deposition for lithium metal batteries10.1016/j.jpowsour.2020.228291 ↗
14. A liquid electrolyte with de-solvated lithium ions for lithium-metal battery10.1016/j.joule.2020.06.011 ↗
15. Design of a mixed conductive garnet/Li interface for dendrite-free solid lithium metal batteries10.1039/C9EE01903K ↗
16. Accommodating lithium into 3D current collectors with a submicron skeleton towards long-life lithium metal anodes10.1038/ncomms9058 ↗
17. Free-standing copper nanowire network current collector for improving lithium anode performance10.1021/acs.nanolett.6b01581 ↗
18. Synergistic effect of 3D current collectors and ALD surface modification for high coulombic efficiency lithium metal anodes
19. Three-dimensional ordered macroporous Cu current collector for lithium metal anode: uniform nucleation by seed crystal10.1016/j.jpowsour.2018.09.083 ↗
20. Large discrete resistance jump at grain boundary in copper nanowire10.1021/nl101734h ↗
21. In-situ tailored 3D Li2O@Cu nanowires array enabling stable lithium metal anode with ultra-high coulombic efficiency10.1016/j.jpowsour.2020.228178 ↗
22. Normalized lithium growth from the nucleation stage for dendrite-free lithium metal anodes10.1002/anie.201911267 ↗
23. Atomic layer deposition-strengthened lithiophilicity of ultrathin TiO2 film decorated Cu foil for stable lithium metal anode10.1016/j.jpowsour.2020.228157 ↗
24. Reduced-graphene-oxide-guided directional growth of planar lithium layers
25. Simulating dendrite growth in lithium batteries under cycling conditions10.1016/j.jpowsour.2020.228187 ↗
26. Stabilizing lithium metal anode by octaphenyl polyoxyethylene-lithium complexation10.1038/s41467-020-14505-8 ↗
27. Molecular design for electrolyte solvents enabling energy-dense and long-cycling lithium metal batteries10.1038/s41560-020-0634-5 ↗
28. Towards high energy-high power dendrite-free lithium metal batteries: the novel hydrated vanadium oxide/graphene‖silicon nitride/lithium system10.1016/j.jpowsour.2019.02.007 ↗
29. Texture evolution of electroplated copper under various modes of convection. Effect of dissolved oxygen10.1023/A:1020079911268 ↗
30. Understanding and predicting lithium crystal growth on perfect and defective interfaces: a Kohn-Sham density functional study10.1021/acsami.9b10893 ↗
31. Understanding and applying coulombic efficiency in lithium metal batteries10.1038/s41560-020-0648-z ↗
32. Suppressing dendritic lithium formation using porous media in lithium metal-based batteries10.1021/acs.nanolett.8b00183 ↗
33. FSI-inspired solvent and ‘‘full fluorosulfonyl’’ electrolyte for 4 V class lithium-metal batteries10.1039/C9EE02538C ↗
34. Toward dendrite-free lithium deposition via structural and interfacial synergistic effects of 3D graphene@Ni scaffold10.1021/acsami.6b09031 ↗
35. Compact 3D copper with uniform porous structure derived by electrochemical dealloying as dendrite-free lithium metal anode current collector10.1002/aenm.201800266 ↗
36. High performance Li metal anode enabled by robust covalent triazine framework-based protective layer