Sequential focused ion beam scanning electron microscopy analyses for monitoring cycled-induced morphological evolution in battery composite electrodes. Silicon-graphite electrode as exemplary case
Source abstract
Abstract
Abstract In the present work, an alternative to the standard ex-situ and destructive focused ion beam scanning electron microscopy (FIB/SEM) analysis procedure is demonstrated for monitoring the morphological degradation of a single Si/graphite (1/1 mass ratio) blended electrode for Li-ion batteries. For this purpose, a FIB milled microcavity is created in the pristine electrode, which is observed in FIB- polished cross section by SEM at different cycling periods (pristine, 1st, 9th and 50th cycles). This allows studying the same cycled electrode as for an in-situ method. Its cycling-induced morphological change is characterized at the electrode and particle scales by monitoring the evolution of the electrode thickness, mass and porosity, the Si particle morphology, Si interparticle distance, surface fraction and twisting of the graphite flakes. This is correlated to the evolution of the electrode discharge capacity and impedance. As a result, a more comprehensive view of the degradation phenomena of the Si/graphite blended electrode is established.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Extraction and Separation Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Performance and cost of materials for lithium-based rechargeable automotive batteries10.1038/s41560-018-0107-2 ↗
2. Future generations of cathode materials: an automotive industry perspective10.1039/C5TA00361J ↗
3. Lithium-ion batteries – current state of the art and anticipated developments10.1016/j.jpowsour.2020.228708 ↗
4. Alloy negative electrodes for Li-ion batteries10.1021/cr500207g ↗
5. Review Article Si-alloy negative electrodes for Li-ion batteries10.1016/j.coelec.2018.02.002 ↗
6. Challenges and recent progress in the development of Si anodes for lithium-ion battery10.1002/aenm.201700715 ↗
7. Colossal reversible volume changes in lithium alloys10.1149/1.1388178 ↗
8. The failure mechanism of nano-sized Si-based negative electrodes for lithium-ion batteries10.1039/c1jm10213c ↗
9. Dynamics of the morphological degradation of Si-based anodes for Li-ion batteries characterized by in-situ synchrotron X-ray tomography10.1002/aenm.201803947 ↗
10. The design of a Li-ion full cell battery using a nano silicon and nano multi-layer graphene composite anode,10.1016/j.jpowsour.2013.10.087 ↗
11. Understanding capacity fade in silicon based electrodes for lithium-ion batteries using three electrode cells and upper cut-off voltage studies10.1016/j.jpowsour.2015.10.066 ↗
12. Research progress on silicon/carbon composite anode materials for lithium-ion battery10.1016/j.jechem.2017.12.012 ↗
13. Study of styrene butadiene rubber and sodium methyl cellulose as binder for negative electrodes in lithium-ion batteries10.1016/j.jpowsour.2006.03.073 ↗
14. Cycling behavior of silicon-containing graphite electrodes, Part B: effect of the silicon source10.1021/acs.jpcc.7b08457 ↗
15. Cycle-dependent microstructural changes of silicon-carbon composite anodes for lithium-ion batteries10.1002/bkcs.11660 ↗
16. Morphological changes of silicon nanoparticles and the influence of cutoff potentials in silicon-graphite electrodes10.1149/2.1261807jes ↗
17. Quantification and modeling of mechanical degradation in lithium-ion batteries based on nanoscale imaging10.1038/s41467-018-04477-1 ↗
18. Multimodal nanoscale tomographic imaging for battery electrodes10.1002/aenm.201904119 ↗
19. V.Schmidt, V. Wood, Quantifying microstructural dynamics and electrochemical activity of graphite and silicon-graphite lithium ion battery anodes10.1038/ncomms12909 ↗
20. Hernandez · 2017
21. Fiji: an open-source platform for biological-image analysis10.1038/nmeth.2019 ↗
22. New insights into the silicon-based electrode's irreversibility along cycle life through simple gravimetric method10.1016/j.jpowsour.2012.08.007 ↗
23. A comparative study of polyacrylic acid (PAA) and carboxymethyl cellulose (CMC) binders for Si-based electrodes, Electrochim
24. An in situ X-ray diffraction study of the reaction of Li with crystalline Si10.1149/1.2409862 ↗
25. Revealing lithium–silicide phase transformations in nano-structured silicon-based lithium ion batteries via in situ NMR spectroscopy10.1038/ncomms4217 ↗
26. Simultaneous measurements and modeling of the electrochemical impedance and the cyclic voltammetric characteristics of graphite electrodes doped with lithium10.1021/jp9701909 ↗
27. Operando quantification of (De)Lithiation behavior of silicon–graphite blended electrodes for lithium-ion batteries10.1002/aenm.201803380 ↗
28. Impedance analysis of silicon nanowire lithium ion battery anodes10.1021/jp901594g ↗
29. Understanding interfacial impedance growth in porous electrodes containing blended active materials10.1016/j.jpowsour.2019.226955 ↗
30. Effects of mechanical compression on the aging and the expansion behavior of Si/C-Composite|NMC811 in different lithium-ion battery cell formats10.1149/2.1121915jes ↗
31. In situ TEM of two-phase lithiation of amorphous silicon nanospheres10.1021/nl3044508 ↗
32. Size-dependent fracture of silicon nanoparticles during lithiation10.1021/nn204476h ↗
33. Promise and reality of post post-lithium-ion batteries with high energy densities10.1038/natrevmats.2016.13 ↗
34. Failure mechanisms of nano-silicon anodes upon cycling: an electrode porosity evolution model10.1039/C4CP02324B ↗
35. In situ characterization of Si-based anodes by coupling synchrotron X-ray tomography and diffraction10.1016/j.nanoen.2018.11.079 ↗
36. Threshold-like dependence of silicon-based electrode performance on active mass loading and nature of carbon conductive additive10.1016/j.electacta.2016.08.118 ↗