Afterburner temperature safety assessment for solid oxide fuel cell system based on computational fluid dynamics
Source abstract
Abstract
Abstract As an energy conversion and generation device that converts hydrogen energy into electrical energy, the solid oxide fuel cell is one of the most promising fuel cells. However, thermal stability is the major reason for the shortened solid oxide fuel cell lifetime of hybrid electric vehicles usage. In existing solid oxide fuel cell system, the peak temperature occurs in the afterburner, so the thermal safety assessment is very important for solid oxide fuel cell stack. In this paper, afterburner thermal performance of natural gas solid oxide fuel cell system is studied based on computational fluid dynamics simulation. The model is analysed by changing gas temperature, gas flow velocity, gas composition ratio and steam to carbon ratio. The afterburner temperature distribution and its safety characteristics are obtained through model analysis. The simulation and discussion results can guide the thermoelectric safety assessment and controller design of the SOFC system.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Chemical Looping and Thermochemical Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Extended-range electric vehicle-oriented thermoelectric surge control of a solid oxide fuel cell system10.1016/j.apenergy.2020.114628 ↗
2. Fault-tolerant control for steam fluctuation in SOFC system with reforming units10.1016/j.ijhydene.2019.07.007 ↗
3. Reformer faults in SOFC systems: experimental and modeling analysis, and simulated fault maps10.1016/j.ijhydene.2014.09.063 ↗
4. Evaluation of the thermal and structural stability of planar anode-supported solid oxide fuel cells using a 10 x 10 cm(2) single-cell test10.1016/j.ijhydene.2018.08.099 ↗
5. Parameters and their impacts on the temperature distribution and thermal gradient of solid oxide fuel cell10.1016/j.apenergy.2019.03.034 ↗
6. Performance investigation of a micro-tubular flame-assisted fuel cell stack with 3,000 rapid thermal cycles10.1016/j.jpowsour.2018.05.060 ↗
7. Porous Ni-Fe alloys as anode support for intermediate temperature solid oxide fuel cells: I. Fabrication, redox and thermal behaviors10.1016/j.jpowsour.2014.10.165 ↗
8. Thermal cycling and electrochemical characteristics of solid oxide fuel cell supported on stainless steel with a new 3-phase composite anode10.1016/j.jpowsour.2017.04.022 ↗
9. Thermal stress analysis of sulfur deactivated solid oxide fuel cells10.1016/j.jpowsour.2018.01.011 ↗
10. Experimental investigation into performance of integrated hotbox in 1-kW solid oxide fuel cell system10.1080/15435075.2015.1087852 ↗
11. Design of SOFC based oxyfuel combustion systems with anode recycling and steam recycling options10.1016/j.enconman.2017.09.023 ↗
12. Sanjay, Computational analysis of IR-SOFC: thermodynamic, electrochemical process and flow configuration dependency10.1016/j.ijhydene.2015.10.098 ↗
13. 3D thermo-electro-chemo-mechanical coupled modeling of solid oxide fuel cell with double-sided cathodes10.1016/j.ijhydene.2019.10.139 ↗
14. A three-dimensional model for transient performance of a solid oxide fuel cell10.1016/j.ijhydene.2014.01.207 ↗
15. Three-dimensional nonisothermal modeling of solid oxide fuel cell coupling electrochemical kinetics and species transport
16. Analyzing different planar biogas-fueled SOFC stack designs and their effects on the flow uniformity10.1016/j.energy.2019.116450 ↗
17. Control of solid oxide fuel cells damage using infrared thermography10.1016/j.ijhydene.2018.04.222 ↗
18. Simulation of SOFC performance using a modified exchange current density for pre-reformed methane-based fuels10.1016/j.ijhydene.2019.12.089 ↗
19. Real-time implementation of maximum net power strategy based on sliding mode variable structure control for proton-exchange membrane fuel cell system10.1109/TTE.2020.2970835 ↗
20. A state machine control based on equivalent consumption minimization for fuel cell/supercapacitor hybrid tramway10.1109/TTE.2019.2915689 ↗
21. Experimental investigation of 1kW solid oxide fuel cell system with a natural gas reformer and an exhaust gas burner10.1016/j.jpowsour.2009.09.021 ↗
22. A nonlinear sliding mode observer for the estimation of temperature distribution in a planar solid oxide fuel cell10.1016/j.ijhydene.2014.10.117 ↗
23. Control-oriented fault detection of solid oxide fuel cell system unknown input on fuel supply10.1002/asjc.2014 ↗
24. CFD simulation tool for solid oxide fuel cells10.1016/j.jpowsour.2003.11.089 ↗
25. A 3D CFD model for predicting the temperature distribution in a full scale APU SOFC short stack under transient operating conditions10.1016/j.apenergy.2014.08.052 ↗
26. Controlling reformation rate for a more uniform temperature distribution in an internal methane steam reforming solid oxide fuel cell10.1016/j.jpowsour.2020.228310 ↗
27. A 3D multiphysics model and its experimental validation for predicting the mixing and combustion characteristics of an afterburner10.1016/j.ijhydene.2015.05.103 ↗
28. Fault detection and assessment for solid oxide fuel cell system gas supply unit based on novel principal component analysis10.1016/j.jpowsour.2019.226864 ↗
29. Mechanism model-based and data-driven approach for the diagnosis of solid oxide fuel cell stack leakage10.1016/j.apenergy.2021.116508 ↗