journal article·2021-01

Dually modified cathode-electrolyte interphases layers by calcium phosphate on the surface of nickel-rich layered oxide cathode for lithium-ion batteries

Hye Ji Song, Seong Ho Oh, Yongho Lee, Jeonghan Kim, Taeeun Yim

Publisher page

Abstract

Abstract Improvement of the interfacial stability of layered nickel-rich cathode materials by surface modification is investigated using calcium phosphate as a coating precursor. The surface modification procedure allows the formation of artificially induced cathode-electrolyte interphases with residual lithium species remaining on the surface of nickel-rich cathode materials. Surface modification increases the particle hardness of the cathode materials by increasing their mechanical properties through strong binding of calcium ions with oxygen elements. In addition, artificially induced cathode-electrolyte interphases prevent electrolyte decomposition on the surface of the nickel-rich cathode materials, thereby affording improved the cycling retention at high temperatures. The cell cycled with surface-modified nickel-rich cathode materials exhibits a cycling retention of 72.5%, whereas the cell cycled with unmodified nickel-rich cathode materials shows rapid fading of cycling retention (39.9%) at high temperature. Additional systematic analyses, performed by scanning electron microscopy, transmission electron microscopy, electrochemical impedance spectroscopy, X-ray photoelectron spectroscopy, and inductively coupled plasma optical emission spectrometry, indicate that the undesired surface reactions are effectively inhibited on the modified cathode during electrochemical charging/discharging processes in the cell, resulting in improved electrochemical performances, such as cycling retention and rate capabilities.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. The polyacrylic latex: an efficient water-soluble binder for LiNi1/3Co1/3Mn1/3O2 cathode in li-ion batteries10.1007/s10008-015-2967-8 ↗
2. Chemical, structural, and electronic aspects of formation and degradation behavior on different length scales of Ni‐rich NCM and Li‐rich HE‐NCM cathode materials in Li‐ion batteries10.1002/adma.201900985 ↗
3. Improving the electrochemical performances using a V-doped Ni-rich NCM cathode10.1038/s41598-019-45556-7 ↗
4. Electron spectroscopy study of Li[Ni,Co,Mn]O2/electrolyte interface: electronic structure, interface composition, and device implications10.1021/cm5047534 ↗
5. Investigating the reversibility of structural modifications of LixNiyMnzCo1–y–zO2 cathode materials during initial charge/discharge, at multiple length scales10.1021/acs.chemmater.5b02457 ↗
6. Nickel-rich and lithium-rich layered oxide cathodes: progress and perspectives10.1002/aenm.201501010 ↗
7. Enhanced electrochemical performance of ZrO2 modified LiNi0.6Co0.2Mn0.2O2 cathode material for lithium ion batteries10.1016/j.ceramint.2017.08.048 ↗
8. Molecular surface modification of NCM622 cathode material using organophosphates for improved Li-ion battery full-cells10.1021/acsami.8b04405 ↗
9. Ultrathin CeO2 coating for improved cycling and rate performance of Ni-rich layered LiNi0.7Co0.2Mn0.1O2 cathode materials10.1016/j.ceramint.2018.09.145 ↗
10. Design of nickel-rich layered oxides using Electronic donor for redox reactions10.1021/acs.chemmater.5b02697 ↗
11. Enhanced electrochemical properties of lithium-reactive V2O5 coated on the LiNi0.8Co0.1Mn0.1O2 cathode material for lithium ion batteries at 60°C
12. Surface-coated LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode materials by Al2O3, ZrO2, and Li2O-2B2O3 thin-layers for improving the performance of lithium ion batteries10.3389/fmats.2019.00309 ↗
13. Extracting maximum capacity from Ni-rich Li[Ni0.95Co0.025Mn0.025]O2 cathodes for high-energy-density lithium-ion batteries
14. A method of increasing the energy density of layered Ni-rich Li[Ni1−2xCoxMnx]O2 cathodes (x = 0.05, 0.1, 0.2)
15. Tungsten doping for stabilization of Li[Ni0.90Co0.05Mn0.05]O2 cathode for Li-ion battery at high voltage10.1016/j.jpowsour.2019.227242 ↗
16. Effect of additives on electrochemical performance of lithium nickel cobalt manganese oxide at high temperature10.1016/j.jpowsour.2013.12.024 ↗
17. CeVO4-coated LiNi0.6Co0.2Mn0.2O2 as positive material: towards the excellent electrochemical performance at normal and high temperature10.1007/s10854-018-9673-0 ↗
18. Capacity fading of Ni-rich Li[NixCoyMn1–x–y]O2 (0.6 ≤ x ≤ 0.95) cathodes for high-energy-density lithium-ion batteries: bulk or surface degradation?10.1021/acs.chemmater.7b05269 ↗
19. Cyclic aminosilane-based additive ensuring stable electrode–electrolyte interfaces in Li-ion batteries10.1002/aenm.202000012 ↗
20. Thiophene-initiated polymeric artificial cathode-electrolyte interface for Ni-rich cathode material10.1016/j.electacta.2018.09.103 ↗
21. Sulfonate-based artificial cathode–electrolyte interface to enhance electrochemical performance of Ni-rich layered oxide cathode materials10.1021/acssuschemeng.0c00404 ↗
22. Distinct reaction characteristics of electrolyte additives for high-voltage lithium-ion batteries: tris (trimethylsilyl) phosphite, borate, and phosphate10.1016/j.electacta.2016.08.131 ↗
23. Electrochemical performance and thermal stability analysis of LiNixCoyMnzO2 cathode based on a composite safety electrolyte10.1016/j.jhazmat.2018.03.015 ↗
24. Significantly improving cycling performance of cathodes in lithium ion batteries: the effect of Al2O3 and LiAlO2 coatings on LiNi0.6Co0.2Mn0.2O210.1016/j.nanoen.2017.11.010 ↗
25. Ultrathin ZnO coating for improved electrochemical performance of LiNi0.5Co0.2Mn0.3O2 cathode material10.1016/j.jpowsour.2014.05.027 ↗
26. Enhancement in the electrochemical performance of zirconium/phosphate bi-functional coatings on LiNi0.8Co0.15Mn0.05O2 by the removal of Li residuals10.1039/C6CP05286J ↗
27. Selective TiO2 nanolayer coating by polydopamine modification for highly stable Ni-rich layered oxides10.1002/cssc.201902998 ↗
28. Enhanced electrochemical performance of LiNi0.8Co0.1Mn0.1O2 cathode via wet-chemical coating of MgO10.1007/s10008-019-04308-3 ↗
29. Triisopropyl borate as an electrolyte additive for improving the high voltage stability of LiNi0.6Co0.2Mn0.2O2 cathode10.1016/j.jelechem.2019.113506 ↗
30. Enhancing the high voltage interface compatibility of LiNi0.5Co0.2Mn0.3O2 in the succinonitrile-based electrolyte10.1016/j.electacta.2018.12.104 ↗
31. Aminoalkyldisiloxane as effective electrolyte additive for improving high temperature cycle life of nickel-rich LiNi0.6Co0.2Mn0.2O2/graphite batteries10.1016/j.jpowsour.2020.228099 ↗
32. Thermochemical conversion of eggshell as biological waste and its application as a functional material for lithium-ion batteries10.1016/j.cej.2019.04.171 ↗
33. Critical role of corrosion inhibitors modified by silyl ether functional groups on electrochemical performances of lithium manganese oxides10.1016/j.jechem.2020.02.029 ↗
34. Intragranular cracking as a critical barrier for high-voltage usage of layer-structured cathode for lithium-ion batteries10.1038/ncomms14101 ↗
35. Preparation of aluminium calcium oxide composite material using stir casting method and testing of its mechanical properties
36. Effect of CaO addition on high temperature tensile properties of Mg casting alloys10.4028/www.scientific.net/MSF.620-622.291 ↗
37. Degradation mechanism of highly Ni-rich Li[NixCoyMn1–x–y]O2 cathodes with x > 0.910.1021/acsami.9b09754 ↗
38. Revisiting primary particles in layered lithium transition-metal oxides and their impact on structural degradation10.1002/advs.201800843 ↗
39. In-situ formation of hybrid Li3PO4-AlPO4-Al(PO3)3 coating layer on LiNi0.8Co0.1Mn0.1O2 cathode with enhanced electrochemical properties for lithium-ion battery10.1016/j.cej.2019.122959 ↗
40. Facile and efficient fabrication of Li3PO4-coated Ni-rich cathode for high-performance lithium-ion battery10.1016/j.apsusc.2019.144506 ↗
41. Ionic conductivity of bias sputtered lithium phosphorus oxy-nitride thin films10.1016/j.ssi.2016.01.046 ↗
42. Red-emission enhancement of the CaAlSiN3: Eu2+ phosphor by partial substitution for Ca3N2 by CaCO3 and excess calcium source addition10.1039/C5RA14320A ↗
43. Microstructural degradation of Ni-rich Li[NixCoyMn1−x−y]O2 cathodes during accelerated calendar aging10.1002/smll.201803179 ↗
44. Mechanism of capacity fading in the LiNi0.8Co0.1Mn0.1O2 cathode material for lithium-ion batteries10.3390/en12091638 ↗
45. Improving the electrochemical properties of LiNi0.5Co0.2Mn0.3O2 at 4.6 V cutoff potential by surface coating with Li2TiO3 for lithium-ion batteries10.1039/C5CP05319F ↗
46. Unveiling the impact of the polypyrrole coating layer thickness on the electrochemical performances of LiNi0.5Co0.2Mn0.3O2 in Li–ion battery
47. Improved electrochemical performance and thermal stability of Li-excess Li1.18Co0.15Ni0.15Mn0.52O2 cathode material by Li3PO4 surface coating10.1016/j.electacta.2015.06.085 ↗
48. Revealing mechanism of Li3PO4 coating suppressed surface oxygen release for commercial Ni-rich layered cathodes10.1021/acsaem.0c00859 ↗
49. Post mortem analysis of fatigue mechanisms in LiNi0.8Co0.15Al0.05O2–LiNi0.5Co0.2Mn0.3O2–LiMn2O4/graphite lithium ion batteries10.1016/j.jpowsour.2016.07.010 ↗
50. Origin of capacity increasing in a long‐life ternary Sn–Fe3O4@ graphite anode for Li‐ion batteries10.1002/admi.201700113 ↗
51. Artificial cathode-electrolyte interphases on nickel-rich cathode materials modified by silyl functional group10.1016/j.jpowsour.2019.01.050 ↗
52. Constructing a protective interface film on layered lithium-rich cathode using an electrolyte additive with special molecule structure10.1021/acsami.6b09554 ↗
53. A new anion receptor for improving the interface between lithium- and manganese-rich layered oxide cathode and the electrolyte10.1021/acs.chemmater.6b04784 ↗
54. Understanding the origin of high corrosion inhibition efficiency of bee products towards aluminium alloys in alkaline environments10.1016/j.electacta.2019.03.012 ↗
55. Effects of different electrode materials on the performance of lithium tetrafluorooxalatophosphate (LiFOP) electrolyte10.1016/j.jpowsour.2011.04.061 ↗
56. Succinonitrile as a high-voltage additive in the electrolyte of LiNi0.5Co0.2Mn0.3O2/graphite full batteries10.1002/sia.6744 ↗
57. Unraveling transition metal dissolution of Li1.04Ni1/3Co1/3Mn1/3O2 (NCM 111) in lithium ion full cells by using the total reflection X-ray fluorescence technique10.1016/j.jpowsour.2016.08.099 ↗
58. Roles of Al-doped ZnO (AZO) modification layer on improving electrochemical performance of LiNi1/3Co1/3Mn1/3O2 thin film cathode10.1007/s11581-017-2111-0 ↗