Revealing inhomogeneities in electrode lithiation using a real-time discrete electro-chemical model
Source abstract
Abstract
Abstract Transmission line-or mixed conducting network models are a widely used model category for the characterization of porous electrodes in the frequency domain. Their benefits in time domain modeling and simulation are strongly underestimated as the transfer function of the model's impedance cannot be transformed into the time domain analytically. Instead, spatial discretization is required, which leads to a differential-algebraic equation system. This allows for a spatial resolution of the porous electrode and for the investigation of local phenomena. Therefore, the introduced model is considered a discrete electrochemical model. In this study, we efficiently solve the differential-algebraic equation system using a linear-implicit method. The time-domain model of a graphitic anode is parametrized based on frequency domain impedance measurement data. The validity of the parameter transformation is shown in low- and high-dynamic test profiles, for a wide range of the degree of lithiation of the negative electrode. Finally, the parametrized model is used for the prediction of lithium deposition during charging at various C-rates. The comparison with a standard-equivalent circuit model reveals that the discrete electrochemical model is capable of detecting local Li plating due to the spatial resolution and is significantly more sensitive. Hence, real-time capable transmission line models are applicable for sophisticated fast charging controls.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Advanced machine learning approach for lithium-ion battery state estimation in electric vehicles10.1109/TTE.2015.2512237 ↗
2. Performance analysis of machine-learning approaches for modeling the charging/discharging profiles of stationary battery systems with non-uniform cell aging10.3390/batteries3020018 ↗
3. Impedance based time-domain modeling of lithium-ion batteries: Part i10.1016/j.jpowsour.2018.01.043 ↗
4. Modeling of lixfepo4 cathode li-ion batteries using linear electrical circuit model10.1109/TSTE.2013.2267752 ↗
5. A consistent derivation of the impedance of a lithium-ion battery electrode and its dependency on the state-of-charge10.1016/j.electacta.2017.05.009 ↗
6. Analysis of lithium-ion battery models based on electrochemical impedance spectroscopy10.1002/ente.201600154 ↗
7. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell10.1149/1.2221597 ↗
8. Simulation and optimization of the dual lithium ion insertion cell10.1149/1.2054684 ↗
9. Long-term equalization effects in li-ion batteries due to local state of charge inhomogeneities and their impact on impedance measurements10.1016/j.electacta.2015.10.108 ↗
10. Solid-state diffusion limitations on pulse operation of a lithium ion cell for hybrid electric vehicles10.1016/j.jpowsour.2006.03.050 ↗
11. Computer simulations of the impedance response of lithium rechargeable batteries10.1149/1.1393162 ↗
12. An electrochemical modeling of lithium-ion battery nail penetration10.1016/j.jpowsour.2013.11.069 ↗
13. Simulation of temperature rise in li-ion cells at very high currents10.1016/j.jpowsour.2014.08.033 ↗
14. Simulating high current discharges of power optimized li-ion cells10.1149/2.094310jes ↗
15. Suitability of physicochemical models for embedded systems regarding a nickel-rich, silicon-graphite lithium-ion battery10.1016/j.jpowsour.2019.226834 ↗
16. Simultaneous measurements and modeling of the electrochemical impedance and the cyclic voltammetric characteristics of graphite electrodes doped with lithium10.1021/jp9701909 ↗
17. Model order reduction for solid-phase diffusion in physics-based lithium ion cell models10.1016/j.jpowsour.2012.07.007 ↗
18. Modeling of lithium ion cells: a simple equivalent-circuit model approach10.1016/j.ssi.2004.09.049 ↗
19. Intercalation of lithium ions into graphite electrodes studied by ac impedance measurements10.1149/1.1392010 ↗
20. Parameterization of battery electrothermal models coupled with finite element flow models for cooling10.1115/1.4035742 ↗
21. Determination of diffusion coefficients using impedance spectroscopy data10.1149/2.1151814jes ↗
22. Impedance-based simulation models for energy storage devices in advanced automotive power systems: Zugl
23. Tracking of electrochemical impedance of batteries10.1016/j.jpowsour.2016.02.006 ↗
24. A scalable active battery management system with embedded real-time electrochemical impedance spectroscopy10.1109/TPEL.2016.2607519 ↗
25. A comparative study and validation of state estimation algorithms for li-ion batteries in battery management systems10.1016/j.apenergy.2015.05.102 ↗
26. Online model-based estimation of state-of-charge and open-circuit voltage of lithium-ion batteries in electric vehicles10.1016/j.energy.2012.01.009 ↗
27. A comprehensive review of on-board state-of-available-power prediction techniques for lithium-ion batteries in electric vehicles10.1016/j.jpowsour.2016.08.031 ↗
28. A novel on-board state-of-charge estimation method for aged li-ion batteries based on model adaptive extended kalman filter10.1016/j.jpowsour.2013.06.108 ↗
29. Optimized process parameters for a reproducible distribution of relaxation times analysis of electrochemical systems10.3390/batteries5020043 ↗
30. Generalized distribution of relaxation times analysis for the characterization of impedance spectra10.3390/batteries5030053 ↗
31. Deconvolution of electrochemical impedance spectra for the identification of electrode reaction mechanisms in solid oxide fuel cells10.1023/A:1020599525160 ↗
32. Time-domain simulation of n coupled transmission lines10.1109/TMTT.1987.1133615 ↗
33. A simple introduction to the transmission-line modeling10.1109/31.56072 ↗
34. Time-domain model for multiconductor power transmission lines10.1049/ip-gtd:19982001 ↗
35. On porous electrodes in electrolyte solutions10.1016/0013-4686(63)80042-0 ↗
36. Stromverteilung in porösen elektroden10.1016/0013-4686(60)80025-4 ↗
37. Couple axial gradients of potential and concentration in a cylindrical pore electrode: an impedance model10.1016/0022-0728(85)80002-4 ↗
38. A powerful electrical network model for the impedance of mixed conductors10.1016/S0013-4686(99)00128-0 ↗
39. The ac impedance studies for porous mno2 cathode by means of modified transmission line model10.1016/S0378-7753(01)00810-2 ↗
40. Tortuosity determination of battery electrodes and separators by impedance spectroscopy10.1149/2.1141607jes ↗
41. Electrochemical impedance spectroscopy of porous electrodes: the effect of pore size distribution10.1016/S0013-4686(99)00121-8 ↗
42. Kinetics of lithium intercalation into carbon anodes: in situ impedance investigation of thickness and potential dependence10.1016/S0167-2738(98)00411-1 ↗
43. Modeling graphite anodes with serial and transmission line models10.1016/j.jpowsour.2015.02.038 ↗
44. Diffusion impedance in planar, cylindrical and spherical symmetry10.1016/0013-4686(94)E0192-3 ↗
45. 2005
46. Diskrete elektrochemische modellierung und experimentelle identifikation von lithium-ionen-zellen basierend auf halbzellpotentialen, Dissertation, Universität Bayreuth
47. Spatially resolved model for lithium-ion batteries for identifying and analyzing influences of inhomogeneous stress inside the cells
48. Coupled thermal and impedance based spatially resolved electric model for fault analysis of lithium ion battery modules
49. Complex capacitance analysis on leakage current appearing in electric double-layer capacitor carbon electrode10.1149/1.1931469 ↗
50. Deuflhard · 2002 · vol. 42
51. Degradation diagnostics for lithium ion cells10.1016/j.jpowsour.2016.12.011 ↗
52. Three-electrode setups for lithium-ion batteries: ii. experimental study of different reference electrode designs and their implications for half-cell impedance spectra10.1149/2.0241702jes ↗
53. Impedance analysis with transmission line model for reaction distribution in a pouch type lithium-ion battery by using micro reference electrode10.1149/2.0341603jes ↗
54. The distribution function of differential capacity as a new tool for analyzing the capacitive properties of lithium-ion batteries10.1016/j.elecom.2015.09.024 ↗
55. From single cell model to battery pack simulation for li-ion batteries10.1016/j.jpowsour.2008.10.051 ↗
56. Review—dynamic models of li-ion batteries for diagnosis and operation: a review and perspective10.1149/2.1061814jes ↗
57. The distribution of relaxation times as basis for generalized time-domain models for li-ion batteries10.1016/j.jpowsour.2012.07.100 ↗
58. Plett · 2015 · vol. I
59. A dynamic battery model for simulation of battery-to-grid applications
60. Influence of change in open circuit voltage on the state of charge estimation with an extended kalman filter10.1016/j.est.2017.04.011 ↗
61. Simulation and measurement of local potentials of modified commercial cylindrical cells10.1149/2.0431514jes ↗
62. Simulation and measurement of the current density distribution in lithium-ion batteries by a multi-tab cell approach10.1149/2.0551701jes ↗
63. EPA- United States Environmental Protection Agency · 2017
64. Bauer · 2017
65. L. Kokam Co., Cell Specification Data.