journal article·2020-10

Enhancement of oxygen reduction reaction kinetics using infiltrated yttria-stabilized zirconia interlayers at the electrolyte/electrode interfaces of solid oxide fuel cells

Ja Yang Koo, Taeeun Mun, Jongseo Lee, Mingi Choi, Seo Ju Kim, Wonyoung Lee

Publisher page

Abstract

Abstract We fabricate intermediate-temperature solid oxide fuel cells (SOFCs) with infiltrated film-like yttria-stabilized zirconia (YSZ) interlayers at the electrolyte/electrode interfaces, achieving improved electrochemical performances. A thin and conformal nanocrystalline YSZ interlayer is deposited at the interface between the infiltrated La0.8Sr0.2MnO3-δ nanoparticles and the YSZ scaffold using an infiltration process. The grain sizes of the infiltrated YSZ interlayers are controlled to be in the range of 8–40 nm with the sintering temperature for the infiltrated YSZ interlayer in the range of 800–1200 °C. The infiltrated YSZ interlayer provides 3.18 times reduced polarization resistance and 2.08 times increased maximum power density of 0.1 Ωcm2 and 1.54 Wcm−2 at 750 °C compared to those of an untreated cell, respectively. The substantially improved oxygen reduction reactions are attributable to the increased grain boundary densities in the infiltrated YSZ interlayer, which provide an increased number of reaction sites with a relatively low reaction barrier. Our results demonstrate that modifying the microstructures of the SOFC components at the electrolyte/electrode interfaces using conventional materials can improve electrode performances.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. Rational SOFC material design: new advances and tools10.1016/S1369-7021(11)70279-6 ↗
3. Solid oxide fuel cells for stationary, mobile, and military applications10.1016/S0167-2738(02)00349-1 ↗
4. Materials for fuel-cell technologies10.1038/35104620 ↗
5. In situ growth of Ni-encapsulated and N-doped carbon nanotubes on N-doped ordered mesoporous carbon for high-efficiency triiodide reduction in dye-sensitized solar cells10.1016/j.cej.2020.124633 ↗
6. Strategic design of vacancy-enriched Fe₁–ₓS nanoparticles anchored on Fe₃C-encapsulated and N-doped carbon nanotube hybrids for high-efficiency triiodide reduction in dye-sensitized solar cells
7. Enhanced synergetic catalytic effect of Mo2C/NCNTs@ Co heterostructures in dye-sensitized solar cells: fine-tuned energy level alignment and efficient charge transfer behavior10.1021/acsami.9b14316 ↗
8. Factors governing oxygen reduction in solid oxide fuel cell cathodes10.1021/cr020724o ↗
9. A high-performance cathode for the next generation of solid-oxide fuel cells10.1038/nature02863 ↗
10. Materials and technologies for SOFC-components10.1016/S0955-2219(01)00120-0 ↗
11. Suppression of cation segregation in (La, Sr) CoO3− δ by elastic energy minimization10.1021/acsami.7b19390 ↗
12. Cation size mismatch and charge interactions drive dopant segregation at the surfaces of manganite perovskites10.1021/ja3125349 ↗
13. Anionic defect engineering of transition metal oxides for oxygen reduction and evolution reactions10.1039/C8TA12477A ↗
14. Structural instability of cubic perovskite BaxSr1− xCo1− yFeyO3− δ10.1016/j.ssi.2007.11.031 ↗
15. Structure and electrical properties of La1− xSrxCo1− yFeyO3. Part 1. The system La0. 8Sr0. 2Co1− yFeyO310.1016/0167-2738(94)00244-M ↗
16. Enhanced oxygen reduction activity and solid oxide fuel cell performance with a nanoparticles-loaded cathode10.1021/nl5043566 ↗
17. Performance of cone-shaped tubular anode-supported segmented-in-series solid oxide fuel cell stack fabricated by dip coating technique10.1016/j.ijhydene.2009.07.004 ↗
18. Processing of hierarchical and anisotropic porosity LSM‐YSZ composites10.1111/jace.12478 ↗
19. Impedance spectroscopy analysis of La1− xSritxMnO3-yttria-stabilized zirconia electrode kinetics10.1016/0013-4686(94)00361-4 ↗
20. Geometric properties of nanostructured solid oxide fuel cell electrodes10.1149/2.057303jes ↗
21. Enhanced oxygen exchange and incorporation at surface grain boundaries on an oxide ion conductor10.1016/j.actamat.2011.09.050 ↗
22. Oxygen surface exchange at grain boundaries of oxide ion conductors10.1002/adfm.201101996 ↗
23. Modifying defect structures at interfaces for high-performance solid oxide fuel cells10.1016/j.jeurceramsoc.2020.03.009 ↗
24. Engineering of charged defects at perovskite oxide surfaces for exceptionally stable solid oxide fuel cell electrodes10.1021/acsami.9b21919 ↗
25. Improved chemical and electrochemical stability of perovskite oxides with less reducible cations at the surface10.1038/nmat4659 ↗
26. Atomic scale verification of oxide-ion vacancy distribution near a single grain boundary in YSZ10.1038/srep02680 ↗
27. MEMS-based thin-film solid-oxide fuel cells10.1557/mrs.2014.171 ↗
28. Oxygen activation over engineered surface grains on YDC/YSZ interlayered composite electrolyte for LT-SOFC10.1016/j.jpowsour.2011.08.075 ↗
29. Effects of surface chemistry and microstructure of electrolyte on oxygen reduction kinetics of solid oxide fuel cells10.1016/j.jpowsour.2015.06.149 ↗
30. Single-chamber fabrication of high-performance low-temperature solid oxide fuel cells with grain-controlled functional layers10.1039/C6TA07237B ↗
31. First-principles study of enhanced oxygen incorporation near the grain boundary on yttria-stabilized zirconia10.1166/sam.2016.2628 ↗
32. Oxygen diffusion across the grain boundary in bicrystal yttria stabilized zirconia10.1016/j.ssc.2012.09.019 ↗
33. Grain boundary blocking effect in zirconia: a Schottky barrier analysis10.1149/1.1348267 ↗
34. Enhancing SOFC cathode performance by surface modification through infiltration10.1039/c3ee42926a ↗
35. LSM-infiltrated solid oxide fuel cell cathodes10.1149/1.2206011 ↗
36. Solid oxide fuel cells with symmetrical Pt-YSZ electrodes prepared by YSZ infiltration10.1149/2.034306jes ↗
37. Investigation of La1− xSmx− ySryCoO3− δ cathode for intermediate temperature solid oxide fuel cells10.1016/j.jpowsour.2017.03.037 ↗
38. Evaluation of Ba deficient NdBaCo2O5+ δ oxide as cathode material for IT-SOFC10.1016/j.electacta.2015.09.117 ↗
39. Deconvolution of electrochemical impedance spectra for the identification of electrode reaction mechanisms in solid oxide fuel cells10.1023/A:1020599525160 ↗
40. Insight into the oxygen reduction reaction on the LSM| GDC interface of solid oxide fuel cells through impedance spectroscopy analysis10.1039/C5CY02232K ↗
41. A reliable and fast method for the solution of Fredhol integral equations of the first kind based on Tikhonov regularization10.1016/0010-4655(92)90132-I ↗
42. Fluid mechanical approaches for rational design of infiltrated electrodes of solid oxide fuel cells10.1007/s40684-019-00021-8 ↗
43. Nano-film coated cathode functional layers towards high performance solid oxide fuel cells10.1039/C8TA01660G ↗
44. Nano-tailoring of infiltrated catalysts for high-temperature solid oxide regenerative fuel cells10.1016/j.nanoen.2017.04.024 ↗
45. High performance SOFC cathode prepared by infiltration of La n+ 1Ni n O3 n+ 1 (n= 1, 2, and 3) in porous YSZ10.1149/1.3598170 ↗
46. Enhancing SOFC cathode performance by surface modification through infiltration10.1039/c3ee42926a ↗
47. Grain growth and phase stability of nanocrystalline cubic zirconia under ion irradiation10.1103/PhysRevB.82.184105 ↗
48. Structural and chemical properties of nanocrystalline La0. 5Sr0. 5CoO3− δ layers on yttria-stabilized zirconia analyzed by transmission electron microscopy10.1007/s10853-008-2502-8 ↗
49. Chemical interactions between 3 mol% yttria-zirconia and Sr-doped lanthanum manganite10.1016/S0955-2219(02)00447-8 ↗
50. LSM–YSZ interactions and anode delamination in solid oxide electrolysis cells10.1016/j.ijhydene.2012.08.104 ↗
51. Improved high temperature performance of La 0.8 Sr 0.2 MnO 3 cathode by addition of CeO 210.1016/j.jpowsour.2011.03.102 ↗
52. Modified Scherrer equation to estimate more accurately nano-crystallite size using XRD
53. Influence of thermal expansion mismatch and fatigue loading on phase changes in porcelain veneered Y‐TZP zirconia discs10.1111/j.1365-2842.2006.01675.x ↗
54. Residual stresses and tetragonal phase fraction characterisation of corrosion tested Zircaloy-4 using energy dispersive synchrotron X-ray diffraction10.1016/j.jnucmat.2012.07.025 ↗
55. Quantitative XRD analysis of zirconia-toughened alumina ceramics10.1007/BF01161460 ↗
56. Analysis on volume fraction and crystal orientation relationship of monoclinic and tetragonal oxide grown on Zr–2.5 Nb alloy10.1016/j.jnucmat.2004.06.003 ↗
57. Oxygen transfer processes in (La, Sr) MnO3/Y2O3-stabilized ZrO2 cathodes: an impedance spectroscopy study10.1016/S0167-2738(98)00142-8 ↗
58. MnO3–(Ce, Gd) O2− x composite cathodes for solid oxide fuel cells10.1016/S0167-2738(01)00871-2 ↗
59. Nanoscale bismuth oxide impregnated (La, Sr) MnO3 cathodes for intermediate-temperature solid oxide fuel cells10.1016/j.jpowsour.2008.07.003 ↗
60. Effect of firing temperature on LSM-YSZ composite cathodes: a combined three-dimensional microstructure and impedance spectroscopy study10.1149/2.053204jes ↗
61. Novel microstructural strategies to enhance the electrochemical performance of La0. 8Sr0. 2MnO3− δ cathodes10.1021/acsami.5b00255 ↗
62. Electrochemical impedance analysis of SOFC cathode reaction using evolutionary programming10.1002/fuce.201100126 ↗
63. Improving the efficiency of layered perovskite cathodes by microstructural optimization10.1039/C6TA10946B ↗
64. Cathodic polarization phenomena of perovskite oxide electrodes with stabilized zirconia10.1149/1.2100267 ↗
65. A highly efficient and robust nanofiber cathode for solid oxide fuel cells10.1002/aenm.201601890 ↗
66. Electrochemical characteristics of solid oxide fuel cell cathodes prepared by infiltrating (La, Sr) MnO3 nanoparticles into yttria-stabilized bismuth oxide backbones10.1016/j.ijhydene.2009.12.008 ↗
67. Electrochemical open circuit voltage (OCV) characterization of SOFC materials10.1007/s11581-013-0843-z ↗
68. Thin-film solid oxide fuel cell with high performance at low-temperature10.1016/S0167-2738(96)00525-5 ↗
69. Bias sputter deposition of dense yttria‐stabilized zirconia films on porous substrates10.1149/1.2048692 ↗