A control oriented reduced order electrochemical model considering variable diffusivity of lithium ions in solid
Source abstract
Abstract
Abstract Recently, reduced order electrochemical models (ROMs) have been obtained more attention by industries for real-time applications. Its computational efficiency is maximized by regarding particles in electrodes as an equivalent single particle, named ROM-Single Particle Model (SPM). However, the model has a major drawback in the inaccuracy of the predicted terminal voltage, particularly at high currents. Therefore, an advanced ROM-SPM considering variable diffusivity (VD) of lithium ions in solid is proposed that significantly improves the accuracy of the terminal voltage, named as ROM-SPMVD. The model is firstly developed, and the sensitivity analysis of the parameters is performed, which reveals that the diffusivity of lithium ions in solid of cathode (Ds,p) is strongly sensitive and identifiable. Next, the relationship between the Ds,p and state of charge (SOC) and temperature is determined by a newly developed nondestructive method. Finally, the ROM-SPMVD is validated against experimental data of a pouch type lithium ion energy cell at different current profiles and at different temperatures. Results show that consideration of variable Ds,p leads to a significant improvement in the accuracy of the ROM-SPM at high currents while maintaining the reduced computational time. The voltage error of ROM-SPMVD is reduced up to 79% compared with that of ROM-SPM.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advanced battery technologies research · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. A review of Battery Electric Vehicle technology and readiness levels10.1016/j.rser.2017.03.138 ↗
2. Review of energy storage systems for electric vehicle applications: issues and challenges10.1016/j.rser.2016.11.171 ↗
3. A review of lithium-ion battery state of charge estimation and management system in electric vehicle applications: challenges and recommendations10.1016/j.rser.2017.05.001 ↗
4. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell10.1149/1.2221597 ↗
5. The use of mathematical modeling in the design of lithium/polymer battery systems10.1016/0013-4686(95)00162-8 ↗
6. Simulation and optimization of the dual lithium ion insertion cell10.1149/1.2054684 ↗
7. Electrochemical battery model and its parameter estimator for use in a battery management system of plug-in hybrid electric vehicles10.1007/s12239-016-0051-8 ↗
8. Electrochemical model of a lithium-ion battery implemented into an automotive battery management system10.1016/j.compchemeng.2015.02.007 ↗
9. Efficient macro-micro scale coupled modeling of batteries10.1149/1.2032427 ↗
10. Reduction of an electrochemistry-based Li-ion battery model via quasi-linearization and Padé approximation10.1149/1.3519059 ↗
11. Model order reduction of 1D diffusion systems via residue grouping10.1115/1.2807068 ↗
12. Reduction of model order based on proper orthogonal decomposition for lithium-ion battery simulations10.1149/1.3049347 ↗
13. Review of simplified Pseudo-two-Dimensional models of lithium-ion batteries10.1016/j.jpowsour.2016.07.036 ↗
14. Control oriented 1D electrochemical model of lithium ion battery10.1016/j.enconman.2007.03.015 ↗
15. Reduced order model (ROM) of a pouch type lithium polymer battery based on electrochemical thermal principles for real time applications10.1016/j.electacta.2013.02.134 ↗
16. An asymptotic derivation of a single particle model with electrolyte10.1149/2.0341915jes ↗
17. Properly lumped lithium-ion battery models: a tanks-in-series approach10.1149/2.0342001JES ↗
18. A temperature dependent, single particle, lithium ion cell model including electrolyte diffusion10.1115/1.4028154 ↗
19. New fast charging method of lithium-ion batteries based on a reduced order electrochemical model considering side reaction10.1016/j.jpowsour.2019.03.007 ↗
20. Optimized temperature effect of Li-ion diffusion with layer distance in Li(NixMnyCoz)O2 cathode materials for high performance Li-ion battery10.1002/aenm.201501309 ↗
21. Chemical diffusion coefficient of lithium ion in Li3V2(PO4)3 cathode material10.1016/j.matlet.2009.08.005 ↗
22. Phenomenon of enhanced diffusion of lithium-ion in LiMn2O4 induced by electrochemical cycling10.1016/j.ssi.2006.01.007 ↗
23. Kinetics tuning of Li-ion diffusion in layered Li(NixMnyCoz)O210.1021/jacs.5b04040 ↗
24. Determination of the chemical diffusion coefficient of lithium ions in spherical Li[Ni0.5Mn0.3Co0.2]O210.1016/j.electacta.2012.01.061 ↗
25. Measurement of lithium diffusion coefficient in Li y FeSO4F10.1149/1.3581087 ↗
26. Direct determination of diffusion coefficients in commercial Li-ion batteries10.1149/2.0301805jes ↗
27. Single-particle measurements of electrochemical kinetics in NMC and NCA cathodes for Li-ion batteries10.1039/C8EE00001H ↗
28. Electrochemical deintercalation kinetics of 0.5Li2MnO3·0.5LiNi1/3Mn1/3Co1/3O2 studied by EIS and PITT10.1016/j.jallcom.2016.12.085 ↗
29. Determination of the chemical diffusion coefficient of lithium ions in spherical Li[Ni0.5Mn0.3Co0.2]O210.1016/j.electacta.2012.01.061 ↗
30. Determination of the chemical diffusion coefficient of lithium in LiFePO410.1016/S0167-2738(02)00134-0 ↗
31. “The kinetics of lithium transport through Li1−δCoO2 thin film electrode by theoretical analysis of current transient and cyclic voltammogram10.1016/S0378-7753(01)00513-4 ↗
32. Analysis of pulse and relaxation behavior in lithium-ion batteries10.1016/j.jpowsour.2010.06.107 ↗
33. Modeling lithium intercalation of a single spinel particle under potentiodynamic control10.1149/1.1393279 ↗
34. A highly efficient reduced order electrochemical model for a large format LiMn2O4/Carbon polymer battery for real time applications10.1016/j.electacta.2015.02.182 ↗
35. A transfer function type of simplified electrochemical model with modified boundary conditions and Padé approximation for Li-ion battery: Part 2. Modeling and parameter estimation10.1016/j.jpowsour.2017.03.061 ↗
36. “Charge transfer kinetics at the solid–solid interface in porous electrodes10.1038/ncomms4585 ↗
37. Lai · 2019 · 890
38. Nesterov · 2013
39. Design of a calorimeter for measurement of heat generation rate of lithium ion battery using thermoelectric device10.4271/2017-01-1213 ↗
40. An approximate solution for electrolyte concentration distribution in physics-based lithium-ion cell models10.1016/j.microrel.2012.11.002 ↗
41. Comparison of the structural and electrochemical properties of layered Li [NixCoyMnz]O2 (x= 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries10.1016/j.jpowsour.2013.01.063 ↗
42. Origin of structural evolution in capacity degradation for overcharged NMC622 via operando coupled investigation10.1021/acsami.7b06326 ↗
43. Characterization of electronic and ionic transport in Li1-xNi0.33Mn0.33Co0.33O2(NMC333) and Li1-xNi0.50Mn0.20Co0.30O2(NMC523) as a function of Li content10.1149/2.0131608jes ↗
44. Investigation on the thermal behavior of Ni-rich NMC lithium ion battery for energy storage10.1016/j.applthermaleng.2019.114749 ↗