Transition metal dichalcogenides in alliance with Ag ameliorate the interfacial connection between Li anode and garnet solid electrolyte
Source abstract
Abstract
Abstract Solid-state batteries (SSBs) exhibit a promising prospect due to their potential in terms of safety and energy densities. As an oxide electrolyte, cubic garnet solid electrolyte (cubic-Li7La3Zr2O12) attracts wide attention due to the high ionic conductivity. However, the problem of poor contact between garnet solid electrolyte and lithium impairs the development of solid electrolytes. Herein, we demonstrate an effective modification method to cope with the interface issue between electrolyte and Li metal by introducing an Ag@WSe2 composite layer. By applying this method, the interfacial resistance between the garnet electrolyte and Li metal is reduced to ~12.5 Ω cm2, which is nearly 150 times lower than the value of 1900 Ω cm2 before modification. The WSe2 acts as a framework to immobilize Ag, while Ag forms an Ag–Li alloy with lithium for lithium ions transportation. And other Ag@TMDs (transition metal dichalcogenides) composites have also been proven to have similar effects. In addition, the Li | Ag@WSe2-LLZO | LFP full cell demonstrates a satisfactory capacity and excellent cycle stability (500 cycles with 90% capacity retention rate) at room temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Review on solid electrolytes for all-solid-state lithium-ion batteries10.1016/j.jpowsour.2018.04.022 ↗
2. A complex hydride lithium superionic conductor for high-energy-density all-solid-state lithium metal batteries10.1038/s41467-019-09061-9 ↗
3. Lithium battery chemistries enabled by solid-state electrolytes10.1038/natrevmats.2016.103 ↗
4. Electrospun ceramic nanofibers as 1D solid electrolytes for lithium batteries10.1016/j.elecom.2019.106483 ↗
5. Single‐ion conducting poly (ethylene oxide carbonate) as solid polymer electrolyte for lithium batteries10.1002/batt.201900119 ↗
6. Toward high lithium conduction in solid polymer and polymer–ceramic batteries10.1016/j.coelec.2018.03.033 ↗
7. Status and challenges in enabling the lithium metal electrode for high-energy and low-cost rechargeable batteries10.1038/s41560-017-0047-2 ↗
8. Lithium anode stable in air for low-cost fabrication of a dendrite-free lithium battery10.1038/s41467-019-08767-0 ↗
9. A lithium superionic conductor10.1038/nmat3066 ↗
10. Solid halide electrolytes with high lithium-ion conductivity for application in 4 V class bulk-type All-solid-state batteries10.1002/adma.201803075 ↗
11. Superionic conduction and interfacial properties of the low temperature phase Li7P2S8Br0.5I0.510.1016/j.ensm.2019.02.029 ↗
12. Garnet electrolyte with an ultralow interfacial resistance for Li-metal batteries10.1021/jacs.8b03106 ↗
13. Germanium thin film protected lithium aluminum germanium phosphate for solid-state Li batteries10.1002/aenm.201702374 ↗
14. Solid garnet batteries10.1016/j.joule.2019.03.019 ↗
15. Transition from superlithiophobicity to superlithiophilicity of garnet solid-state electrolyte10.1021/jacs.6b06777 ↗
16. Discovering the influence of lithium loss on garnet Li7La3Zr2O12 electrolyte phase stability10.1021/acsaem.9b02401 ↗
17. Design of a mixed conductive garnet/Li interface for dendrite-free solid lithium metal batteries10.1039/C9EE01903K ↗
18. Facile protection of lithium metal for all‐solid‐state batteries10.1002/open.201900021 ↗
19. Surface chemistry mechanism of ultra-low interfacial resistance in the solid-state electrolyte Li7La3Zr2O1210.1021/acs.chemmater.7b03002 ↗
20. Garnet electrolyte with a small interfacial resistance for Li–ion batteries
21. Lithium-metal growth kinetics on LLZO garnet-type solid electrolytes10.1016/j.joule.2019.06.013 ↗
22. Understanding interface stability in solid-state batteries
23. Toward a fundamental understanding of the lithium metal anode in solid-state batteries-an electrochemo-mechanical study on the garnet-type solid electrolyte Li6.25Al0.25La3Zr2O1210.1021/acsami.9b02537 ↗
24. Overcoming the interfacial limitations imposed by the solid–solid interface in solid‐state batteries using ionic liquid‐based interlayers10.1002/smll.202000279 ↗
25. Negating interfacial impedance in garnet-based solid-state Li metal batteries10.1038/nmat4821 ↗
26. Nanoscale ZnO surface modification of garnet-based solid-state electrolyte for lithium metal anodes10.1021/acs.nanolett.6b04695 ↗
27. Li7La3Zr2O12 interface modification for Li dendrite prevention10.1021/acsami.6b00831 ↗
28. Toward garnet electrolyte–based Li metal batteries: an ultrathin, highly effective, artificial solid-state electrolyte/metallic Li interface10.1126/sciadv.1601659 ↗
29. Guiding uniform Li plating/stripping through lithium–aluminum alloying medium for long‐life Li metal batteries10.1002/ange.201811955 ↗
30. Reducing interfacial resistance between garnet-structured solid-state electrolyte and Li-metal anode by a germanium layer10.1002/adma.201606042 ↗
31. Diffusion limitation of lithium metal and Li–Mg alloy anodes on LLZO type solid electrolytes as a function of temperature and pressure10.1002/aenm.201902568 ↗
32. Formation of self-limited, stable and conductive interfaces between garnet electrolytes and lithium anodes for reversible lithium cycling in solid-state batteries10.1039/C8TA02276C ↗
33. Transient behavior of the metal interface in lithium metal-garnet batteries10.1002/anie.201708637 ↗
34. Building an interfacial framework: Li/garnet interface stabilization through a Cu6Sn5 layer10.1021/acsenergylett.9b01158 ↗
35. Electronics and optoelectronics of two-dimensional transition metal dichalcogenides10.1038/nnano.2012.193 ↗
36. Recent development of two-dimensional transition metal dichalcogenides and their applications10.1016/j.mattod.2016.10.002 ↗
37. Potential application of metal dichalcogenides double-layered heterostructures as anode materials for Li-ion batteries10.1021/acs.jpcc.5b11677 ↗
38. Theoretical investigation of strain-engineered WSe2 monolayers as anode material for Li-ion batteries10.1016/j.jallcom.2019.07.040 ↗
39. The role of metal disulfide interlayer in Li–S batteries10.1021/acs.jpcc.7b08719 ↗
40. Synthesis of surface-functionalized WS2 nanosheets and performance as Li-ion battery anodes10.1021/jz300480w ↗
41. 2D space-confined synthesis of few-layer MoS2 anchored on carbon nanosheet for lithium-ion battery anode10.1021/nn506850e ↗
42. MoS2Nanoflowers with expanded interlayers as high-performance anodes for sodium-ion batteries10.1002/ange.201407898 ↗
43. Exfoliated MoS2 nanocomposite as an anode material for lithium ion batteries10.1021/cm101254j ↗
44. Van der Waals metallic transition metal dichalcogenides10.1021/acs.chemrev.7b00618 ↗
45. Structural, mechanical and tribological properties of Mo–S–C solid lubricant coating10.1016/j.surfcoat.2010.11.043 ↗
46. Review on self-lubricant transition metal dichalcogenide nanocomposite coatings alloyed with carbon10.1016/j.surfcoat.2011.03.004 ↗
47. A platinum nanolayer on lithium metal as an interfacial barrier to shuttle effect in Li-S batteries10.1016/j.jpowsour.2019.04.078 ↗
48. Dendrite‐Free lithium plating induced by in situ transferring protection layer from separator
49. Effect of conductor materials in lithium composite anode on plating and stripping of lithium
50. None-mother-powder method to prepare dense Li-garnet solid electrolytes with high critical current density
51. Dopant‐dependent stability of garnet solid electrolyte interfaces with lithium metal10.1002/aenm.201803440 ↗
52. Fermi surfaces and band structures of the 2H metallic transition-metal dichalcogenides10.1088/0022-3719/9/7/010 ↗
53. Room-temperature electrical control of exciton flux in a van der Waals heterostructure10.1038/s41586-018-0357-y ↗
54. In situ formation of a bifunctional interlayer enabled by a conversion reaction to initiatively prevent lithium dendrites in a garnet solid electrolyte10.1039/C8EE03390K ↗
55. Manipulating Li2O atmosphere for sintering dense Li7La3Zr2O12 solid electrolyte10.1016/j.ensm.2019.01.018 ↗
56. Lithiophilic Ag/Li composite anode via a spontaneous reaction for Li nucleation with reduced barrier10.1039/C9TA05335B ↗
57. Silver: high performance anode for thin film lithium ion batteries10.1016/j.jpowsour.2003.07.004 ↗
58. Various structures of 2D transition‐metal dichalcogenides and their applications10.1002/smtd.201800094 ↗