journal article·2020-03

An ultrasonic atomization spray strategy for constructing hydrophobic and hydrophilic synergistic surfaces as gas diffusion layers for proton exchange membrane fuel cells

Feng Guo, Xiaoling Yang, Haibo Jiang, Yihua Zhu, Chunzhong Li

Publisher page

Abstract

Abstract An effective strategy to construct a gas diffusion layer with hydrophobic and hydrophilic synergistic surfaces using a one-step ultrasonic atomizing spray low surface hydrophilic reagent (aerosol ® ot-75 surfactant: polyacrylic acid: deionized water = 1:1:8) is reported. Higher peak power density is obtained with respect to conventionally prepared gas diffusion layers. The Energy Dispersive Spectrometer (EDS) mapping of the cross section and surface of the gas diffusion layer proves that the hydrophobic and hydrophilic synergistic surfaces is existed in the whole gas diffusion layer. By comparing the contact angle, water breakthrough pressure and pore size distribution of the two kind of gas diffusion layers, the main advantage of this gas diffusion layer with hydrophobic - hydrophilic synergistic surfaces is provide water transfer pathway so that improve the cell performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. A review of automotive proton exchange membrane fuel cell degradation under start-stop operating condition10.1016/j.apenergy.2018.04.049 ↗
2. A review of durability test protocols of the proton exchange membrane fuel cells for vehicle10.1016/j.apenergy.2018.04.050 ↗
3. Improved fuel-cell catalysts require much less platinum for the same performance10.1126/science.aal3303 ↗
4. Electrode for proton exchange membrane fuel cells: a review10.1016/j.rser.2018.03.007 ↗
5. Novel approach to determine cathode two-phase-flow pressure drop of proton exchange membrane fuel cell and its application on water management10.1016/j.apenergy.2017.01.010 ↗
6. Preparation and operation of gas diffusion electrodes for high-temperature proton exchange membrane fuel cells10.1016/j.jpowsour.2007.07.019 ↗
7. Single-step fabrication of ABPBI-based GDE and study of its MEA characteristics for high-temperature PEM fuel cells10.1016/j.ijhydene.2010.05.040 ↗
8. Study of the influence of the amount of PBI–H3PO4 in the catalytic layer of a high temperature PEMFC10.1016/j.ijhydene.2009.11.091 ↗
9. Optimization of gas diffusion electrode for polybenzimidazole-based high temperature proton exchange membrane fuel cell: evaluation of polymer binders in catalyst layer10.1016/j.ijhydene.2013.06.107 ↗
10. Effects of microporous layers in polymer electrolyte fuel cells10.1149/1.1861194 ↗
11. Study on the characteristics of GDL with different PTFE content and its effect on the performance of PEMFC10.1016/j.ijheatmasstransfer.2018.09.097 ↗
12. Liquid water transport in gas diffusion layer of polymer electrolyte fuel cells10.1149/1.1646148 ↗
13. A bi-functional micro-porous layer with composite carbon black for PEM fuel cells10.1016/j.jpowsour.2006.06.064 ↗
14. Understanding the gas diffusion layer in proton exchange membrane fuel cells. I. How its structural characteristics affect diffusion and performance10.1016/j.jpowsour.2013.09.090 ↗
15. Influence of hydrophilicity in micro-porous layer for polymer electrolyte membrane fuel cells, Electrochim
16. Enhanced water management of polymer electrolyte fuel cells with additive-containing microporous layers10.1021/acsaem.8b01059 ↗
17. Analysis of the role of the microporous layer in improving polymer electrolyte fuel cell performance10.1016/j.electacta.2018.02.100 ↗
18. Hydrophilic and hydrophobic double microporous layer coated gas diffusion layer for enhancing performance of polymer electrolyte fuel cells under no-humidification at the cathode10.1016/j.jpowsour.2011.10.002 ↗
19. Triple microporous layer coated gas diffusion layer for performance enhancement of polymer electrolyte fuel cells under both low and high humidity conditions10.1016/j.jpowsour.2013.10.066 ↗
20. Laser-perforated gas diffusion layer for promoting liquid water transport in a proton exchange membrane fuel cell10.1016/j.ijhydene.2017.08.131 ↗
21. Through-plane wettability tuning of fibrous carbon layers via O2 plasma treatment for enhanced water management10.1016/j.apsusc.2018.07.005 ↗
22. Engineered water highways in fuel cells: radiation grafting of gas diffusion layers10.1002/adma.201503557 ↗
23. Modeling two-phase behavior in PEFCs10.1149/1.1792891 ↗
24. A review of durability test protocols of the proton exchange membrane fuel10.1016/j.apenergy.2018.04.050 ↗
25. A comparison of fuel cell testing protocols e A case study: protocols used by the U.S. Department of energy, European union, international electrotechnical commission/fuel cell testing and standardization network, and fuel cell technical team10.1016/j.jpowsour.2013.06.026 ↗
26. Transient limiting current measurements for characterization of gas diffusion layers10.1016/j.jpowsour.2018.09.003 ↗