Prediction of the heavy charging current effect on nickel-rich/silicon-graphite power batteries based on adiabatic rate calorimetry measurement
Source abstract
Abstract
Abstract The LiNi0.8Mn0.1Co0.1O2/Silicon-carbon (NCM811/Si@C) lithium ion battery is used in the plug-in electric vehicle due to its high specific energy. The mileage of electric vehicles can be improved by increasing the energy density of batteries, but the charging process becomes a more challenge issue since the excessive charging current results in high temperature while the thermal stability of NCM811 material is poor. Also, the increasing of temperature may cause the thermal runaway of lithium ion battery. In this work, in order to study the thermal runaway prevention during charging process, the NCM811/Si@C battery model is set up, and the simulation results are verified by the experimental results. The detailed temperature distribution of the battery is observed, which can advise on the thermal management system of the batteries. Based on the thermal runaway data, the maximum safe charge current under different ambient temperature is predicted, and the relationship between maximum safe charging current and ambient temperature is found.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Towards greener and more sustainable batteries for electrical energy storage10.1038/nchem.2085 ↗
2. Environmentally-friendly aqueous Li (or Na)-ion battery with fast electrode kinetics and super-long life10.1126/sciadv.1501038 ↗
3. Evaluation of lithium-ion batteries through the simultaneous consideration of environmental, economic and electrochemical performance indicators10.1016/j.jclepro.2017.09.189 ↗
4. Energy and environmental assessment of a traction lithium-ion battery pack for plug-in hybrid electric vehicles10.1016/j.jclepro.2019.01.056 ↗
5. Li-ion battery materials: present and future10.1016/j.mattod.2014.10.040 ↗
6. Thermal management performances of PCM/water cooling-plate using for lithium-ion battery module based on non-uniform internal heat source10.1016/j.applthermaleng.2017.07.141 ↗
7. The effect of electrode design parameters on battery performance and optimization of electrode thickness based on the electrochemical–thermal coupling model10.1039/C8SE00503F ↗
8. Time sequence map for interpreting the thermal runaway mechanism of lithium-ion batteries with LiNixCoyMnzO2 cathode10.3389/fenrg.2018.00126 ↗
9. Experimental investigation and visualization on thermal runaway of hard prismatic lithium-ion batteries used in smart phones10.1007/s10973-018-7077-2 ↗
10. A dynamic capacity degradation model and its applications considering varying load for a large format Li-ion battery10.1016/j.apenergy.2015.12.063 ↗
11. Batteries and fuel cells for emerging electric vehicle markets10.1038/s41560-018-0108-1 ↗
12. Singer · 2016
13. High-capacity lithium ion batteries: bridging future and current10.1016/j.ensm.2016.05.010 ↗
14. Cost of automotive lithium-ion batteries operating at high upper cutoff voltages10.1016/j.jpowsour.2018.09.037 ↗
15. Time sequence map for interpreting the thermal runaway mechanism of lithium-ion batteries with LiNixCoyMnzO2 cathode10.3389/fenrg.2018.00126 ↗
16. Silicon based lithium-ion battery anodes: a chronicle perspective review10.1016/j.nanoen.2016.11.013 ↗
17. Silicon oxides: a promising family of anode materials for lithium-ion batteries10.1039/C8CS00441B ↗
18. Designing nanostructured Si anodes for high energy lithium ion batteries10.1016/j.nantod.2012.08.004 ↗
19. Silicon/graphene based nanocomposite anode: large-scale production and stable high capacity for lithium ion batteries10.1039/C4TA01013B ↗
20. The impact of calendar aging on the thermal stability of a LiMn2O4–Li(Ni1/3Mn1/3Co1/3)O2/graphite lithium-ion cell10.1016/j.jpowsour.2014.06.040 ↗
21. Surface chemistry and morphology of the solid electrolyte interphase on silicon nanowire lithium-ion battery anodes10.1016/j.jpowsour.2009.01.007 ↗
22. Atomic-level understanding toward a high-capacity and high-power silicon oxide (SiO) material10.1021/acs.jpcc.5b10589 ↗
23. Recent advancement of SiOx based anodes for lithium-ion batteries10.1016/j.jpowsour.2017.07.073 ↗
24. Application of Stabilized Lithium Metal Powder (SLMP®) in graphite anode – a high efficient prelithiation method for lithium-ion batteries10.1016/j.jpowsour.2014.02.112 ↗
25. Nanostructured silicon for high capacity lithium battery anodes10.1039/C0EE00281J ↗
26. Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x = 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries10.1016/j.jpowsour.2013.01.063 ↗
27. Thermal behavior and failure mechanism of lithium ion cells during overcharge under adiabatic conditions10.1016/j.apenergy.2016.08.124 ↗
28. Abuse behavior of high-power, lithium-ion cells10.1016/S0378-7753(02)00488-3 ↗
29. Thermal runaway mechanism of lithium ion battery for electric vehicles: a review10.1016/j.ensm.2017.05.013 ↗
30. Thermal runaway caused fire and explosion of lithium ion battery10.1016/j.jpowsour.2012.02.038 ↗
31. Mechanism of thermal runaway in lithium-ion cells10.1149/2.0611807jes ↗
32. Numerical study on the thermal performance of a composite board in battery thermal management system10.1016/j.applthermaleng.2016.05.187 ↗
33. Comparison of modeling predictions with experimental data from plastic lithium ion cells10.1149/1.1836921 ↗
34. Mathematical modeling of a lithium ion battery with thermal effects in COMSOL Inc. Multiphysics (MP) software10.1016/j.jpowsour.2011.03.017 ↗
35. Electro-thermal modeling and experimental validation for lithium ion battery10.1016/j.jpowsour.2011.10.027 ↗
36. Modeling and simulation of inhomogeneities in a 18650 nickel-rich, silicon-graphite lithium-ion cell during fast charging10.1016/j.jpowsour.2018.11.043 ↗
37. 3D simulation on the internal distributed properties of lithium-ion battery with planar tabbed configuration10.1016/j.jpowsour.2015.06.034 ↗
38. Mathematical modeling of a lithium ion battery with thermal effects in COMSOL Inc. Multiphysics (MP) software10.1016/j.jpowsour.2011.03.017 ↗
39. Electro-thermal modeling and experimental validation for lithium ion battery10.1016/j.jpowsour.2011.10.027 ↗
40. Thermal runaway features of large format prismatic lithium ion battery using extended volume accelerating rate calorimetry10.1016/j.jpowsour.2014.01.005 ↗
41. The state of understanding of the lithium-ion-battery graphite solid electrolyte interphase (SEI) and its relationship to formation cycling10.1016/j.carbon.2016.04.008 ↗