Practical high temperature (80 °C) storage study of industrially manufactured Li-ion batteries with varying electrolytes
Source abstract
Abstract
Abstract A previous study is focused on high temperature cycling of industrially manufactured Li-ion pouch cells (NMC-111/Graphite) with different electrolytes at 80 °C [JPS 373 (2018) 172–183]. Within this article the same test set-up is used, with cells stored for 30 days at different open circuit potentials and various electrolytes instead of electrochemical cycling. The most pronounced cell degradation (capacity fade and resistance increase) happens at high potentials. However appropriate electrolyte formulations are able to suppress ageing conditions by forming passivating surface films on both electrodes. Compared with electrochemical cycling at 80 °C, cells with enhanced electrolytes only show a slight resistance increase during storage and the capacity fade is much lower. Additionally it is shown for the first time, that the resistance is decreasing and capacity is regained once these cells are cycled again at room temperature. This is not the case for electrolytes without additives or just vinylene carbonate (VC) as an additive. It is further shown that the resistance increase of cells with the other electrolytes is accompanied by a reduction of the cell volume during further cycling. This behaviour is likely related to the reduction of CO2 at the anode to form additional SEI layer components.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. High temperature electrical energy storage : advances, challenges, and frontiers10.1039/C6CS00012F ↗
2. Mechanism of gas build-up in a Li-ion cell at elevated temperature10.1016/j.jpowsour.2004.01.042 ↗
3. Electrochemical behaviors of LiCo1/3Ni1/3Mn1/3O2 in lithium batteries at elevated temperatures10.1016/j.jpowsour.2005.03.080 ↗
4. Study on the thermal accumulation and distribution inside a parked car cabin
5. Lithium-ion batteries working at 85 C: aging phenomena and electrode/electrolyte interfaces studied by XPS10.1149/2.061210jes ↗
6. Lithium ion batteries (NMC/Graphite) cycling at 80°C: different electrolytes and related degradation mechanism10.1016/j.jpowsour.2017.11.014 ↗
7. Capacity-fading mechanisms of LiNiO2-based lithium-ion batteries10.1149/1.3076137 ↗
8. Effect of Mg-doping on the degradation of LiNiO 2-based cathode materials by combined spectroscopic methods10.1016/j.jpowsour.2012.01.071 ↗
9. Capacity fade mechanisms and side reactions in lithium-ion batteries10.1149/1.1838857 ↗
10. Ageing mechanisms in lithium-ion batteries10.1016/j.jpowsour.2005.01.006 ↗
11. Calendar aging of lithium-ion batteries10.1149/2.0411609jes ↗
12. Thermal behaviour of the lithiated-graphite/electrolyte interface through GC/MS analysis10.1016/j.electacta.2012.08.016 ↗
13. Accelerating rate calorimetry study on the thermal stability of lithium intercalated graphite in electrolyte. II. Modeling the results and predicting differential scanning calorimeter curves10.1149/1.1391894 ↗
14. Chemical composition and morphology of the elevated temperature SEI on graphite10.1149/1.1397771 ↗
15. New electrolyte compositions stable over the O-V to 5-V voltage range and compatible with the Li1+Xmn2O4 carbon Li-Ion cells10.1016/0167-2738(94)90418-9 ↗
16. CO2 gas evolution on cathode materials for lithium-ion batteries10.1149/1.2712138 ↗
17. Identification of the source of evolved gas in Li-Ion batteries using 13C-labeled solvents10.1149/1.2969947 ↗
18. Trimethylsilylcyclopentadiene as a novel electrolyte additive for high temperature application of lithium nickel manganese oxide cathode10.1016/j.jpowsour.2017.08.021 ↗
19. Improving the long-term cycling performance of lithium-ion batteries at elevated temperature with electrolyte additives10.1016/j.jpowsour.2015.04.070 ↗
20. Effects of fluoroethylene carbonate (FEC) on anode and cathode interfaces at elevated temperatures10.1149/2.0071509jes ↗
21. Effect of additives on electrochemical performance of lithium nickel cobalt manganese oxide at high temperature10.1016/j.jpowsour.2013.12.024 ↗
22. Methylene ethylene carbonate: novel additive to improve the high temperature performance of lithium ion batteries10.1016/j.jpowsour.2012.02.004 ↗
23. Interactions between positive and negative electrodes in Li-Ion cells operated at high temperature and high voltage10.1149/2.0951603jes ↗
24. The use of elevated temperature storage experiments to learn about parasitic reactions in wound LiCoO2/Graphite cells10.1149/2.007111jes ↗
25. Predicting and extending the lifetime of Li-Ion batteries10.1149/2.060309jes ↗
26. Studies of gas generation, gas consumption and impedance growth in Li-Ion cells with carbonate or fluorinated electrolytes using the pouch bag method10.1149/2.1091702jes ↗
27. An apparatus for the study of in situ gas evolution in Li-Ion pouch cells10.1149/2.0151410jes ↗
28. Study of electrolyte additives using electrochemical impedance spectroscopy on symmetric cells10.1149/2.005302jes ↗
29. Self-discharge of secondary lithium-ion graphite anodes10.1016/S0378-7753(02)00359-2 ↗
30. Theoretical investigations on oxidative stability of solvents and oxidative decomposition mechanism of ethylene carbonate for lithium ion battery use10.1021/jp9074064 ↗
31. Oxidation induced decomposition of ethylene carbonate from DFT calculations – importance of explicitly treating surrounding solvent10.1039/c2cp41103b ↗
32. Enabling linear alkyl carbonate electrolytes for high voltage Li-ion cells10.1016/j.jpowsour.2016.08.015 ↗
33. Origin of graphite exfoliation an investigation of the important role of solvent cointercalation10.1149/1.1394076 ↗
34. Mechanism of self-discharge in graphite – lithium anode10.1016/S0013-4686(01)00827-1 ↗
35. Effects of vinylene carbonate on high temperature storage of high voltage Li-ion batteries10.1016/j.jpowsour.2011.06.095 ↗
36. Impedance spectra of nonhomogeneous, multilayered porous composite graphite electrodes for Li-ion batteries: experimental and theoretical studies10.1021/jp107406s ↗
37. Influence of over-discharge on the lifetime and performance of LiFePO4/graphite batteries10.1039/C6RA01677D ↗
38. The role of Li-ion battery electrolyte reactivity in performance decline and self-discharge10.1016/S0378-7753(03)00149-6 ↗
39. The role of prop-1-ene-1,3-sultone as an additive in lithium-ion cells10.1016/j.jpowsour.2015.08.060 ↗
40. Properties of solid electrolyte interphase formed by prop-1-ene-1,3-sultone on graphite anode of Li-ion batteries10.1016/j.electacta.2013.04.142 ↗
41. A comparative study of a family of sulfate electrolyte additives10.1149/2.015403jes ↗
42. Effects of electrolyte additives and solvents on unwanted lithium plating in lithium-ion cells10.1149/2.1081706jes ↗
43. A comparative study of overdischarge behaviors of cathode materials for lithium-ion batteries10.1007/s10008-011-1484-7 ↗
44. Ellis · 2016
45. Multi-scale investigation of thickness changes in a commercial pouch type lithium-ion battery
46. Homogeneous electron transfer catalysis of the electrochemical reduction of carbon dioxide. Do aromatic anion radicals react in an outer-sphere manner?10.1021/ja960605o ↗
47. The effects of a ternary electrolyte additive system on the electrode/electrolyte interfaces in high voltage Li-Ion cells10.1149/2.1051606jes ↗
48. Improving cyclic stability of lithium nickel manganese oxide cathode for high voltage lithium ion battery by modifying electrode/electrolyte interface with electrolyte additive10.1016/j.electacta.2014.09.151 ↗
49. Effect of propane sultone on elevated temperature performance of anode and cathode materials in lithium-ion batteries10.1016/j.jpowsour.2009.03.067 ↗