In situ stress measurements during electrochemical cycling of lithium-rich cathodes
Source abstract
Abstract
Lithium-rich layered oxides (Li1+xM1-xO2, M= Ni, Mn, Co) are attractive cathode materials for lithium ion batteries due to their high reversible capacity originating from their high lithium and manganese content. During cycling, structural changes cause compositional stresses that may lead to mechanical degradation. In this study, we seek to characterize this degradation using Li1.2Mn0.55Ni0.125Co0.125O2(LR-NMC) thin-films prepared by sputtering on sapphire substrates and characterized using x-ray diffraction (XRD), raman spectroscopy, and scanning electron microscopy (SEM). A multibeam optical stress sensor (MOSS) is used to quantitatively measure the average stress in the cathode film during electrochemical cycling. A unique and unpredicted stress signature is observed during the first charge. Initially, a tensile stress is observed, consistent with volume contraction from lithium removal, however, the stress reverses and becomes compressive with continued charging beyond ~4V vs Li/Li+, indicating volume expansion; this phenomenon is present in the first cycle only. The origin of this irreversible stress during the first charge is not clear; cracking, oxygen loss, and the formation of a surface phase are explored as possible causes. Subsequent cycling is reversible, with volume expansion during lithiation and volume contraction during delithiation. Raman spectroscopy provides evidence of the layered-to-spinel phase transition after cycling. After reannealing in an oxygen environment, the original raman spectra is recovered. Annealed samples show the same first cycle behavior after re-cycling. Atomistic modelling in conjunction with experimental results aids in understanding the effects of stress on kinetics and phase transformations, guiding the development of improved lithium rich cathodes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Chung · 2015
2. Li2MnO3-stabilized LiMO2 (M = Mn, Ni, Co) electrodes for lithium-ion batteries10.1039/b702425h ↗
3. Synthesis, Structure, and Electrochemical Behavior of Li[Ni[sub x]Li[sub 1/3−2x/3]Mn[sub 2/3−x/3]]O[sub 2]10.1149/1.1471541 ↗
4. Unexpected voltage fade in LMR-NMC oxides cycled below the “activation” plateau10.1149/2.0741501jes ↗
5. Probing the initiation of voltage decay in Li-Rich layered cathode materials at atomic scale10.1039/C4TA06856D ↗
6. Li2MnO3-based composite cathodes for lithium batteries: a novel synthesis approach and new structures10.1016/j.elecom.2011.06.037 ↗
7. Understanding long-term cycling performance of Li1.2Ni0.15Mn0.55Co0.1O2-Graphite lithium-ion cells10.1149/2.002305jes ↗
8. Structural transformation of a lithium-rich Li1.2Co0.1Mn0.55Ni0.15O2 cathode during high voltage cycling resolved by in situ X-ray diffraction10.1016/j.jpowsour.2012.11.144 ↗
9. Correlating hysteresis and voltage fade in lithium- and manganese-rich layered transition-metal oxide electrodes10.1016/j.elecom.2013.04.022 ↗
10. Demonstrating oxygen loss and associated structural reorganization in the lithium battery cathode Li[Ni0.2Li0.2Mn 0.6]O210.1021/ja062027+ ↗
11. Oxygen release from high-energy xLi2MnO3·(1-X)LiMO2 (M = Mn, Ni, Co): electrochemical, differential electrochemical mass spectrometric, in situ pressure, and in situ temperature characterization10.1016/j.electacta.2013.01.105 ↗
12. Different oxygen redox participation for bulk and surface: a possible global explanation for the cycling mechanism of Li1.20Mn0.54Co0.13Ni0.13O210.1016/j.jpowsour.2013.02.075 ↗
13. Insight into the atomic structure of cycled lithium-rich layered oxide Li1.20Mn0.54Co0.13Ni0.13O2 using HAADF STEM and electron nanodiffraction10.1021/jp509388j ↗
14. Correlation between oxygen vacancy, microstrain, and cation distribution in lithium-excess layered oxides during the first electrochemical cycle10.1021/cm4000119 ↗
15. The structural and chemical origin of the oxygen redox activity in layered and cation-disordered Li-excess cathode materials10.1038/nchem.2524 ↗
16. First evidence of manganese − nickel segregation and densifi cation upon cycling in Li-Rich layered oxides for lithium batteries10.1021/nl4019275 ↗
17. Uncovering the roles of oxygen vacancies in cation migration in lithium excess layered oxides10.1039/C4CP01799D ↗
18. First evidence of manganese-nickel segregation and densification upon cycling in Li-rich layered oxides for lithium batteries10.1021/nl4019275 ↗
19. Monitoring stress in thin films during processing10.1179/026708403225010118 ↗
20. Thickness effects on the lithiation of amorphous silicon thin films10.1016/j.scriptamat.2010.10.003 ↗
21. In situ measurements of stress-potential coupling in lithiated silicon10.1149/1.3489378 ↗
22. The tension of metallic films deposited by electrolysis
23. Internal stress due to solvent co-intercalation in graphite electrodes for Li ion batteries10.1016/j.eml.2016.05.001 ↗
24. Stress mitigation during the lithiation of patterned amorphous Si islands10.1149/2.048201jes ↗
25. Deformation and stress in electrode materials for Li-ion batteries10.1016/j.pmatsci.2014.02.001 ↗
26. Compositional stresses in polycrystalline titania films10.1111/j.1551-2916.2008.02710.x ↗
27. Thermal expansion in lithium manganese oxide spinels Li[LixMn2−x]O4 with 0 ≤ x ≤ 1/310.1016/j.jpowsour.2012.09.107 ↗
28. In situ x-ray diffraction study of layered Li–Ni–Mn–Co oxides: effect of particle size and structural stability of core–shell materials10.1021/acs.chemmater.5b03500 ↗
29. In situ X-ray diffraction study of the lithium excess layered oxide compound Li[Li0.2Ni0.2Mn0.6]O2 during electrochemical cycling10.1016/j.ssi.2011.11.018 ↗
30. In situ stress evolution in Li1+ xMn2O4 thin films during electrochemical cycling in li-ion cells10.1149/2.0161613jes ↗
31. Synthesis and electrochemical properties of Li[Li0.07Ni0.1Co0.6Mn0.23]O2 as a possible cathode material for lithium-ion batteries10.1016/j.electacta.2006.06.024 ↗
32. Performance enhancement of 4.8 V Li1.2Mn0.525Ni0.175Co0.1O2 battery cathode using fluorinated linear carbonate as a high-voltage additive10.1149/2.1141412jes ↗
33. Review—lithium-excess layered cathodes for lithium rechargeable batteries10.1149/2.0071514jes ↗
34. Structural evolution of layered Li1.2Ni0.2Mn0.6O2 upon electrochemical cycling in a Li rechargeable battery10.1039/c0jm01971b ↗
35. Synthesis–structure–property relations in layered, “Li-excess” oxides electrode materials Li[Li[sub 1/3−2x/3]Ni[sub x]Mn[sub 2/3−x/3]]O[sub 2] (x=1/3, 1/4, and 1/5)10.1149/1.3473830 ↗
36. Mechanisms associated with the “plateau” observed at high voltage for the overlithiated Li1.12(Ni0.425Mn0.425Co0.15)0.88O2 system10.1021/cm070435m ↗
37. Identifying surface structural changes in layered Li-excess nickel manganese oxides in high voltage lithium ion batteries: a joint experimental and theoretical study10.1039/c1ee01131f ↗
38. Reversible oxygen participation to the redox processes revealed for Li1.20Mn0.54Co0.13Ni0.13O210.1149/2.038306jes ↗
39. Structural and chemical evolution of Li- and Mn-Rich layered cathode material10.1021/cm5045978 ↗
40. Direct evidence of oxygen evolution from Li1+x (Ni 1/3Mn1/3Co1/3)1-x O2 at high potentials10.1007/s10800-008-9491-9 ↗
41. Gas–solid interfacial modification of oxygen activity in layered oxide cathodes for lithium-ion batteries10.1038/ncomms12108 ↗
42. Electrolytes and interphases in Li-ion batteries and beyond10.1021/cr500003w ↗
43. The cathode-electrolyte interface in the Li-ion battery10.1016/j.electacta.2004.03.049 ↗
44. Degradation mechanisms of lithium-rich nickel manganese cobalt oxide cathode thin films10.1039/c4ra03674c ↗
45. Structural analysis of Li2MnO3 and related Li-Mn-O materials10.1149/1.3609849 ↗
46. Computational analysis of coupled anisotropic chemical expansion in Li2-XMnO3-δ
47. Effect of electrochemical charging on elastoplastic properties and fracture toughness of LiXCoO210.1149/2.0141411jes ↗
48. The impact of oxygen vacancies on lithium vacancy formation and diffusion in Li2-xMnO3-δ10.1016/j.ssi.2016.02.019 ↗
49. Mechanism of electrochemical activity in Li 2 MnO 310.1021/cm030047u ↗
50. Lithium concentration dependent elastic properties of battery electrode materials from first principles calculations10.1149/2.0031411jes ↗
51. Structural and chemical evolution of the layered Li-Excess LixMnO3 as a function of Li content from first-principles calculations10.1002/aenm.201400498 ↗